Dimetix DAN-10-150 replacement guide

Independent evaluation guide — not an official Dimetix document. Keyword pairing does not establish equivalence. Source completeness does not establish compatibility or a current commercial offer.

Planning a controlled replacement

A Dimetix DAN-10-150 replacement project should begin with a record of the installed component, hardware revision, cable assembly and host software behavior. Determine whether the change is driven by availability, packaging, performance or maintenance before choosing a candidate. ERDI LRF0305C appears in the supplied keyword mapping as a discussion candidate only; this page does not claim drop-in compatibility or an approved substitution.

Review mechanical, electrical and software changes as separate work items. Compare mounting features, optical clearance, connector orientation, power requirements and data handling against source documents. Preserve the original configuration and define how to reverse the change if the prototype fails acceptance. A successful distance reading on a workbench does not establish correct operation across the full environment or every host-system error condition.

Agree on a staged validation plan covering startup, normal measurement, invalid results, reconnection and representative field conditions. Retain logs and document any adapter, firmware or calibration changes introduced during the trial. Ask ERDI to review the intended application and the evidence gaps for LRF0305C before ordering a production quantity. Approve the substitution only after the responsible system owner has reviewed the test results.

Source-gated comparison

Competitor values use the supplied source URL, capture date and confidence record; ERDI values additionally require a matching source excerpt. Capture dates record retrieval, not publication or revision dates. Missing or unsupported entries stay marked as Not published, describing a gap in the supplied evidence rather than an exhaustive vendor search.

Dimetix DAN-10-150 | ERDI LRF0305C | parameter verification
ParameterDimetix DAN-10-150ERDI LRF0305C
Measurement range (m)Natural surfaces 0.05...100 m (datasheet: 0.05...~100 m); Dimetix orange reflective foil ~…≥ 4000m @60% Reflectivity, Building Target ≥3000m @30% Reflectivity, 2.3×2.3m Target ≥1500m @30% Reflectivity, 0.5×1.7m Target ≥800m @30% Reflectivity, 0.2×0.3m Target
Accuracy (cm)±1.0 mm @2σ (±0.5 mm @1σ), typical; repeatability ±0.3 mm @2σ (±0.15 mm @1σ)±1 m
Update rate (Hz)Max. measuring rate 100 Hz (TRM fn.11: 100 Hz valid for prod…Not published
Electrical interface and protocolAnalog 0/4...20 mA programmable (max error ±0.1%); 1 digital input; 2 …Not published
Supply voltage (V)12...30 VDC; 0.15 A @24 VDC / …DC 3~5V
Wavelength (nm)620-690 nm (red, typical 655 n…Not published
Field of view (deg)Not publishedNot published
Published price (USD)Not publishedNot published

Evidence and limitations

Dimetix DAN-10-150 source record

Source: https://dimetix.com/wp-content/uploads/2025/08/TechnicalReferenceManual_DSeries_V116.pdf (captured , confidence high)

ERDI LRF0305C source record

SOURCE_URL: https://erdilrf.com/models/lrf0305c/
CAPTURED_AT:

≥ 4000m @60% Reflectivity, Building Target ≥3000m @30% Reflectivity, 2.3×2.3m Target ≥1500m @30% Reflectivity, 0.5×1.7m Target ≥800m @30% Reflectivity, 0.2×0.3m Target | ±1 m | DC 3~5V | ≤ 27×25×15.5mm(L×W×H)

Frequently asked questions

Is ERDI LRF0305C a drop-in replacement for DAN-10-150?

No drop-in claim is made. Mechanical, electrical, protocol and system behavior require separate review and acceptance testing for the actual application.

Why are some DAN-10-150 comparison cells marked Not published?

The supplied parameter record lacks a usable value or complete source metadata. ERDI entries additionally require a supporting source excerpt. These are evidence gaps in this record, not zero values and not proof that the feature is absent.

How do I ask ERDI about LRF0305C?

Use the model link to review the candidate, then send the intended application, target conditions, host interface and quantity through the contact page. Request the applicable documents and a scoped assessment rather than assuming compatibility.

Discuss the ERDI candidate

Provide the required measurement function and operating conditions so the candidate can be assessed against the application. Model names and this planning association alone do not constitute a compatibility recommendation.