Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

LRF0305C is a 1535±5nm laser rangefinder module from ERDI LASER. Ranging accuracy: ±1 m. Interface: UART(TTL 3.3V). From $300 per unit, shipping included (lowest published tier, 500+ pieces; see the volume table below). Updated: 2026-11-06.

How LRF0305C differs from neighboring models

ItemLRF0305CLRF0405C
Range≥ 1500 m (2.3×2.3 m target, 30% reflectance)4,000 m or more at 30% reflectance and visibility of at least 6 km
Accuracy±1 m+/-2 m
Beam divergence≤0.6 mrad0.6 mrad or less
InterfaceUART(TTL 3.3V)UART, 3.3 V TTL level
SupplyDC 3~5V—
Size≤ 27×25×15.5mm(L×W×H)48 x 30.5 x 21 mm
Published priceFrom $300 USD / unitFrom $400 USD / unit

Related models: LRF0405C.

LRF0305C frequently asked questions

What is the measurement range of the LRF0305C?
Actual reach depends on target reflectivity, size and visibility.
What laser wavelength and interface does the LRF0305C use?
Wavelength: 1535±5nm. Interface: UART(TTL 3.3V). Supply: DC 3~5V.
How accurate is the LRF0305C?
Published ranging accuracy: ±1 m. Update rate: 1Hz ~10Hz.
How much does the LRF0305C cost?
From $300 per unit, shipping included, at 500+ pieces. Smaller quantities use the higher tiers in the volume table (single-piece tier: $500).
What laser safety class is stated for the LRF0305C?
Class I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Published range
≥ 4,000m @60% Reflectivity, Building Target ≥3,000m @30% Reflectivity, 2.3 × 2.3m Target ≥1,500m @30% Reflectivity, 0.5 × 1.7m Target ≥800m @30% Reflectivity, 0.2 × 0.3m TargetVisibility > 8km
Interface
UART(TTL 3.3V)
Wavelength
1535±5nm
Weight
≤14 ±1 g

The details

LRF0305C specifications

Read every value with its conditions. View the model documents for integration.

1. LRF0305C module specifications

LRF0305C 1. LRF0305C module specifications
ParameterSpecification & conditions
Laser Wavelength1535±5nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Divergence Angle≤0.6 mrad
Laser Energy≥100 μJ
Field of view (FOV)Approximately 7.4 mrad
Maximum Measuring Range (Visibility > 8km)≥ 4,000m @60% Reflectivity, Building Target ≥3,000m @30% Reflectivity, 2.3 × 2.3m Target ≥1,500m @30% Reflectivity, 0.5 × 1.7m Target ≥800m @30% Reflectivity, 0.2 × 0.3m TargetVisibility > 8km
Minimum Range≤10 m
Ranging Frequency1Hz ~10Hz
Multi-Target DetectionUp to 3 targets
Ranging Accuracy±1 m
Accuracy Rate≥98%
False Alarm Rate≤1%
Interface TypeUART(TTL 3.3V)
Power Supply VoltageDC 3~5V
Standby Power Consumption (Full Temperature Range)≤10mW (Power on pulled low)
Operating power consumption — full temperature range5 V: ≤0.9 W at 1 Hz; <1.5 W at 10 Hz
Peak Power Consumption<3W@5V
Start-up Time≤350ms (After startup, response time <20 ms)
Weight≤14 ±1 g
Dimensions≤ 27 × 25 × 15.5mm(L×W×H)
Shock1200g, 1ms
Vibration5~50~5 Hz, 1 octave/min, 2.5g
Operating Temperature−40 °C to+70 °C
Storage Temperature−45 °C to+70 °C
ReliabilityMTBF>1500h
PinDefinitionDescription
1POWER_ONModule Power Switch, TTL 3.3V Level; Module On (>2.7V), Module Off (<0.3V)
2UART_RXSerial Port Receiver, TTL 3.3V Level
3UART_TXSerial Port Transmitter, TTL 3.3V Level
4NC
5Power PositivePower Supply, 3~5V
6GNDSerial Port Ground

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LRF0305C 1535 nm Laser Rangefinder Module

LRF0305C is a laser rangefinder module for UAV payloads, with a published test range of 4 km and a UART interface. Confirm target conditions, configuration and the current datasheet before integration.

LRF0305C is a 27 × 25 × 15.5 mm, ≤14 g 1535 nm rangefinder built around the MINI-100 source, for compact devices that need kilometre-class ranging with ±1 m accuracy from 3–5 V.

WhatsApp about LRF0305C
From $300 USD / unitLowest published unit price at 500+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–19 piecesBase tier$500 USDPublished unit price
20–100 pieces$450 USDSave 10%
101–299 pieces$400 USDSave 20%
300–499 pieces$350 USDSave 30%
500+ piecesLowest unit price$300 USDLowest published price · Save 40%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF0305C against nearby models

LRF0305C and LRF0306C are the same hardware with different update ceilings: 1–10 Hz here, 1–3 Hz on the 0306C, which also lowers operating draw (<1.1 W at 3 Hz against <1.5 W at 10 Hz).

Reference figures: ≥3000 m on a 30% building target and ≥4000 m at 60% reflectivity, with visibility above 8 km; minimum range ≤10 m.

For a larger box with a 4.5–16 V input, see LRF0310C (48 × 30.5 × 21 mm, ER100 source). Published unit prices start at $300 at 500+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LRF0305C datasheet values

Figures are reproduced from the LRF0305C datasheet. Read each value together with the test condition printed beside it.

Specifications

LRF0305C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is MINI-100; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.

1. LRF0305C module specifications

LRF0305C — TECHNICAL SPECIFICATIONS

Laser Wavelength

1535±5nm

Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.

Divergence Angle

≤0.6 mrad

Laser Energy

≥100 μJ

Field of view (FOV)Approximately 7.4 mrad

Maximum Measuring Range

(Visibility > 8km)

≥ 4000m @60% Reflectivity, Building Target

≥3000m @30% Reflectivity, 2.3×2.3m Target

≥1500m @30% Reflectivity, 0.5×1.7m Target

≥800m @30% Reflectivity, 0.2×0.3m Target

Minimum Range

≤10 m

Ranging Frequency

1Hz ~10Hz

Multi-Target Detection

Up to 3 targets

Ranging Accuracy

±1 m

Accuracy Rate

≥98%

False Alarm Rate

≤1%

Interface Type

UART(TTL 3.3V)

Power Supply Voltage

DC 3~5V

Standby Power Consumption

(Full Temperature Range)

≤10mW (Power on pulled low)

 

≤0.8W (Power on pulled high)

Operating power consumption — full temperature range5 V: ≤0.9 W at 1 Hz; <1.5 W at 10 Hz

 

5V,<1. 5W@10Hz

Peak Power Consumption

<3W@5V

Start-up Time

≤350ms (After startup, response time <20 ms)

Weight≤14 ±1 g

Dimensions

≤ 27×25×15.5mm(L×W×H)

Shock

1200g, 1ms

Vibration

5~50~5 Hz, 1 octave/min, 2.5g

Operating Temperature

-40℃ to+70℃

Storage Temperature

-45℃ to+70℃

Reliability

MTBF>1500h

LRF0305C — PIN INTERFACE

Pin

Definition

Description

1

POWER_ON

Module Power Switch, TTL 3.3V Level;

Module On (>2.7V), Module Off (<0.3V)

2

UART_RX

Serial Port Receiver, TTL 3.3V Level

3

UART_TX

Serial Port Transmitter, TTL 3.3V Level

4

NC

 

5

Power Positive

Power Supply, 3~5V

6

GND

Serial Port Ground

Model-specific mechanical and interface drawings

LRF0305C OUTLINE DIMENSION(mm) source drawing 1
LRF0305C: OUTLINE DIMENSION(mm).
LRF0305C OUTLINE DIMENSION(mm) source drawing 2
LRF0305C: OUTLINE DIMENSION(mm).
LRF0305C OUTLINE DIMENSION(mm) source drawing 3
LRF0305C: OUTLINE DIMENSION(mm).

2. MINI-100 source-laser specifications

MINI-100 standalone laser component
ParameterValue
Optical wavelength1535 nm
Pulse energy≥100 µJ
Optical pulse width3.5 ns
Repetition rate1–10 Hz
Raw beam diameter0.3 mm
Initial beam divergence≤10 mrad
Transverse modeTEM00
Operating temperature−40 to +65 °C
Storage temperature−55 to +85 °C
Package dimensions14.5 × 6.3 × 4.37 mm
Mass2.5 g
Drive pulse width≤1 ms
Component electrical entry2 V, 12 A
Pulse stability10% (definition/statistical method not stated)
Shock / vibration entries1500 G, 0.5 ms / 20–2000 Hz, 20 G; tested to the factory environmental test procedure (details on request)
Stated service life≥10 million shots; test conditions not supplied

The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.

3. APD-A13B001 receiver-component specifications

Small screens: swipe the table horizontally to read all measurement conditions.

Supplied APD200 document — component values and conditions
ParameterValueMeasurement condition / scope
Device / active diameterAPD-A13B001 R01 / 200 µmSupplied APD200 document, p1
Detector spectral response interval800–1700 nmDetector response; not the filter passband
Responsivity0.9 A/W minimum; 1.0 A/W typicalλ = 1550 nm; incident power = 1 µW; M = 1
Dark current8 nA typical; 50 nA maximumVR = VBR − 3 V; incident power = 0
Multiplication factorM ≥10 / M ≥30λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V
−3 dB bandwidth0.6 GHz minimum; 1.25 GHz typicalM = 10; RL = 50 Ω
Breakdown voltage35–50 VReverse current = 10 µA; incident power = 0
Capacitance1.8 pF typical; 2.0 pF maximumVR = VBR − 3 V; f = 1 MHz
Breakdown temperature coefficient0.05 minimum / 0.11 typical / 0.15 maximum V/°CReverse current = 10 µA; dark; −55 to +85 °C
Operating / storage temperature−40 to +85 °C / −55 to +125 °CComponent absolute-maximum table; not module environmental ratings
Maximum biasVBRAbsolute maximum, not a recommended operating setpoint
Maximum forward / reverse current5 mA / 3 mAAbsolute maximum ratings, not continuous design targets
Filter centre wavelength1535 ±5 nmSupplied filter table, p3
Filter FWHM<37 nmFull width at half maximum
Transmission at centre wavelength>90%Filter specification, not total receiver throughput
Blocking specificationT <1%; source lists 400–1750 nmStop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength.
Optical surface quality60/40Source label: surface quality; not a transmission value

Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.

Integration checklist
INTEGRATION

Integrating LRF0305C into your design

  • Supply: DC 3–5 V. At 5 V the module draws ≤0.9 W at 1 Hz and <1.5 W at 10 Hz, with peaks below 3 W.
  • Power control: standby is ≤10 mW with the power-on line pulled low and up to 0.8 W when pulled high, so drive it low when idle.
  • Start-up: allow ≤350 ms after power-on; after that the response time is under 20 ms.
  • Interface: UART at 3.3 V TTL. Receiver field of view is about 7.4 mrad against a ≤0.6 mrad beam, which eases boresight tolerance.
Applications
APPLICATIONS

Where LRF0305C is used

  • Compact handheld rangefinders. Small enclosures where a 14 g module and a single-cell supply matter.
  • Lightweight drone payloads. Distance for mapping and inspection cameras on small airframes.
  • Smart optics. Digital observation devices that overlay distance on the display.
Questions & answers
FAQ

LRF0305C integration questions

LRF0305C or LRF0306C?

Same size and optics. Choose LRF0305C for up to 10 Hz, LRF0306C if 1–3 Hz is enough and you want lower operating power.

How fast is the first reading after power-on?

Start-up is ≤350 ms; subsequent responses come in under 20 ms.

What reliability figure is given?

The datasheet lists MTBF above 1500 h.

HARDWARE

LRF0305C mounting, wiring and commands

Taken from the LRF0305C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two M1.6 threaded mounting holes, 3.5 mm deep, on the front face either side of the emitter window. Hole spacing is not dimensioned on the drawing; the datasheet includes a recommended bracket cut-out.

Request the LRF0305C STEP model for your bracket design.

Serial settings

Default baud rate
115200 bit/s
Frame format
8N1
Checksum
Low 8 bits of the sum of the device code, command code and parameter bytes (header and length byte excluded).

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurementEE 16 02 03 02 05—Reply: EE 16 06 03 02 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Continuous measurementEE 16 02 03 04 07—Reply (repeated): EE 16 06 03 04 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Stop measurementEE 16 02 03 05 08EE 16 02 03 05 08Reply echoes the command.
Self-testEE 16 02 03 01 04—Reply: EE 16 06 03 01 S3 S2 S1 S0 CS (status bytes).
First-target modeEE 16 03 03 03 01 07EE 16 02 03 03 0602 = last target, 03 = multi-target.
Read serial numberEE 16 02 03 A9 AC—

Frames follow the LRF0305C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF0305C

Answered by ERDI engineers in the community.

Ask an engineer about LRF0305C

LRF0305C quick answers

What are the LRF0305C dimensions?
≤ 27 × 25 × 15.5mm(L×W×H).
How much does the LRF0305C weigh?
≤14 ±1 g.
Which interface does the LRF0305C use?
UART(TTL 3.3V).
How much does one LRF0305C cost?
$500 for 1 piece, shipping included. Volume price from $300 at 500+ pieces.
What is the minimum order for the LRF0305C?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF0305C lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF0305C for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).