Independent evaluation guide — not an official Garmin document. Keyword pairing does not establish equivalence. Source completeness does not establish compatibility or a current commercial offer.
Qualifying an alternative
When investigating a Garmin LIDAR-Lite v3 alternative, write down the function the existing device performs before comparing model names. A distance reading, a scan, a point cloud and a handheld measurement workflow are not interchangeable deliverables. The keyword mapping to ERDI LRF22VB is a starting point for discussion only. It does not establish equivalent sensing architecture, coverage, software support or performance.
Build a requirement matrix covering target type, working distance, update behavior, measurement uncertainty, ambient conditions and physical space. Then check power, electrical signal levels, host protocol and required accessories against original documents. A candidate that meets one headline distance figure may still fail the application because its coverage, timing, mounting or communication behavior is different. Document both matched requirements and unresolved questions.
Before committing to a change, agree on a representative bench test and a field test with explicit acceptance criteria. Include difficult surfaces, expected lighting, vibration, startup behavior and loss-of-signal handling where relevant to the application. Ask ERDI to assess the proposed use case against the delivered revision of LRF22VB. Keep the original component available until the alternative has passed the agreed system-level checks.