Slamtec RPLIDAR A1 price guide

Independent evaluation guide — not an official Slamtec document. Keyword pairing does not establish equivalence. Source completeness does not establish compatibility or a current commercial offer.

Building a comparable quotation

A useful Slamtec RPLIDAR A1 price request needs an exact part identifier, quantity, destination and required delivery date. Separate the sensor from evaluation boards, cables, accessories and software that may appear in a bundled listing. An old catalog price is not a current offer. Any published price in the table is a captured source figure, not a binding or current commercial quotation.

Compare total integration cost as well as unit cost. Ask each supplier to state currency, quantity breaks, shipping, taxes, payment terms, warranty scope and quotation validity. Engineering work for a different connector, power rail, mechanical mount or data parser can outweigh a small purchase-price difference. Treat lead time and stock availability as separate confirmations rather than inferring either from a product page.

ERDI SPD1200ZG is a candidate named in the supplied planning list, not a confirmed equivalent or a priced replacement. Send the requirements and expected order quantity through the ERDI contact page to request a scoped quotation. Keep the resulting commercial document separate from the technical specification record, and repeat the comparison if configuration, quantity or delivery destination changes before ordering.

Source-gated comparison

Competitor values use the supplied source URL, capture date and confidence record; ERDI values additionally require a matching source excerpt. Capture dates record retrieval, not publication or revision dates. Missing or unsupported entries stay marked as Not published, describing a gap in the supplied evidence rather than an exhaustive vendor search.

Slamtec RPLIDAR A1 | ERDI SPD1200ZG | parameter verification
ParameterSlamtec RPLIDAR A1ERDI SPD1200ZG
Measurement range (m)0.15~12 m0.1–1200 m
Accuracy (cm)Not published±0.5 m at d ≤100 m; ±(0.5 m + 0.0007d) for 100 m < d <1200 m
Update rate (Hz)Not publishedNot published
Electrical interface and protocolUART, 3.3 V logicUART-TTL; customizable
Supply voltage (V)53.3–5 V
Wavelength (nm)Not publishedNot published
Field of view (deg)Not publishedNot published
Published price (USD)Not publishedNot published

Evidence and limitations

Slamtec RPLIDAR A1 source record

Source: https://www.slamtec.com/en/lidar/a1spec (captured , confidence medium)

ERDI SPD1200ZG source record

SOURCE_URL: https://erdilrf.com/models/spd1200zg/
CAPTURED_AT:

0.1–1200 m | ±0.5 m at d ≤100 m; ±(0.5 m + 0.0007d) for 100 m < d <1200 m | UART-TTL; customizable | 3.3–5 V | 7.2 × 14.7 × 22.3 mm (body; excludes mounting features)

Frequently asked questions

Does this page quote a current RPLIDAR A1 price?

No binding current commercial quote is supplied. A source price, if shown, is a captured public listing. Request a dated quotation with quantity, currency, destination, configuration and validity before comparing purchasing costs.

Why are some RPLIDAR A1 comparison cells marked Not published?

The supplied parameter record lacks a usable value or complete source metadata. ERDI entries additionally require a supporting source excerpt. These are evidence gaps in this record, not zero values and not proof that the feature is absent.

How do I ask ERDI about SPD1200ZG?

Use the model link to review the candidate, then send the intended application, target conditions, host interface and quantity through the contact page. Request the applicable documents and a scoped assessment rather than assuming compatibility.

Discuss the ERDI candidate

Provide the required measurement function and operating conditions so the candidate can be assessed against the application. Model names and this planning association alone do not constitute a compatibility recommendation.