Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationSpecifications & CAD
How to buy
Samples & quotationsDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

LRF10VB · 940 nm Single-Point LiDAR Sensor

LRF10VB datasheet: specifications, range conditions, interface

Every value below is copied from the published LRF10VB specification table with its test condition, so you can compare it with other modules on equal terms.

LRF10VB key specifications

ItemPublished value
ModelLRF10VB
Published range0.05–9 m (90% reflectivity); 0.05–5 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.)
Wavelength940 nm
InterfaceUART
Accuracy±5 cm (<5 m); 1% (≥5 m)
Update rate50 Hz
Supply4.5–5.5 V DC
Weight1 g
Dimensions12 × 7.5 × 9.1 mm
Laser safetyClass 1
PriceFrom $6 per unit

Full specification table

ERDI published product specifications, captured 2026-10-08.

ParameterPublished valueCondition / note
Measurement range0.05–9 m (90% reflectivity); 0.05–5 m (10% reflectivity)The two source values remain bound to their stated target reflectivity.
Measurement frequency50 HzConfirm against the controlled model document
Accuracy±5 cm (<5 m); 1% (≥5 m)Confirm against the controlled model document
Repeatability±10 mmConfirm against the controlled model document
Ambient-light immunity2 m at 70 klx90% reflector in an outdoor environment at 25°C, per source footnote.
Reported resolution1 mmFront-page feature statement; not an accuracy value
Laser wavelength940 nmControlled PDF V3.0 source value
Photobiological safetyClass 1Confirm against the controlled model document
Field of view3°Confirm against the controlled model document
Wavelength for indicationN/AConfirm against the controlled model document
Photobiological safety for indicationN/AConfirm against the controlled model document
Supply voltage4.5–5.5 V DCConfirm against the controlled model document
Peak current5 V at 4.5 mAConfirm against the controlled model document
Average current5 V at 4 mAConfirm against the controlled model document
Average power consumption<0.1 W (supports low-power mode)Confirm against the controlled model document
InterfaceUARTConfirm against the controlled model document
Protection levelN/AConfirm against the controlled model document
Dimensions12 × 7.5 × 9.1 mmConfirm against the controlled model document
Weight1 gConfirm against the controlled model document
Operating temperature−20 °C to +60 °CConfirm against the controlled model document
Wire specification4-pin 1.25 mm terminal, 10 cm tinned stranded wiresConfirm against the controlled model document
CustomizationAvailable in appearance / structure / output protocolConfirm against the controlled model document

Published applications

  • Camera autofocus
  • Security monitoring
  • Smart devices

Ordering the LRF10VB

The published single-unit price of the LRF10VB is $10, falling to $6 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: LRF10VB model page.

FAQ

What is the maximum range of the LRF10VB?

The published range is 0.05–9 m (90% reflectivity); 0.05–5 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.

Which interface does the LRF10VB use?

The published communication interface is UART.

What laser wavelength does the LRF10VB use?

The published wavelength is 940 nm; laser safety entry: Class 1.

How much does the LRF10VB cost?

The published single-unit price of the LRF10VB is $10, falling to $6 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com.

Related guides

Model records

Open the model page for the full specification table, downloads, published price and ordering.

  • LRF10VB — LRF10VB 940 nm Single-Point LiDAR Sensor
  • LRF22VB — LRF22VB 905 nm Single-Point LiDAR Sensor
  • LRF50H — LRF50H 905 nm LiDAR Distance Sensor
  • LRF50VB — LRF50VB 905 nm Single-Point LiDAR Sensor
  • LRF100H — LRF100H 905 nm LiDAR Distance Sensor