Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥800 μJ
Pulse width
7 ns
Wavelength
1535nm
Weight
18 g

The details

ER800 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

ER800 Specifications
ParameterSpecification & conditions
ModelER800
Laser Wavelength1535nm

Technical specifications

ER800 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

ER800 Specifications
ParameterSpecification & conditions
Pulse energy≥800 μJ
Laser Pulse width7 ns
Drive pulse width≤ 3 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 7 mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 75 °C
Dimension (mm)40 × 8 × 7.5 mm
Weight18 g
Voltage2 V
Electric current30 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

ER800 1535 nm Erbium-Glass Laser Source

ER800 1535 nm Erbium-Glass Laser Source. Compare pulse energy, pulse width, repetition rate, drive requirements and model documents.

ER800 is a ≥800 µJ, 1535 nm erbium-glass source in a 40 × 8 × 7.5 mm, 18 g package for long-range instruments that still need a slim, board-mounted transmitter.

WhatsApp about ER800
From $1,050 USD / unitLowest published unit price at 301+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$1,400 USDPublished unit price
11–30 pieces$1,300 USDSave 7%
31–200 pieces$1,200 USDSave 14%
201–300 pieces$1,100 USDSave 21%
301+ piecesLowest unit price$1,050 USDLowest published price · Save 25%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing ER800 against nearby models

ER800 and ER900 share the 40 × 8 × 7.5 mm body. ER900 adds 100 µJ but limits the rate to 1–5 Hz; ER800 keeps 1–10 Hz.

Below it, ER500 gives ≥500 µJ in 35 mm and 12 g. Above it, ER2000 moves to millijoule energy in a 60 × 25 × 13.5 mm, 105 g module with a ≤5 V supply.

Published unit prices start at $1,050 at 301+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

ER800 datasheet values

Figures are reproduced from the ER800 datasheet. Read each value together with the test condition printed beside it.

Specifications

ER800 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥800 μJ and optical pulse width 7 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

ER800 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelER800
Laser Wavelength1535nm
Laser classificationClass 1
Pulse energy≥800 μJ
Laser Pulse width7 ns
Drive pulse width≤ 3 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 7 mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 75℃
Dimension (mm)40×8×7.5 mm
Weight18 g
Voltage2 V
Electric current30 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Reading this model's optical specifications

The recorded raw beam diameter is 0.3 mm and divergence is ≤ 7 mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

ER800 outline drawing retained from the original product record
ER800: original outline drawing. Verify the ordered variant and tolerances against its current mechanical drawing.
Integration checklist
INTEGRATION

Integrating ER800 into your design

  • Drive: 2 V component entry. Confirm the drive current and pulse width for your batch before finalising the driver.
  • Beam: ≤7 mrad raw divergence.
  • Repetition: 1–10 Hz. Average heat scales with rate; plan conduction to the housing.
  • Temperature: −40 °C to +65 °C.
Applications
APPLICATIONS

Where ER800 is used

  • Long-range survey instruments. Distance to distant structures and terrain.
  • Fixed monitoring stations. Ranging over long sight lines from masts and towers.
  • High-energy lab work. Time-of-flight and atmospheric experiments at 1535 nm.
Questions & answers
FAQ

ER800 integration questions

ER800 or ER900?

Same size. ER900 gives ≥900 µJ at 1–5 Hz; ER800 gives ≥800 µJ at 1–10 Hz.

How does ER800 compare with ER2000?

ER2000 delivers ≥2 mJ but is a much larger 60 × 25 × 13.5 mm, 105 g module with a ≤5 V supply.

Does ER800 need active cooling?

The datasheet gives an operating range of −40 °C to +65 °C. Most designs use conduction to the housing; confirm with your duty cycle.

HARDWARE

ER800 mounting, wiring and commands

Taken from the ER800 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two Φ2.4 mm mounting holes in the side lugs, 12 mm apart centre to centre. Recommended fastening torque 0.2 N·m. Screw size is not stated on the drawing.

Request the ER800 STEP model for your bracket design.

Engineering Q&A

Questions about ER800

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about ER800

ER800 quick answers

How much does the ER800 weigh?
18 g.
How much does one ER800 cost?
$1,400 for 1 piece, shipping included. Volume price from $1,050 at 301+ pieces.
What is the minimum order for the ER800?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the ER800 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss ER800 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).