Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥100 μJ
Pulse width
3.5 ns
Wavelength
1535 nm
Weight
2.5 g

The details

MINI-100 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

MINI-100 Specifications
ParameterSpecification & conditions
ModelMINI-100
Wavelength1535 nm

Technical specifications

MINI-100 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

MINI-100 Specifications
ParameterSpecification & conditions
Pulse energy≥100 μJ
Laser Pulse width3.5 ns
Drive pulse width≤ 1ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 10 mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 85 °C
Dimension (mm)14.5 × 6.3 × 4.37 mm
Weight2.5 g
Voltage2 V
Electric current12 A
Impact1500 G, 0.5 ms; tested to the factory environmental shock test procedure (details on request)
Vibration20~2000 Hz/20 G; tested to the factory environmental vibration test procedure (details on request)
Service life≥10 million times

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

MINI-100 1535 nm Erbium-Glass Laser Source

MINI-100 is an erbium-glass laser source for OEM integration. Confirm target conditions, configuration and the current datasheet before integration.

MINI-100 is our smallest 1535 nm erbium-glass source: a 14.5 × 6.3 × 4.37 mm, 2.5 g emitter for designers squeezing an eye-safe-wavelength rangefinder into handheld or wearable products.

WhatsApp about MINI-100
From $100 USD / unitLowest published unit price at 1000+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$140 USDPublished unit price
11–50 pieces$130 USDSave 7%
51–200 pieces$120 USDSave 14%
201–500 pieces$110 USDSave 21%
501–999 pieces$105 USDSave 25%
1000+ piecesLowest unit price$100 USDLowest published price · Save 29%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing MINI-100 against nearby models

Against ER100 (21 × 8 × 6.8 mm, 7 g, ≤8 mrad) MINI-100 gives the same ≥100 µJ pulse energy class in roughly a third of the mass, at the cost of a wider ≤10 mrad raw divergence that your collimating optic has to correct.

If you need more energy in a still-compact package, ER200 and ER300 move to 200 µJ and ≥300 µJ. MINI-100 is the source referenced by the compact LRF0305C and LRF0306C rangefinders, which is a quick way to evaluate it in a finished module first.

Published unit prices start at $100 at 1000+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

MINI-100 datasheet values

Figures are reproduced from the MINI-100 datasheet. Read each value together with the test condition printed beside it.

Specifications

MINI-100 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥100 μJ and optical pulse width 3.5 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

MINI-100 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelMINI-100
Wavelength1535 nm
Laser classificationClass 1
Pulse energy≥100 μJ
Laser Pulse width3.5 ns
Drive pulse width≤ 1ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 10 mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 85℃
Dimension (mm)14.5×6.3×4.37 mm
Weight2.5 g
Voltage2 V
Electric current12 A
Impact1500 G, 0.5 ms; tested to the factory environmental shock test procedure (details on request)
Vibration20~2000 Hz/20 G; tested to the factory environmental vibration test procedure (details on request)
Service life≥10 million times

Reading this model's optical specifications

The recorded raw beam diameter is 0.3 mm and divergence is ≤ 10 mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

MINI-100 outline drawing retained from the original product record
MINI-100: original outline drawing. Verify the ordered variant and tolerances against its current mechanical drawing.
Integration checklist
INTEGRATION

Integrating MINI-100 into your design

  • Electrical: the component entry is a 2 V drive. Design the pump driver around the drive current and pulse width given in the current datasheet for your batch.
  • Optics: with ≤10 mrad divergence from the bare source, plan the transmit lens focal length first; it sets both the final beam divergence and the length of your optical stack.
  • Thermal and mechanical: −40 °C to +65 °C operating. At 2.5 g the part is easy to place, but keep it on a thermally conductive pad rather than floating on the PCB.
  • Repetition: 1–10 Hz. Higher rates raise average pump power, so check battery life at your intended update rate.
Applications
APPLICATIONS

Where MINI-100 is used

  • Pocket and wearable rangefinders. Compact optical heads where every gram and millimetre of the transmitter counts.
  • Small UAV payloads. Lightweight distance sensing on small multirotors where a 1535 nm wavelength is preferred.
  • Evaluation of 1535 nm ranging. A low-cost source for prototyping a receiver chain before committing to a larger emitter.
Questions & answers
FAQ

MINI-100 integration questions

Is MINI-100 interchangeable with ER100?

Both records list ≥100 µJ, but MINI-100 lists 1535 nm, a 3.5 ns optical pulse, a drive pulse ≤1 ms and 12 A; ER100 lists 1.54 μm, a 6 ns optical pulse, a drive pulse ≤2.4 ms and 8 A. Their dimensions also differ: 14.5 × 6.3 × 4.37 mm versus 21 × 8 × 6.8 mm. Confirm the controlled drive requirements, optical configuration and mechanical drawings for both ordered versions before substitution. The same listed minimum pulse energy does not establish interchangeability or receiver compatibility.

What range can I expect from a MINI-100 design?

Range depends on your receiver, optics, target and atmosphere, not on the source alone. Use a finished module such as LRF0305C as a reference point and confirm on your own targets.

Does the source carry a laser class?

Classification applies to the finished, evaluated product. Your instrument needs its own assessment under IEC 60825-1.

HARDWARE

MINI-100 mounting, wiring and commands

Taken from the MINI-100 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two Ø1.8 mm through holes for mounting. No thread specification is printed on the drawing.

Request the MINI-100 STEP model for your bracket design.

Engineering Q&A

Questions about MINI-100

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about MINI-100

MINI-100 quick answers

How much does the MINI-100 weigh?
2.5 g.
How much does one MINI-100 cost?
$140 for 1 piece, shipping included. Volume price from $100 at 1,000+ pieces.
What is the minimum order for the MINI-100?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the MINI-100 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss MINI-100 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).