Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Published range
≥3,000 m2.3 × 2.3 m reference target, reflectance 30%
Wavelength
1535±5nm
Weight
≤32±1 g
Supply
4.5V~16V

The details

LRF0310C specifications

Read every value with its conditions. View the model documents for integration.

Additional specifications

LRF0310C Additional specifications
ParameterSpecification & conditions
ProjectPerformance I ndicators
ModelLRF0310C
Laser Wavelength1535±5nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Divergence Angle≤0.6 mrad
Laser Energy≥100 μJ
Launch Lens DiameterØ8 mm
Receiver Lens DiameterØ16 mm

Technical specifications

LRF0310C Technical specifications
ParameterSpecification & conditions
Measuring range≥3,000 m2.3 × 2.3 m reference target, reflectance 30%

Additional specifications

LRF0310C Additional specifications
ParameterSpecification & conditions
Minimum Range≤15 m
Ranging FrequencySingle, 1Hz ~10Hz
Number of multi-target detectionsUp to 3 targets
Ranging Accuracy±1 m
Range Resolution≤0.1 m
Precision Rate≥98%
False Alarm Rate≤1%
Supply Voltage4.5V~16V
Standby power consumption≤ 0.6W
Average power consumption≤1.5W@1Hz
Peak Power Consumption≤7W@12V
Weight≤32±1 g
Dimension (L×W×H)48mm × 30.5mm × 21mm
Operating Temperature−40~+70 °C
Storage Temperature−55~+75 °C
Impact ResistanceTested to the factory environmental shock test procedure (details on request)
Vibration ResistanceTested to the factory environmental vibration test procedure (details on request)
PinDefinitionDescription
P-1VIN+Power supply, 4.5–16V
P-2VIN-Power supply, ground
P-3POWER_ONModule power switch, TTL_3.3V level;
P-4UART_TXModule on (>2.7V), module off (<0.3V)
P-5UART_RXSerial port transmitting end, TTL_3.3V level
P-6GNDSerial port receiving end, TTL_3.3V level

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LRF0310C 1535 nm Laser Rangefinder Module

LRF0310C is a laser rangefinder module for OEM integration, with a published test range of 3 km. Confirm target conditions, configuration and the current datasheet before integration.

LRF0310C is a 48 × 30.5 × 21 mm, ≤32 g 1535 nm rangefinder with the ER100 source and a wide 4.5–16 V input, for vehicle and fixed equipment that wants ±1 m accuracy without a dedicated low-voltage rail.

WhatsApp about LRF0310C
From $300 USD / unitLowest published unit price at 500+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–19 piecesBase tier$500 USDPublished unit price
20–100 pieces$450 USDSave 10%
101–299 pieces$400 USDSave 20%
300–499 pieces$350 USDSave 30%
500+ piecesLowest unit price$300 USDLowest published price · Save 40%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF0310C against nearby models

Compared with LRF0305C, LRF0310C trades size for a wide-input supply and larger Φ8 / Φ16 mm optics; accuracy stays at ±1 m and the current record gives ≥3000 m on a reference target.

LRF0405C shares the same 48 × 30.5 × 21 mm envelope but uses a 200 µJ source and reaches ≥4,000 m at ±2 m. Pick LRF0310C when accuracy matters more than reach.

Published unit prices start at $300 at 500+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LRF0310C datasheet values

Figures are reproduced from the LRF0310C datasheet. Read each value together with the test condition printed beside it.

Specifications

LRF0310C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is ER100; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.

1. LRF0310C module specifications

LRF0310C — TECHNICAL SPECIFICATIONS

Project

Performance Indicators

Model

LRF0310C

Laser Wavelength

1535±5nm

Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.

Divergence Angle

≤0.6 mrad

Laser Energy

≥100 μJ

Launch Lens Diameter

Φ8 mm

Receiver Lens Diameter

Φ16 mm

Measuring range≥3000 m

Minimum Range

≤15 m

Ranging Frequency

Single, 1Hz ~10Hz

Number of multi-target detections

Up to 3 targets

Ranging Accuracy

±1 m

Range Resolution

≤0.1 m

Precision Rate

≥98%

False Alarm Rate

≤1%

Supply Voltage

4.5V~16V

Standby power consumption

≤ 0.6W

Average power consumption

≤1.5W@1Hz

Peak Power Consumption

≤7W@12V

Weight

≤32±1 g

Dimension (L×W×H)

48mm×30.5mm×21mm

Operating Temperature

-40~+70 ℃

Storage Temperature

-55~+75 ℃

Impact Resistance

Tested to the factory environmental shock test procedure (details on request)

Vibration Resistance

Tested to the factory environmental vibration test procedure (details on request)

LRF0310C — PIN INTERFACE

Pin

Definition

Description

Cable color

P-1

VIN+

Power supply, 4.5–16V

 

P-2

VIN-

Power supply, ground

 

P-3

POWER_ON

Module power switch, TTL_3.3V level;

 

P-4

UART_TX

Module on (>2.7V), module off (<0.3V)

 

P-5

UART_RX

Serial port transmitting end, TTL_3.3V level

 

P-6

GND

Serial port receiving end, TTL_3.3V level

 

Model-specific mechanical and interface drawings

LRF0310C OUTLINE DIMENSION(mm) source drawing 1
LRF0310C: OUTLINE DIMENSION(mm).
LRF0310C OUTLINE DIMENSION(mm) source drawing 2
LRF0310C: OUTLINE DIMENSION(mm).

2. ER100 source-laser specifications

ER100 standalone laser component
ParameterValue
Optical wavelength1.54 µm in the component table; 1535 nm in its description
Pulse energy≥100 µJ
Optical pulse width6 ns
Drive pulse width≤2.4 ms
Repetition rate1–10 Hz
Pulse stability10% (definition/statistical method not stated)
Raw beam diameter0.3 mm
Initial beam divergence≤8 mrad
Transverse modeTEM00
Operating / storage temperature−40 to +65 °C / −55 to +75 °C
Package dimensions / mass21 × 8 × 6.8 mm / 7 g
Component electrical entry2 V, 8 A
Shock / vibration entries1500 G, 0.5 ms / 20–2000 Hz, 20 G
Stated service life≥1 million shots in the specification table; introduction states 10 million without resolving the difference

The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.

3. APD-A13B001 receiver-component specifications

Small screens: swipe the table horizontally to read all measurement conditions.

Supplied APD200 document — component values and conditions
ParameterValueMeasurement condition / scope
Device / active diameterAPD-A13B001 R01 / 200 µmSupplied APD200 document, p1
Detector spectral response interval800–1700 nmDetector response; not the filter passband
Responsivity0.9 A/W minimum; 1.0 A/W typicalλ = 1550 nm; incident power = 1 µW; M = 1
Dark current8 nA typical; 50 nA maximumVR = VBR − 3 V; incident power = 0
Multiplication factorM ≥10 / M ≥30λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V
−3 dB bandwidth0.6 GHz minimum; 1.25 GHz typicalM = 10; RL = 50 Ω
Breakdown voltage35–50 VReverse current = 10 µA; incident power = 0
Capacitance1.8 pF typical; 2.0 pF maximumVR = VBR − 3 V; f = 1 MHz
Breakdown temperature coefficient0.05 minimum / 0.11 typical / 0.15 maximum V/°CReverse current = 10 µA; dark; −55 to +85 °C
Operating / storage temperature−40 to +85 °C / −55 to +125 °CComponent absolute-maximum table; not module environmental ratings
Maximum biasVBRAbsolute maximum, not a recommended operating setpoint
Maximum forward / reverse current5 mA / 3 mAAbsolute maximum ratings, not continuous design targets
Filter centre wavelength1535 ±5 nmSupplied filter table, p3
Filter FWHM<37 nmFull width at half maximum
Transmission at centre wavelength>90%Filter specification, not total receiver throughput
Blocking specificationT <1%; source lists 400–1750 nmStop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength.
Optical surface quality60/40Source label: surface quality; not a transmission value

Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.

Integration checklist
INTEGRATION

Integrating LRF0310C into your design

  • Supply: 4.5–16 V. Average consumption is ≤1.5 W at 1 Hz and peak ≤7 W at 12 V; standby is ≤0.6 W, so cut power entirely if the host sleeps for long periods.
  • Rates: single shot or 1–10 Hz, up to three echoes per measurement.
  • Minimum range is ≤15 m.
  • The reference-target description in the current record mixes 2.3 × 2.3 m and 2.3 × 4.6 m; ask us for the test sheet before you quote a range to your own customer.
Applications
APPLICATIONS

Where LRF0310C is used

  • Vehicle-mounted instruments. Direct operation from 12 V systems.
  • Fixed observation posts. Ranging from cameras on poles and buildings.
  • Construction and mining survey. Distance to faces and stockpiles with metre-level accuracy.
Questions & answers
FAQ

LRF0310C integration questions

Can LRF0310C run on 12 V directly?

Yes, the input range is 4.5–16 V.

How is it different from LRF0405C?

Same envelope. LRF0310C uses ER100 and is rated ±1 m; LRF0405C uses ER200 and reaches further at ±2 m.

What standby current should I expect?

Up to 0.6 W in standby, so switch the supply off for long idle periods.

HARDWARE

LRF0310C mounting, wiring and commands

Taken from the LRF0310C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Three M2.5 threaded mounting holes, 4.5 mm deep; the two holes shown on the side view are 26.5 mm apart. The position of the third hole is not dimensioned on the drawing.

Request the LRF0310C STEP model for your bracket design.

Serial settings

Logic level
3.3 V TTL
Default baud rate
115200 bit/s
Frame format
8N1
Checksum
Low 8 bits of the sum of the device code, command code and parameter bytes (header and length byte excluded).

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurementEE 16 02 03 02 05—Reply: EE 16 06 03 02 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Continuous measurementEE 16 02 03 04 07—Reply (repeated): EE 16 06 03 04 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Stop measurementEE 16 02 03 05 08EE 16 02 03 05 08Reply echoes the command.
Self-testEE 16 02 03 01 04—Reply: EE 16 06 03 01 S3 S2 S1 S0 CS (status bytes).
Set continuous rate to 1 HzEE 16 04 03 A1 01 00 A5EE 16 02 03 A1 A4Rate byte 0x01 to 0x0A; 0x05 = 5 Hz.
Read serial numberEE 16 02 03 A9 AC—Reply: EE 16 05 03 A9 MONYEAR NUM_H NUM_L CS.

Frames follow the LRF0310C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF0310C

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about LRF0310C

LRF0310C quick answers

How much does the LRF0310C weigh?
≤32±1 g.
What power does the LRF0310C need?
Supply: 4.5V~16V.
How much does one LRF0310C cost?
$500 for 1 piece, shipping included. Volume price from $300 at 500+ pieces.
What is the minimum order for the LRF0310C?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF0310C lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF0310C for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).