Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥10 mJ
Pulse width
12 ns
Wavelength
1535nm
Weight
220 g

The details

ER10000 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

ER10000 Specifications
ParameterSpecification & conditions
ModelER10000
Laser Wavelength1535nm

Technical specifications

ER10000 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

ER10000 Specifications
ParameterSpecification & conditions
Pulse energy≥10 mJ
Laser Pulse width12 ns
Drive pulse width≤ 4 ms
Pulse repetition rate1~5 Hz
Pulse stability5 %
Raw Beam Diameter0.8 mm
Beam divergence angle≤ 4mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 75 °C
Dimension (mm)110 × 40 × 24.5 mm
Weight220 g
Voltage≤ 14 V
Electric current100 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

ER10000 1535 nm Erbium-Glass Laser Source

ER10000 is a laser rangefinder module for OEM integration. Confirm target conditions, configuration and the current datasheet before integration.

ER10000 is our highest-energy 1535 nm erbium-glass module, ≥10 mJ per pulse at 1–5 Hz in a 110 × 40 × 24.5 mm, 220 g housing with a ≤14 V supply.

WhatsApp about ER10000
From $5,000 USD / unitLowest published unit price at 101+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–5 piecesBase tier$7,800 USDPublished unit price
6–10 pieces$7,700 USDSave 1%
11–50 pieces$6,800 USDSave 13%
51–100 pieces$6,000 USDSave 23%
101+ piecesLowest unit price$5,000 USDLowest published price · Save 36%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing ER10000 against nearby models

ER10000 shares its housing with ER8000; choose it only when the extra 2 mJ is needed by your link budget.

Smaller systems are usually better served by ER4000 (≥4 mJ, 105 g) or ER2000 (≥2 mJ, up to 10 Hz).

Published unit prices start at $5,000 at 101+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

ER10000 datasheet values

Figures are reproduced from the ER10000 datasheet. Read each value together with the test condition printed beside it.

Specifications

ER10000 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥10 mJ and optical pulse width 12 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

ER10000 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelER10000
Laser Wavelength1535nm
Laser classificationClass 1
Pulse energy≥10 mJ
Laser Pulse width12 ns
Drive pulse width≤ 4 ms
Pulse repetition rate1~5 Hz
Pulse stability5 %
Raw Beam Diameter0.8 mm
Beam divergence angle≤ 4mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 75℃
Dimension (mm)110×40×24.5 mm
Weight220 g
Voltage≤ 14 V
Electric current100 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Reading this model's optical specifications

The recorded raw beam diameter is 0.8 mm and divergence is ≤ 4mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

Open the ER10000 mechanical drawing in its current PDF (page 2)

The PDF identifies this model's 110 mm enclosure. Use its dimensioned mechanical drawing for the correct mounting geometry.

Integration checklist
INTEGRATION

Integrating ER10000 into your design

  • Supply: ≤14 V with enough current capacity for the pump pulses.
  • Rate: 1–5 Hz.
  • Beam: ≤4 mrad raw divergence; plan the collimator for your receiver field of view.
  • Temperature: −40 °C to +65 °C. Provide a solid thermal path at the upper end of the rate range.
Applications
APPLICATIONS

Where ER10000 is used

  • Maximum-reach ranging systems. Fixed instruments working over the longest sight lines.
  • Atmospheric lidar. Research systems that need the strongest 1535 nm pulses we supply.
  • Laboratory reference. High-energy source for detector and optics testing.
Questions & answers
FAQ

ER10000 integration questions

What makes ER10000 different from ER8000?

The listed pulse energy is ≥10 mJ against ≥8 mJ, and the listed optical pulse width is 12 ns against 13 ns. Size, mass, supply and repetition-rate entries match. These shared entries do not establish interchangeability; confirm the controlled drive requirements, optical configuration and mechanical drawings for both ordered versions before substitution.

Which supply does it need?

≤14 V according to the datasheet.

Is a laser class stated?

Classification applies to the finished product; your instrument needs its own assessment.

HARDWARE

ER10000 mounting, wiring and commands

Taken from the ER10000 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Three Φ4.4 mm mounting holes in the side lugs: one 55 mm from the left end on one side, two at 16 mm and 94 mm from the left end on the other side. Screw size is not stated on the drawing.

Request the ER10000 STEP model for your bracket design.

Engineering Q&A

Questions about ER10000

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about ER10000

ER10000 quick answers

How much does the ER10000 weigh?
220 g.
How much does one ER10000 cost?
$7,800 for 1 piece, shipping included. Volume price from $5,000 at 101+ pieces.
What is the minimum order for the ER10000?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the ER10000 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss ER10000 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).