Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Published range
0.2–1,200 m; up to 1,500 m at nightNot a guaranteed range: 1,500 m applies at night under favourable conditions. Strong sunlight or low visibility may reduce range.
Interface
UART-TTL, Customizable
Wavelength
905nm±5nm
Weight
≤10g

The details

SPD1200S2 specifications

Read every value with its conditions. View the model documents for integration.

Technical Specifications

SPD1200S2 Technical Specifications
ParameterSpecification & conditions
Laser Wavelength905nm±5nm
Laser Divergence Angle<6mrad
Optical MaterialResin aspherical lens
Receiving Aperture9.0mm × 14.5mm
Ranging Range0.2–1,200 m; up to 1,500 m at nightNot a guaranteed range: 1,500 m applies at night under favourable conditions. Strong sunlight or low visibility may reduce range.
Ranging Accuracy±0.3m (≤400m)±0.5m + d × 0.1% (400m<d<1,200m)
Ranging Frequency4Hz~15Hz Adaptive
Measurement Accuracy Rate≥98%
False Alarm Rate≤1%
Communication InterfaceUART-TTL, Customizable
Baud RateDefault: 115200bps
Supply Voltage3.3V~5V
Start-up Time≤200ms
Instant Start Current≈300mA
Operating Power ConsumptionAverage ≈0.5W,Max 0.75W
Operating Temperature−20 °C~+60 °C
Storage Temperature−40 °C~+60 °C
Protection GradeLens cavity IP67
Laser Safety ClassIEC CLASS I
Dimension24.6 × 14.45 × 26.3 mm
Weight≤10g

Electrical Interface Definition

SPD1200S2 Electrical Interface Definition
ParameterSpecification & conditions
1GNDPower −
2VCCPower +
3I/O (Reserved)Reserved for expansion
4TXDSignal output port, Ranging Module → Host
5RXDSignal input port, Host → Ranging Module
6SW-SHOTFunction Enable (active high) Note: Compatible with active-low control requirements

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

SPD1200S2 905 nm Laser Rangefinder Module

SPD1200S2 is a laser rangefinder module for OEM integration, with a published test range of 1.2 km and a UART interface. Confirm target conditions, configuration and the current datasheet before integration.

SPD1200S2 is a square 905 nm module (≤10 g) with a 0.2–1200 m catalogue range, for integrators who want very short minimum distance and ±0.3 m accuracy out to 400 m.

WhatsApp about SPD1200S2
$150 USD / unitPublished unit price; additional volume tiers require quotation. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1+ piecesBase tierLowest unit price$150 USDLowest published price
Additional volume bands require an approved quotation.ERDI does not publish unverified discounts. The sales team will confirm configuration, Incoterm, lead time and unit pricing after receiving the inquiry below.
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing SPD1200S2 against nearby models

Its 0.2 m minimum range is far shorter than the 4 m of the E family (LR1200E2). SPD1200Z2 offers the same catalogue range in a thinner 7.2 × 14.8 × 28.2 mm form with a faster 2–20 Hz output.

At night, under favourable conditions, it can reach up to 1,500 m; this is not a guaranteed range.

Published unit prices start at $150 at 1+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

SPD1200S2 datasheet values

Figures are reproduced from the SPD1200S2 datasheet. Read each value together with the test condition printed beside it.

ParameterValueConditions / notes
Dimensions24.6 × 14.45 × 26.3 mm
Measurement range0.2–1,200 m; up to 1,500 m at nightNot a guaranteed range: 1,500 m applies at night under favourable conditions. Strong sunlight or low visibility may reduce range.
Integration checklist
INTEGRATION

Integrating SPD1200S2 into your design

  • Supply: 3.3–5 V; ≈0.5 W average, 0.75 W maximum.
  • UART-TTL (customisable), 115200 bps default; 4–15 Hz adaptive.
  • Accuracy: ±0.3 m to 400 m, ±(0.5 m + 0.1% × d) to 1200 m.
  • Several source tables give slightly different dimensions; design to the drawing for your batch.
Applications
APPLICATIONS

Where SPD1200S2 is used

  • Near-to-far robotics. Ranging from 0.2 m to over a kilometre with one sensor.
  • Industrial positioning. Accurate mid-range distance.
  • Compact gimbals. Square, easy-to-mount body.
Questions & answers
FAQ

SPD1200S2 integration questions

How short can it measure?

0.2 m according to the catalogue range.

Is 1500 m achievable?

Only stated as a night-time maximum under special conditions; specify 1200 m.

S2 or Z2?

Z2 is thinner and faster; S2 is square and easier to bracket.

HARDWARE

SPD1200S2 mounting, wiring and commands

Taken from the SPD1200S2 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Mounting-hole dimensions for this model are supplied with the outline drawing and STEP model on request.

Request the SPD1200S2 STEP model for your bracket design.

Serial settings

Default baud rate
115200 bit/s
Checksum
Send frames: low 8 bits of the sum of bytes 3 to 7. Reply frames: low 8 bits of the sum of bytes 1 to 7.

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurement55 AA 88 FF FF FF FF 8455 AA 88 STA FF DIS_H DIS_L SUM[1:7]STA = 1: success. DIS_H/DIS_L = distance high/low byte; the reported value is 10 x the measured value.
Continuous measurement55 AA 89 FF FF FF FF 8555 AA 89 STA FF DIS_H DIS_L SUM[1:7]STA = 1: success. DIS_H/DIS_L = distance high/low byte; the reported value is 10 x the measured value.
Stop measurement55 AA 8E FF FF FF FF 8A55 AA 8E STA FF FF FF SUM[1:7]STA = 1: stopped; STA = 0: failed.

Frames follow the SPD1200S2 user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about SPD1200S2

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about SPD1200S2

SPD1200S2 quick answers

How much does the SPD1200S2 weigh?
≤10g.
What power does the SPD1200S2 need?
Supply: 3.3V~5V.
Which interface does the SPD1200S2 use?
UART-TTL, Customizable.
How much does one SPD1200S2 cost?
$150 for 1 piece, shipping included.
What is the minimum order for the SPD1200S2?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the SPD1200S2 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss SPD1200S2 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).