Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥500 μJ
Pulse width
6 ns
Wavelength
1535nm
Weight
12 g

The details

ER500 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

ER500 Specifications
ParameterSpecification & conditions
ModelER500
Laser Wavelength1535nm

Technical specifications

ER500 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

ER500 Specifications
ParameterSpecification & conditions
Pulse energy≥500 μJ
Laser Pulse width6 ns
Drive pulse width≤2.4 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 7 mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 75 °C
Dimension (mm)35 × 8 × 6.8 mm
Weight12 g
Voltage2 V
Electric current20 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

ER500 1535 nm Erbium-Glass Laser Source

ER500 is a laser rangefinder module for OEM integration. Confirm target conditions, configuration and the current datasheet before integration.

ER500 is a bare 1535 nm erbium-glass pulsed laser source for engineers who design their own rangefinder board and want ≥500 µJ per pulse in the same 35 × 8 × 6.8 mm package as the 400 µJ part.

WhatsApp about ER500
From $240 USD / unitLowest published unit price at 501+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$350 USDPublished unit price
11–30 pieces$330 USDSave 6%
31–50 pieces$320 USDSave 9%
51–200 pieces$310 USDSave 11%
201–500 pieces$280 USDSave 20%
501+ piecesLowest unit price$240 USDLowest published price · Save 31%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing ER500 against nearby models

ER500 shares its 35 × 8 × 6.8 mm, 12 g footprint with ER400, but matching package dimensions and mass do not establish board or pin compatibility. Confirm pin assignment, controlled drive requirements, optical configuration and mechanical drawings for both ordered versions before substitution. Move to ER500 when your link budget needs the extra pulse energy (≥500 µJ versus 400 µJ) and you can live with the 1–10 Hz repetition range.

If the optical bench is tight, ER300 (≥300 µJ) is 25 mm long and 8.5 g. If you need more energy, ER800 and ER900 step up to ≥800 µJ and ≥900 µJ but grow to 40 × 8 × 7.5 mm and 18 g. The millijoule parts (ER2000, ER4000) use a 60 × 25 × 13.5 mm body and a different drive.

Price follows the same ladder: ER500 is listed from $250 per unit, against $230 for ER400 and $1,050 for ER800.

Technical documentation & drawings
SPECIFICATIONS

ER500 datasheet values

Figures are reproduced from the ER500 datasheet. Read each value together with the test condition printed beside it.

Specifications

ER500 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥500 μJ and optical pulse width 6 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

ER500 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelER500
Laser Wavelength1535nm
Laser classificationClass 1
Pulse energy≥500 μJ
Laser Pulse width6 ns
Drive pulse width≤2.4 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 7 mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 75℃
Dimension (mm)35×8×6.8 mm
Weight12 g
Voltage2 V
Electric current20 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Reading this model's optical specifications

The recorded raw beam diameter is 0.3 mm and divergence is ≤ 7 mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

ER500 outline drawing retained from the original product record
ER500: original outline drawing. Verify the ordered variant and tolerances against its current mechanical drawing.
Integration checklist
INTEGRATION

Integrating ER500 into your design

  • Drive electronics: the component entry is 2 V at 20 A with a drive pulse of ≤2.4 ms. Your pump driver must deliver that current pulse cleanly; the module-level supply of a finished rangefinder is a separate design figure.
  • Thermal: the operating range is −40 °C to +65 °C. At 10 Hz the pump dissipation is not trivial in a sealed housing, so give the package a conductive path to the chassis.
  • Beam handling: raw beam diameter is 0.3 mm with ≤7 mrad divergence and TEM00 mode. Plan a beam expander or collimating optic to reach the divergence your receiver field of view needs.
  • Reliability inputs for your FMEA: shock 1500 G / 0.5 ms, vibration 20–2000 Hz at 20 G, rated life above one million shots. Pulse-to-pulse stability is listed at 10%.
Applications
APPLICATIONS

Where ER500 is used

  • Custom 1535 nm rangefinder boards. Teams that already own the receiver, timing and firmware and only need a qualified transmitter.
  • Lidar and atmospheric test benches. A 6 ns pulse at 1535 nm for time-of-flight experiments and receiver characterisation.
  • Upgrading an ER400 design. Raising pulse energy without changing the mechanical footprint of an existing layout.
Questions & answers
FAQ

ER500 integration questions

Is ER500 a complete rangefinder?

No. It is the laser source only. You still need the pump driver, receiver, timing electronics and optics. For a finished module, look at the 1535 nm C-line rangefinders.

Can I drop ER500 into a board designed for ER400?

The package dimensions and mass match (35 × 8 × 6.8 mm, 12 g). Check that your driver can supply the 20 A drive current and that your thermal design covers the higher pulse energy.

What laser class should my finished product carry?

The module document states Class 1, but classification belongs to the complete, evaluated configuration. Your finished instrument needs its own assessment.

Does the 940 nm pump explanation specify ER500's output or pump interface?

No. The reviewed ER500 brochure's model-specific table lists 1535 nm, while its heading uses 1.54 µm. The general principle section describes pump light as “typically around 940 nm”; that is not the model's stated laser output. Neither this generic explanation nor the accompanying schematic identifies the pump diode fitted to an ordered ER500, its bill of materials, electrical interface or approved drive conditions. Use the applicable current documentation for the supplied configuration to confirm those details before selecting a pump or driver.

HARDWARE

ER500 mounting, wiring and commands

Taken from the ER500 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two Φ2.4 mm mounting holes in the side lugs, 12 mm apart centre to centre. Recommended fastening torque 0.2 N·m. Screw size is not stated on the drawing.

Request the ER500 STEP model for your bracket design.

Engineering Q&A

Questions about ER500

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about ER500

ER500 quick answers

How much does the ER500 weigh?
12 g.
How much does one ER500 cost?
$350 for 1 piece, shipping included. Volume price from $240 at 501+ pieces.
What is the minimum order for the ER500?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the ER500 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss ER500 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).