Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

LRF0815C is a 1535 ± 5 nm laser rangefinder module from ERDI LASER. Published range: ≥8,000 m to a 2.3 m x 2.3 m target, 30% reflectance, visibility ≥10 km. Ranging accuracy: ±2 m. Interface: RS-422; TTL optional. From $900 per unit, shipping included (lowest published tier, 1001+ pieces; see the volume table below). Updated: 2026-11-06.

How LRF0815C differs from neighboring models

ItemLRF0815CLRF0405C
Range≥8,000 m to a 2.3 m x 2.3 m target, 30% reflectance, visibility ≥10 km4,000 m or more at 30% reflectance and visibility of at least 6 km
Accuracy±2 m+/-2 m
Beam divergence≤0.3 mrad0.6 mrad or less
InterfaceRS-422; TTL optionalUART, 3.3 V TTL level
Supply12 V DC—
Size65 x 46 x 86 mm48 x 30.5 x 21 mm
Published priceFrom $900 USD / unitFrom $400 USD / unit

Related models: LRF0405C.

LRF0815C frequently asked questions

What is the measurement range of the LRF0815C?
The published range is ≥8,000 m to a 2.3 m x 2.3 m target, 30% reflectance, visibility ≥10 km. Actual reach depends on target reflectivity, size and visibility.
What laser wavelength and interface does the LRF0815C use?
Wavelength: 1535 ± 5 nm. Interface: RS-422; TTL optional. Supply: 12 V DC.
How accurate is the LRF0815C?
Published ranging accuracy: ±2 m. Update rate: 0.5 to 10 Hz.
How much does the LRF0815C cost?
From $900 per unit, shipping included, at 1001+ pieces. Smaller quantities use the higher tiers in the volume table (single-piece tier: $1500).
What laser safety class is stated for the LRF0815C?
Class I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Published range
≥8,000 m to a 2.3 m x 2.3 m target, 30% reflectance, visibility ≥10 kmLong-range test condition
Interface
RS-422; TTL optional
Wavelength
1535 ± 5 nm
Weight
≤175 g

The details

LRF0815C specifications

Read every value with its conditions. View the model documents for integration.

1. LRF0815C module specifications

LRF0815C 1. LRF0815C module specifications
ParameterSpecification & conditions
ModelLRF0815C
Long-range test condition≥8,000 m to a 2.3 m x 2.3 m target, 30% reflectance, visibility ≥10 kmLong-range test condition
Minimum range≤15 m
Ranging accuracy±2 m
Reported range resolution≤0.1 m
Ranging frequency0.5 to 10 Hz
Multi-target reportingUp to 3 targets
Valid measurement rate / false-alarm rate≥98% / ≤1% under specified test conditions
Laser wavelength1535 ± 5 nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Pulse energy≥300 µJ
Beam divergence≤0.3 mrad
Transmitter lens diameterØ12 mm
Receiver lens diameterØ40 mm
Supply voltage12 V DC
Communication optionRS-422; TTL optional
TTL connectorMolex 51021-0500, 3.3 V RX/TX, CTRL, +12 V and GND
RS-422 connectorJ30J with RX+/RX-, TX+/TX- and power/ground contacts; mate and cable supplied per order configuration
Serial format115200 bps, 8 data bits, 1 stop bit, no parity (8N1)
Standby power≤1.2 W
Average power≤2 W
Peak power≤3 W at 10 Hz
Dimensions (L x W x H)65 × 46 × 86 mm
Weight≤175 g
Operating temperature−40 to +70 °C
Storage temperature−55 to +75 °C
Impact resistanceTested to the factory environmental shock test procedure (details on request)
Vibration resistanceTested to the factory environmental vibration test procedure (details on request)

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LRF0815C 1535 nm Laser Rangefinder Module

LRF0815C is a laser rangefinder module for OEM integration, with a published test range of 8 km and a RS-422 interface. Confirm target conditions, configuration and the current datasheet before integration.

LRF0815C is the mid-size 1535 nm rangefinder in our C line for teams building long-sight survey heads, infrastructure monitors or pan-tilt observation units that need multi-kilometre ranging from a 12 V bus without moving up to a 100 mm-class housing.

WhatsApp about LRF0815C
From $900 USD / unitLowest published unit price at 1001+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$1,500 USDPublished unit price
11–50 pieces$1,450 USDSave 3%
51–100 pieces$1,400 USDSave 7%
101–200 pieces$1,300 USDSave 13%
201–1000 pieces$1,200 USDSave 20%
1001+ piecesLowest unit price$900 USDLowest published price · Save 40%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF0815C against nearby models

Pick LRF0815C when you need the long-range test case (≥8,000 m on a 2.3 m × 2.3 m, 30% reflectance panel) but your bay cannot take the 107 × 62 × 72 mm body of LRF1017C or LRF1221C. Its 65 × 46 × 86 mm frame and ≤175 g mass sit between the two size classes.

If your enclosure is shallow, compare it with LRF0816C: same ≥300 µJ source class and 0.3 mrad divergence in a 65 × 48 × 32 mm, ≤58 g body, but with a 4.5–16 V input and a ≤50 m minimum distance instead of ≤15 m. For short-range work where 1–10 Hz and a smaller pulse are enough, LRF0610C (≥200 µJ, 70 × 32 × 40 mm) is the lighter option.

The deciding factors are usually near limit (≤15 m here), the 40 mm receive aperture you have to leave clear in the front panel, and whether your host already carries RS-422.

Technical documentation & drawings
SPECIFICATIONS

LRF0815C datasheet values

Figures are reproduced from the LRF0815C datasheet. Read each value together with the test condition printed beside it.

Specifications

LRF0815C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is ER300; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.

1. LRF0815C module specifications

LRF0815C — Basic Ranging Performance
Model LRF0815C
Long-range test condition ≥8,000 m to a 2.3 m x 2.3 m target, 30% reflectance, visibility ≥10 km
Minimum range ≤15 m
Ranging accuracy ±2 m
Reported range resolution ≤0.1 m
Ranging frequency 0.5 to 10 Hz
Multi-target reporting Up to 3 targets
Valid measurement rate / false-alarm rate ≥98% / ≤1% under specified test conditions
LRF0815C — Optical Parameters
Laser wavelength 1535 ± 5 nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Pulse energy ≥300 µJ
Beam divergence ≤0.3 mrad
Transmitter lens diameter Φ12 mm
Receiver lens diameter Φ40 mm
LRF0815C — Electrical and Communication Interface
Supply voltage 12 V DC
Communication option RS-422; TTL optional
TTL connector Molex 51021-0500, 3.3 V RX/TX, CTRL, +12 V and GND
RS-422 connector J30J with RX+/RX-, TX+/TX- and power/ground contacts; mate and cable supplied per order configuration
Serial format 115200 bps, 8 data bits, 1 stop bit, no parity (8N1)
Standby power ≤1.2 W
Average power ≤2 W
Peak power ≤3 W at 10 Hz
LRF0815C — Electrical and Communication Interface
Molex pin Signal Function
1 TTL RX 3.3 V serial input to the rangefinder
2 TTL TX 3.3 V serial output from the rangefinder
3 CTRL 3.3-5 V power on; 0 V power off
4 +12 V Positive supply input
5 GND Supply return
LRF0815C — Mechanical and Environmental
Dimensions (L x W x H) 65 x 46 x 86 mm
Weight ≤175 g
Operating temperature -40 to +70 °C
Storage temperature -55 to +75 °C
Impact resistance Tested to the factory environmental shock test procedure (details on request)
Vibration resistance Tested to the factory environmental vibration test procedure (details on request)

Model-specific mechanical and interface drawings

LRF0815C Mechanical and Environmental source drawing 1
LRF0815C: Mechanical and Environmental.

2. ER300 source-laser specifications

ER300 standalone laser component
ParameterValue
Optical wavelength1535 nm
Pulse energy≥300 µJ
Optical pulse width5 ns
Drive pulse width≤2.4 ms
Repetition rate1–10 Hz
Pulse stability10% (definition/statistical method not stated)
Raw beam diameter0.3 mm
Initial beam divergence≤7 mrad
Transverse modeTEM00
Operating / storage temperature−40 to +65 °C / −55 to +75 °C
Package dimensions / mass25 × 8 × 6.8 mm / 8.5 g
Component electrical entry2 V, 12 A
Shock / vibration entries1500 G, 0.5 ms / 20–2000 Hz, 20 G
Stated service life>1 million shots; test conditions not supplied

The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.

3. APD-A13B001 receiver-component specifications

Small screens: swipe the table horizontally to read all measurement conditions.

Supplied APD200 document — component values and conditions
ParameterValueMeasurement condition / scope
Device / active diameterAPD-A13B001 R01 / 200 µmSupplied APD200 document, p1
Detector spectral response interval800–1700 nmDetector response; not the filter passband
Responsivity0.9 A/W minimum; 1.0 A/W typicalλ = 1550 nm; incident power = 1 µW; M = 1
Dark current8 nA typical; 50 nA maximumVR = VBR − 3 V; incident power = 0
Multiplication factorM ≥10 / M ≥30λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V
−3 dB bandwidth0.6 GHz minimum; 1.25 GHz typicalM = 10; RL = 50 Ω
Breakdown voltage35–50 VReverse current = 10 µA; incident power = 0
Capacitance1.8 pF typical; 2.0 pF maximumVR = VBR − 3 V; f = 1 MHz
Breakdown temperature coefficient0.05 minimum / 0.11 typical / 0.15 maximum V/°CReverse current = 10 µA; dark; −55 to +85 °C
Operating / storage temperature−40 to +85 °C / −55 to +125 °CComponent absolute-maximum table; not module environmental ratings
Maximum biasVBRAbsolute maximum, not a recommended operating setpoint
Maximum forward / reverse current5 mA / 3 mAAbsolute maximum ratings, not continuous design targets
Filter centre wavelength1535 ±5 nmSupplied filter table, p3
Filter FWHM<37 nmFull width at half maximum
Transmission at centre wavelength>90%Filter specification, not total receiver throughput
Blocking specificationT <1%; source lists 400–1750 nmStop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength.
Optical surface quality60/40Source label: surface quality; not a transmission value

Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.

Integration checklist
INTEGRATION

Integrating LRF0815C into your design

  • Power: plan a regulated 12 V DC rail. The datasheet budgets ≤1.2 W standby, ≤2 W average and ≤3 W peak at 10 Hz, so size the regulator for the peak figure, not the average.
  • Interface: RS-422 is the default build (J30J connector carrying RX±, TX± and power); TTL is an order option on a Molex 51021-0500 5-pin header with 3.3 V RX/TX. State the variant on the purchase order because the cable and mate differ.
  • Power gating: pin 3 (CTRL) switches the module on with 3.3–5 V and off at 0 V, which lets the host hold the unit in a low-drain state between bursts.
  • Serial link: 115200 bps, 8N1. The module can report up to three echoes per shot; write your parser to accept a variable echo count rather than assuming a single distance field.
  • Optics: keep the Φ12 mm transmit and Φ40 mm receive apertures behind a window that is transparent at 1535 nm, and re-boresight after the window is fitted.
Applications
APPLICATIONS

Where LRF0815C is used

  • Long-baseline survey and inspection heads. Ranging to bridge piers, towers and dam faces where the operator cannot approach the structure.
  • Pan-tilt observation units. Adding distance to a thermal or visible camera on a fixed mast for perimeter, wildlife or forestry monitoring.
  • Maritime and coastal instruments. Distance to buoys, vessels or shoreline features where multi-echo output helps reject spray and near clutter.
Questions & answers
FAQ

LRF0815C integration questions

Can LRF0815C run from a 24 V vehicle supply?

Not directly. The input is specified at 12 V DC, so a 24 V platform needs a DC-DC stage with headroom for the ≤3 W peak draw at 10 Hz.

Which interface ships if I do not specify one?

RS-422 is listed as the standard communication option and TTL as optional. Confirm the connector (J30J for RS-422, Molex 51021-0500 for TTL) in your order so the matching cable is supplied.

Why does the multi-echo output matter for integration?

With up to three targets per measurement the frame length can change. Parse the echo count first, then read the distances, and decide in software whether you report the first, last or strongest return.

What should I confirm before freezing the mechanical design?

The model drawing for the 65 × 46 × 86 mm housing, the clear aperture in front of the Φ40 mm receiver and the environmental test method referenced in the datasheet for your order.

HARDWARE

LRF0815C mounting, wiring and commands

Taken from the LRF0815C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Three Φ3.3 mm and two Φ1.8 mm through holes on the mounting ears; two of the Φ3.3 mm holes are 26.5 mm apart. Through-hole diameters only; no thread is specified.

Request the LRF0815C STEP model for your bracket design.

Pin definition

PinSignalConnection
1TTL RX3.3 V
2TTL TX3.3 V
3CTRL3.3 to 5 V = on, 0 V = off
4+12 Vpower
5GND

Serial settings

Logic level
3.3 V TTL or RS-422, selectable by variant; pins listed are for the TTL version
Default baud rate
115200 bit/s
Frame format
8N1
Checksum
Command frames: XOR of every byte except the checksum byte.

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurement55 01 02 00 00 56—
Continuous measurement, 1 Hz55 02 02 03 E8 BE—Data = measurement period in ms (03 E8 = 1000 ms).
Stop / standby55 00 02 00 00 57—
Self-test55 03 02 00 00 54—
Read ID and versions55 EB 02 00 00 BC—

Frames follow the LRF0815C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF0815C

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about LRF0815C

LRF0815C quick answers

What are the LRF0815C dimensions?
65 × 46 × 86 mm.
How much does the LRF0815C weigh?
≤175 g.
What power does the LRF0815C need?
Supply: 12 V DC.
Which interface does the LRF0815C use?
RS-422; TTL optional.
How much does one LRF0815C cost?
$1,500 for 1 piece, shipping included. Volume price from $900 at 1,001+ pieces.
What is the minimum order for the LRF0815C?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF0815C lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF0815C for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).