Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Published range
Reference target(2.3m × 2.3m) ≥8,000m Measuring human target(0.5m × 1.7m) ≥1,500mReflectance 30%; visibility ≥10 km
Wavelength
1535±5nm
Weight
≤ 58±1g
Supply
DC 4.5~16 V

The details

LRF0816C specifications

Read every value with its conditions. View the model documents for integration.

Additional specifications

LRF0816C Additional specifications
ParameterSpecification & conditions
ProjectPerformance I ndicators
ModelLRF0816C
Laser Wavelength1535±5nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Divergence Angle≤0.3 mrad
Laser Energy≥300 μJ
Launch Lens DiameterØ12 mm
Receiver Lens DiameterØ25 mm
Measuring Range (Reflectance 30%; visibility ≥10 km.)Reference target(2.3m × 2.3m) ≥8,000m Measuring human target(0.5m × 1.7m) ≥1,500mReflectance 30%; visibility ≥10 km
Minimum Range≤50 m
Ranging Frequency1Hz ~10Hz
Number of multi-target detectionsUp to 3 targets
Ranging Accuracy±2 m
Range Resolution≤0.1 m
Precision Rate≥98%
False Alarm Rate≤1%
Pin-in-lead package modelA1257WR-S-6P
Supply VoltageDC 4.5~16 V
Standby power consumption≤1 mW
Average power consumption≤4 W
Peak Power Consumption≤14W @12 V
Weight≤ 58±1g
Dimension (L×W×H)65mm × 48mm × 32 mm
Operating Temperature−40~+70 °C
Storage Temperature−55~+75 °C
Impact ResistanceTested to the factory environmental shock test procedure (details on request)
Vibration ResistanceTested to the factory environmental vibration test procedure (details on request)
PinDefinitionDescription
1Positive power supplyPower supply, 4.5 ~ 16V
2Negative power supplyPower supply, ground
3POWER_ONModule power switch, TTL_ 3.3V level; Module on (> 2.7V), module off (< 0.3V);
4UART_TXSerial port sender, TTL_ 3.3V level
5UART_RXSerial port receiver, TTL_ 3.3V level

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LRF0816C 1535 nm Laser Rangefinder Module

LRF0816C is a laser rangefinder module for OEM integration, with a published test range of 8 km. Confirm target conditions, configuration and the current datasheet before integration.

LRF0816C is the ≥300 µJ version of the 65 × 48 × 32 mm, ≤58 g 1535 nm module, listing ≥8000 m on a reference target from a 4.5–16 V input.

WhatsApp about LRF0816C
From $1,200 USD / unitLowest published unit price at 201+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$1,500 USDPublished unit price
11–50 pieces$1,450 USDSave 3%
51–100 pieces$1,400 USDSave 7%
101–200 pieces$1,300 USDSave 13%
201+ piecesLowest unit price$1,200 USDLowest published price · Save 20%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF0816C against nearby models

Reference figures: ≥8000 m on 2.3 × 2.3 m and ≥1500 m on 0.5 × 1.7 m at 30% reflectance and ≥10 km visibility.

It shares housing, connector and supply with LRF0612C. For the same reference range with ≤15 m minimum distance and RS-422, look at LRF0815C, which is larger (65 × 46 × 86 mm).

Published unit prices start at $1,200 at 201+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LRF0816C datasheet values

Figures are reproduced from the LRF0816C datasheet. Read each value together with the test condition printed beside it.

Specifications

LRF0816C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is ER300; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.

1. LRF0816C module specifications

LRF0816C — TECHNICAL SPECIFICATIONS
Project Performance Indicators
Model LRF0816C
Laser Wavelength 1535±5nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Divergence Angle ≤0.3 mrad
Laser Energy ≥300 μJ
Launch Lens Diameter Φ12 mm
Receiver Lens Diameter Φ25 mm
Measuring Range

(Reflectance 30%; visibility ≥10 km.)

Reference target(2.3m×2.3m) ≥8000m

Measuring human target(0.5m×1.7m) ≥1500m

Minimum Range ≤50 m
Ranging Frequency  1Hz ~10Hz
Number of multi-target detections Up to 3 targets
Ranging Accuracy ±2 m
Range Resolution ≤0.1 m
Precision Rate ≥98%
False Alarm Rate ≤1%
Pin-in-lead package model A1257WR-S-6P
Supply Voltage DC 4.5~16 V
Standby power consumption ≤1 mW
Average power consumption ≤4 W (measurement-rate condition not specified)
Peak Power Consumption ≤14W @12 V
Weight ≤ 58±1g
Dimension (L×W×H) 65mm×48mm×32 mm
Operating Temperature -40~+70 ℃
Storage Temperature -55~+75 ℃
Impact Resistance Tested to the factory environmental shock test procedure (details on request)
Vibration Resistance Tested to the factory environmental vibration test procedure (details on request)
LRF0816C — PIN interface
Pin Definition Description Cable color
1 Positive power supply Power supply, 4.5 ~ 16V Red
2 Negative power supply Power supply, ground Black
3 POWER_ON Module power switch, TTL_ 3.3V level;

Module on (> 2.7V), module off (< 0.3V);

White
4 UART_TX Serial port sender, TTL_ 3.3V level Yellow
5 UART_RX Serial port receiver, TTL_ 3.3V level Green

Model-specific mechanical and interface drawings

LRF0816C OUTLINE DIMENSION(mm) source drawing 1
LRF0816C: OUTLINE DIMENSION(mm).
LRF0816C PIN interface source drawing 2
LRF0816C: PIN interface.

2. ER300 source-laser specifications

ER300 standalone laser component
ParameterValue
Optical wavelength1535 nm
Pulse energy≥300 µJ
Optical pulse width5 ns
Drive pulse width≤2.4 ms
Repetition rate1–10 Hz
Pulse stability10% (definition/statistical method not stated)
Raw beam diameter0.3 mm
Initial beam divergence≤7 mrad
Transverse modeTEM00
Operating / storage temperature−40 to +65 °C / −55 to +75 °C
Package dimensions / mass25 × 8 × 6.8 mm / 8.5 g
Component electrical entry2 V, 12 A
Shock / vibration entries1500 G, 0.5 ms / 20–2000 Hz, 20 G
Stated service life>1 million shots; test conditions not supplied

The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.

3. APD-A13B001 receiver-component specifications

Small screens: swipe the table horizontally to read all measurement conditions.

Supplied APD200 document — component values and conditions
ParameterValueMeasurement condition / scope
Device / active diameterAPD-A13B001 R01 / 200 µmSupplied APD200 document, p1
Detector spectral response interval800–1700 nmDetector response; not the filter passband
Responsivity0.9 A/W minimum; 1.0 A/W typicalλ = 1550 nm; incident power = 1 µW; M = 1
Dark current8 nA typical; 50 nA maximumVR = VBR − 3 V; incident power = 0
Multiplication factorM ≥10 / M ≥30λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V
−3 dB bandwidth0.6 GHz minimum; 1.25 GHz typicalM = 10; RL = 50 Ω
Breakdown voltage35–50 VReverse current = 10 µA; incident power = 0
Capacitance1.8 pF typical; 2.0 pF maximumVR = VBR − 3 V; f = 1 MHz
Breakdown temperature coefficient0.05 minimum / 0.11 typical / 0.15 maximum V/°CReverse current = 10 µA; dark; −55 to +85 °C
Operating / storage temperature−40 to +85 °C / −55 to +125 °CComponent absolute-maximum table; not module environmental ratings
Maximum biasVBRAbsolute maximum, not a recommended operating setpoint
Maximum forward / reverse current5 mA / 3 mAAbsolute maximum ratings, not continuous design targets
Filter centre wavelength1535 ±5 nmSupplied filter table, p3
Filter FWHM<37 nmFull width at half maximum
Transmission at centre wavelength>90%Filter specification, not total receiver throughput
Blocking specificationT <1%; source lists 400–1750 nmStop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength.
Optical surface quality60/40Source label: surface quality; not a transmission value

Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.

Integration checklist
INTEGRATION

Integrating LRF0816C into your design

  • Supply: DC 4.5–16 V; peak ≤14 W at 12 V, average ≤4 W, standby ≤1 mW.
  • Connector: A1257WR-S-6P.
  • Minimum range: ≤50 m.
  • Optics: Φ12 mm / Φ25 mm, ≤0.3 mrad.
Applications
APPLICATIONS

Where LRF0816C is used

  • Long-range observation in a slim package. Masts, towers and vehicle roofs.
  • Wide-area survey. Kilometre-scale ranging for terrain and structures.
  • Upgrade from LRF0612C. More reach without changing the mechanical interface.
Questions & answers
FAQ

LRF0816C integration questions

Can I swap LRF0612C for LRF0816C?

Both list the same dimensions, connector and supply range. Check the drawing and power budget for your batch.

What visibility is the 8000 m figure based on?

≥10 km visibility and 30% reflectance.

Does it support multi-echo output?

Yes, up to three targets per measurement.

HARDWARE

LRF0816C mounting, wiring and commands

Taken from the LRF0816C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Four M3 mounting holes, 6 mm deep, on the lens face on a 26 x 26 mm pattern.

Request the LRF0816C STEP model for your bracket design.

Serial settings

Logic level
3.3 V TTL
Default baud rate
115200 bit/s
Frame format
8N1
Checksum
Low 8 bits of the sum of the device code, command code and parameter bytes (header and length byte excluded).

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurementEE 16 02 03 02 05—Reply: EE 16 06 03 02 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Continuous measurementEE 16 02 03 04 07—Reply (repeated): EE 16 06 03 04 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Stop measurementEE 16 02 03 05 08EE 16 02 03 05 08Reply echoes the command.
Self-testEE 16 02 03 01 04—Reply: EE 16 06 03 01 S3 S2 S1 S0 CS (status bytes).
Set continuous rate to 1 HzEE 16 04 03 A1 01 00 A5EE 16 02 03 A1 A4Rate byte 0x01 to 0x0A; 0x05 = 5 Hz.
Read serial numberEE 16 02 03 A9 AC—Reply: EE 16 05 03 A9 MONYEAR NUM_H NUM_L CS.

Frames follow the LRF0816C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF0816C

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about LRF0816C

LRF0816C quick answers

How much does the LRF0816C weigh?
≤ 58±1g.
What power does the LRF0816C need?
Supply: DC 4.5~16 V.
How much does one LRF0816C cost?
$1,500 for 1 piece, shipping included. Volume price from $1,200 at 201+ pieces.
What is the minimum order for the LRF0816C?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF0816C lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF0816C for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).