Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥300 μJ
Pulse width
5 ns
Wavelength
1535nm
Weight
8.5 g

The details

ER300 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

ER300 Specifications
ParameterSpecification & conditions
ModelER300
Laser Wavelength1535nm

Technical specifications

ER300 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

ER300 Specifications
ParameterSpecification & conditions
Pulse energy≥300 μJ
Laser Pulse width5 ns
Drive pulse width≤2.4 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 7 mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 75 °C
Dimension (mm)25 × 8 × 6.8 mm
Weight8.5 g
Voltage2 V
Electric current12 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

ER300 1535 nm Erbium-Glass Laser Source

ER300 is a laser rangefinder module for OEM integration. Confirm target conditions, configuration and the current datasheet before integration.

ER300 is a ≥300 µJ, 1535 nm erbium-glass source in a 25 × 8 × 6.8 mm, 8.5 g body, the transmitter behind most of our long-range C-line rangefinders.

WhatsApp about ER300
From $100 USD / unitLowest published unit price at 1000+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$160 USDPublished unit price
11–30 pieces$150 USDSave 6%
31–200 pieces$140 USDSave 13%
201–500 pieces$130 USDSave 19%
501–999 pieces$120 USDSave 25%
1000+ piecesLowest unit price$100 USDLowest published price · Save 38%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing ER300 against nearby models

ER300 sits between ER200 (200 µJ, 21 mm long) and ER400 / ER500 (400–500 µJ, 35 mm long). It is the usual choice when you need multi-kilometre performance but cannot give up 10 mm of board length.

Finished modules that reference ER300 include LRF0815C, LRF0816C, LRF0818C, LRF1017C and LRF1221C. Evaluating one of them is a fast way to see what the source can do with a matched receiver.

Published unit prices start at $100 at 1000+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

ER300 datasheet values

Figures are reproduced from the ER300 datasheet. Read each value together with the test condition printed beside it.

Specifications

ER300 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥300 μJ and optical pulse width 5 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

ER300 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelER300
Laser Wavelength1535nm
Laser classificationClass 1
Pulse energy≥300 μJ
Laser Pulse width5 ns
Drive pulse width≤2.4 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 7 mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 75℃
Dimension (mm)25×8×6.8 mm
Weight8.5 g
Voltage2 V
Electric current12 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Reading this model's optical specifications

The recorded raw beam diameter is 0.3 mm and divergence is ≤ 7 mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

ER300 outline drawing retained from the original product record
ER300: original outline drawing. Verify the ordered variant and tolerances against its current mechanical drawing.
Integration checklist
INTEGRATION

Integrating ER300 into your design

  • Drive: The PDF specification table lists 2 V, 12 A and a drive pulse width of ≤2.4 ms; optical pulse width is 5 ns. Page 2 separately describes a typical load below 2 V, a pulse below 2 ms and 10 Hz. Confirm operating settings and driver compatibility against the supplied unit’s factory test report.
  • Beam: 0.3 mm raw diameter, ≤7 mrad initial divergence, TEM00 mode. A beam expander brings divergence down to the sub-milliradian figures of the finished modules.
  • Ruggedness data for your FMEA: 1500 G / 0.5 ms shock, 20–2000 Hz at 20 G vibration, more than one million shots of rated life.
  • Temperature: −40 °C to +65 °C operating, −55 °C to +75 °C storage.
Applications
APPLICATIONS

Where ER300 is used

  • Long-range 1535 nm rangefinder modules. The source used across our 8 km-class designs.
  • Custom observation and survey instruments. Integrators building their own receiver around a proven transmitter.
  • Receiver development. A stable 5 ns pulse for APD and timing-circuit characterisation.
Questions & answers
FAQ

ER300 integration questions

Why do several rangefinders list ER300 but perform differently?

Range depends on receiver aperture, detector, divergence after collimation and firmware. The source is one part of the link budget.

What drive current does ER300 need?

The PDF specification table lists 2 V and 12 A with a drive pulse width of ≤2.4 ms. Its page 2 operating instructions separately describe a typical load below 2 V, 12 A, a pulse below 2 ms and 10 Hz. These statements have different contexts. Use the factory test report for the supplied unit to confirm operating settings and driver compatibility; do not treat the table limits as a complete driver configuration.

Is ER300 the same length as ER200?

No. ER300 is 25 mm long, ER200 is 21 mm. Width and height are the same (8 × 6.8 mm).

HARDWARE

ER300 mounting, wiring and commands

Taken from the ER300 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two mounting lugs, 12 mm apart centre to centre. Hole diameter and screw size are not printed on the drawing.

Request the ER300 STEP model for your bracket design.

Engineering Q&A

Questions about ER300

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about ER300

ER300 quick answers

How much does the ER300 weigh?
8.5 g.
How much does one ER300 cost?
$160 for 1 piece, shipping included. Volume price from $100 at 1,000+ pieces.
What is the minimum order for the ER300?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the ER300 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss ER300 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).