Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥100 μJ
Pulse width
6 ns
Wavelength
1.54 μm
Weight
7 g

The details

ER100 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

ER100 Specifications
ParameterSpecification & conditions
ModelER100
Laser Wavelength1.54 μm

Technical specifications

ER100 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

ER100 Specifications
ParameterSpecification & conditions
Pulse energy≥100 μJ
Laser Pulse width6 ns
Drive pulse width≤2.4 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 8 mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 75 °C
Dimension (mm)21 × 8 × 6.8 mm
Weight7 g
Voltage2 V
Electric current8 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Service life≥1million shots

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

ER100 1.54 µm Erbium-Glass Laser Source

ER100 1.54 µm Erbium-Glass Laser Source. Compare pulse energy, pulse width, repetition rate, drive requirements and model documents.

ER100 is the entry 1535 nm erbium-glass pulsed source (≥100 µJ, 21 × 8 × 6.8 mm, 7 g) for compact rangefinder designs where cost per unit matters more than maximum reach.

WhatsApp about ER100
From $70 USD / unitLowest published unit price at 1001+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–10 piecesBase tier$120 USDPublished unit price
11–30 pieces$115 USDSave 4%
31–500 pieces$100 USDSave 17%
501–1000 pieces$80 USDSave 33%
1001+ piecesLowest unit price$70 USDLowest published price · Save 42%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing ER100 against nearby models

ER100 and ER200 share the 21 × 8 × 6.8 mm, 7 g package. ER200 raises pulse energy to 200 µJ at a fixed 10 Hz; ER100 keeps an adjustable 1–10 Hz rate and ≤8 mrad divergence. The list price gap is small ($70 against $80), so the choice is usually driven by link budget.

For the smallest possible emitter, MINI-100 offers the same energy class in 2.5 g. For more margin on dark targets, ER300 adds ≥300 µJ in a 25 mm-long body.

ER100 is the referenced source of the LRF0310C rangefinder module.

Technical documentation & drawings
SPECIFICATIONS

ER100 datasheet values

Figures are reproduced from the ER100 datasheet. Read each value together with the test condition printed beside it.

Specifications

ER100 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥100 μJ and optical pulse width 6 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

ER100 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelER100
Laser Wavelength1.54 μm
Laser classificationClass 1
Pulse energy≥100 μJ
Laser Pulse width6 ns
Drive pulse width≤2.4 ms
Pulse repetition rate1~10Hz
Pulse stability10%
Raw Beam Diameter0.3 mm
Beam divergence angle≤ 8 mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 75℃
Dimension (mm)21×8×6.8 mm
Weight7 g
Voltage2 V
Electric current8 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Service life≥1million shots

Source-version clarification

Lifetime: the current PDF table states ≥1 million shots, while its introduction states ≥10 million. The table value is displayed; the ordered lifetime rating needs confirmation. No 10-million-shot rating is asserted here.

Reading this model's optical specifications

The recorded raw beam diameter is 0.3 mm and divergence is ≤ 8 mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

ER100 outline drawing retained from the original product record
ER100: original outline drawing. Verify the ordered variant and tolerances against its current mechanical drawing.
Integration checklist
INTEGRATION

Integrating ER100 into your design

  • Drive: 2 V component entry. Size the pump driver from the drive current and pulse-width figures in the current datasheet.
  • Beam: ≤8 mrad raw divergence; the transmit lens sets the final value. Keep transmit and receive axes parallel during assembly.
  • Environment: −40 °C to +65 °C operating range. Provide a conductive thermal path at higher repetition rates.
  • Timing: 1–10 Hz. Use the laser fire signal as your time-of-flight start reference rather than the driver command edge.
Applications
APPLICATIONS

Where ER100 is used

  • Cost-sensitive 1535 nm modules. Short to medium range distance sensors for consumer and light industrial tools.
  • Teaching and lab setups. Time-of-flight experiments where a robust, low-cost pulsed source is enough.
  • Second-source evaluation. Benchmarking an existing 100 µJ-class design.
Questions & answers
FAQ

ER100 integration questions

Should I choose ER100 or ER200?

Same footprint and weight. ER200 gives 200 µJ at 10 Hz; ER100 gives ≥100 µJ with a 1–10 Hz range. Choose ER200 when the target is dark or small, ER100 when cost and variable rate matter.

Is ER100 sold as a complete rangefinder?

No, it is the transmitter only. LRF0310C is a finished module built around it.

What does the 1–10 Hz rating mean for my design?

It is the supported pulse repetition range. Your update rate can be lower, which reduces average power and heat.

HARDWARE

ER100 mounting, wiring and commands

Taken from the ER100 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two Φ2.4 mm mounting holes in the side lugs, 12 mm apart centre to centre. Screw size is not stated on the drawing.

Request the ER100 STEP model for your bracket design.

Engineering Q&A

Questions about ER100

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about ER100

ER100 quick answers

How much does the ER100 weigh?
7 g.
How much does one ER100 cost?
$120 for 1 piece, shipping included. Volume price from $70 at 1,001+ pieces.
What is the minimum order for the ER100?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the ER100 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss ER100 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).