Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

LRF3000A1 is a 905 ± 10 nm laser rangefinder module from ERDI LASER. Published range: ≥3000 m. Ranging accuracy: ±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m). Interface: UART, 3.3 V TTL. From $80 per unit, shipping included (lowest published tier, 501+ pieces; see the volume table below). Updated: 2026-11-06.

How LRF3000A1 differs from neighboring models

ItemLRF3000A1LR2000E2
Range≥3000 m4–2000 m
Accuracy±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m)±1 m (D ≤ 400 m); 0.4% of D (400 m < D ≤ 2000 m)
Beam divergence≤10 mrad< 6 mrad
InterfaceUART, 3.3 V TTLUART-TTL
Supply3.3–5 V DC3.3–5 V
SizeSee model-specific mechanical drawing25.65 × 13.05 × 24.6 mm
Published priceFrom $80 USD / unitFrom $50 USD / unit

Related models: LR2000E2.

LRF3000A1 frequently asked questions

What is the measurement range of the LRF3000A1?
The published range is ≥3000 m. Actual reach depends on target reflectivity, size and visibility.
What laser wavelength and interface does the LRF3000A1 use?
Wavelength: 905 ± 10 nm. Interface: UART, 3.3 V TTL. Supply: 3.3–5 V DC.
How accurate is the LRF3000A1?
Published ranging accuracy: ±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m). Update rate: Normal: 3–10 Hz; long-range: 1–10 Hz.
How much does the LRF3000A1 cost?
From $80 per unit, shipping included, at 501+ pieces. Smaller quantities use the higher tiers in the volume table (single-piece tier: $200).
What laser safety class is stated for the LRF3000A1?
Class 1 (IEC 60825-1)
Published range
≥3,000 m70%-reflectivity building target; clear weather; visibility ≥4 km.
Interface
UART, 3.3 V TTL
Wavelength
905 ± 10 nm
Weight
12 ± 0.5 g

The details

LRF3000A1 specifications

Read every value with its conditions. View the model documents for integration.

LRF3000A1 Specifications

LRF3000A1 LRF3000A1 Specifications
ParameterSpecification & conditions
Laser wavelength905 ± 10 nm
Maximum measurement distance≥3,000 m70%-reflectivity building target; clear weather; visibility ≥4 km.
Minimum measurement distance1 m90%-reflectivity whiteboard.
Ranging accuracy±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m)Building target; D is distance in meters.
Measurement update rateNormal: 3–10 Hz; long-range: 1–10 HzAdaptive in both modes.
Communication interfaceUART, 3.3 V TTL
Baud rate115200 bps default; 9600 bps
Supply voltage3.3–5 V DCRipple <0.1 V.
Standby power consumption≤350 mWPower-on input pulled low.
Low-power consumption≤1 mWPower-on input pulled high.
Operating power consumption≤1.8 W at +25 °C; ≤1.6 W at −20 °C+3.3 V input. These entries do not extend the operating-temperature range.
Typical beam divergence≤10 mrad
Receiver field of view≈8 mrad
Weight12 ± 0.5 g
Operating temperature−20 °C to +60 °C
Storage temperature−25 °C to +75 °C
Laser safety classClass 1 (IEC 60825-1)As stated in the model manual; finished-equipment assessment is separate.
Ingress protectionIP67Module rating stated in the model manual; the host enclosure requires its own assessment.

Technical specifications

LRF3000A1 Technical specifications
ParameterSpecification & conditions
Valid measurement rate≥98%
False alarm rate≤1%
Response timeStart-up ≤160 ms + first ranging 100 ms (short range) to 517 ms (long range)System start-up plus first ranging; current model manual, p.2.
Average laser power7.63 mWCurrent model manual, p.3.
Vibration5–50–5 Hz, 1 octave/min, 2.5 gCurrent model manual, p.3.
ReliabilityMTBF ≥1500 h
DimensionsSee model-specific mechanical drawingCurrent manual Section 5, p.5. Use its mounting geometry and tolerances.

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Mechanical fit

See model-specific mechanical drawing (Current manual Section 5, p.5. Use its mounting geometry and tolerances.)

Discuss integration

Product overview

LRF3000A1 905 nm Laser Rangefinder Module

LRF3000A1 is a laser rangefinder module for OEM integration, with a published test range of 3 km and a UART interface. Confirm target conditions, configuration and the current datasheet before integration.

LRF3000A1 is a 905 ± 10 nm laser rangefinder module with normal and long-range modes. Its stated maximum range is ≥3000 m on a 70%-reflectivity building target in clear weather with visibility ≥4 km. Under the manual's building-target test conditions, accuracy is ±0.7 m for D ≤ 100 m and ±(0.7 + 0.003D) m for D > 100 m, where D is distance in meters. These performance conditions include a perpendicular target surface and no direct sunlight.

WhatsApp about LRF3000A1
From $80 USD / unitLowest published unit price at 501+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–30 piecesBase tier$200 USDPublished unit price
31–200 pieces$180 USDSave 10%
201–500 pieces$120 USDSave 40%
501+ piecesLowest unit price$80 USDLowest published price · Save 60%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF3000A1 against nearby models

Compared with LR2000E2, LRF3000A1 lists a wider ≤10 mrad beam and two modes: normal 3–10 Hz and long-range 1–10 Hz. The ≤350 mW entry is standby consumption with the Enable pin low. Compare operating-power figures under matched conditions.

For a narrower beam at 1500–2000 m, stay with LR1500E2 or LR2000E4.

Published unit prices start at $80 at 501+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LRF3000A1 datasheet values

Figures are reproduced from the LRF3000A1 datasheet. Read each value together with the test condition printed beside it.

ParameterValueConditions / notes
Laser wavelength905 ± 10 nm—
Maximum measurement distance≥3000 m70%-reflectivity building target; clear weather; visibility ≥4 km.
Minimum measurement distance1 m90%-reflectivity whiteboard.
Ranging accuracy±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m)Building target; D is distance in meters.
Measurement update rateNormal: 3–10 Hz; long-range: 1–10 HzAdaptive in both modes.
Communication interfaceUART, 3.3 V TTL—
Baud rate115200 bps default; 9600 bps—
Supply voltage3.3–5 V DCRipple <0.1 V.
Standby power consumption≤350 mWPower-on input pulled low.
Low-power consumption≤1 mWPower-on input pulled high.
Operating power consumption≤1.8 W at +25 °C; ≤1.6 W at −20 °C+3.3 V input. These entries do not extend the operating-temperature range.
Typical beam divergence≤10 mrad—
Receiver field of view≈8 mrad—
Weight12 ± 0.5 g—
Operating temperature−20 °C to +60 °C—
Storage temperature−25 °C to +75 °C—
Laser safety classClass 1 (IEC 60825-1)As stated in the model manual; finished-equipment assessment is separate.
Ingress protectionIP67Module rating stated in the model manual; the host enclosure requires its own assessment.
Valid measurement rate≥98%Per the LRF3000A1 user manual.
False alarm rate≤1%Per the LRF3000A1 user manual.
Response timeStart-up ≤160 ms + first ranging 100 ms (short range) to 517 ms (long range)System start-up plus first ranging; current model manual, p.2.
Average laser power7.63 mWCurrent model manual, p.3.
Vibration5–50–5 Hz, 1 octave/min, 2.5 gCurrent model manual, p.3.
ReliabilityMTBF ≥1500 hReliability figure from the model manual; not a service-life guarantee.
DimensionsSee model-specific mechanical drawingCurrent manual Section 5, p.5. Use its mounting geometry and tolerances.
  • Use the model-specific mechanical drawing for the mounting geometry and tolerances. Overall installation clearance is evaluated separately from individual housing dimensions.

Operation and Data Output

Select normal or long-range measurement mode through the model’s communication protocol. The mode determines the documented adaptive output-rate range.

In low-power mode the controller is off and does not respond to ordinary commands. Use the model-specific enable input and wake-up sequence before requesting or processing a ranging result.

Electrical Interface

PinSignalFunction
1GNDPower ground
2Power Supply3.3–5 V DC power input
3NCReserved pin (NC)
4TTL_TXDTransmit data: module → host; 3.3 V TTL
5TTL_RXDReceive data: host → module; 3.3 V TTL
6Enable PinActive low: normal operation. High level: low-power mode.

Mechanical Dimensions

Use the drawing and its tolerances for installation. This drawing is reproduced directly from the current LRF3000A1 user manual.

LRF3000A1 mechanical drawing, current user manual page 5
LRF3000A1 Mechanical DrawingManual page 5. Open the PDF to inspect the original dimensions and tolerances.
Integration checklist
INTEGRATION

Integrating LRF3000A1 into your design

  • Supply: 3.3–5 V DC with ripple below 0.1 V; ≤350 mW with the power-on input pulled low.
  • UART at 3.3 V TTL; 115200 bps default, 9600 bps available.
  • The manual notes that send and receive verification content may differ; check checksums on a sample unit.
  • Mechanics: use the model drawing (Section 5 of the current manual). Operating temperature −20 °C to +60 °C.
Applications
APPLICATIONS

Where LRF3000A1 is used

  • Long-range handhelds. Extra reach with a long-range mode.
  • Fixed monitoring. Low-power distance from a 3.3–5 V supply.
  • UAV payloads. 12 g module.
Questions & answers
FAQ

LRF3000A1 integration questions

What accuracy beyond 100 m?

±(0.7 + 0.003D) m on a building target.

What is the long-range mode?

A 1–10 Hz adaptive mode for distant targets, alongside the 3–10 Hz normal mode.

How clean must the supply be?

Ripple below 0.1 V.

HARDWARE

LRF3000A1 mounting, wiring and commands

Taken from the LRF3000A1 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Two M1.6 threaded mounting holes, 4 mm deep, on the front face; the drawing also marks two Ø1.6 mm through holes and internal-wall mounting points.

Request the LRF3000A1 STEP model for your bracket design.

Pin definition

PinSignalConnection
1GNDground
2Power supply3.3-5 V DC
3NCreserved
4TTL_TXDserial TX, 3.3 V TTL
5TTL_RXDserial RX, 3.3 V TTL
6Enablepower on at low level

Serial settings

Logic level
3.3 V TTL
Default baud rate
115200 bit/s
Checksum
Send frames: low 8 bits of the sum of bytes 3 to 7. Reply frames: low 8 bits of the sum of bytes 1 to 7.

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurement55 AA 88 FF FF FF FF 8455 AA 88 STA FF DIS_H DIS_L SUM[1:7]STA = 1: success. DIS_H/DIS_L = distance high/low byte; the reported value is 10 x the measured value.
Stop measurement55 AA 8E FF FF FF FF 8A55 AA 8E STA FF FF FF SUM[1:7]STA = 1: stopped; STA = 0: failed.

Frames follow the LRF3000A1 user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF3000A1

Answered by ERDI engineers in the community.

Ask an engineer about LRF3000A1

LRF3000A1 quick answers

What are the LRF3000A1 dimensions?
See model-specific mechanical drawing.
How much does the LRF3000A1 weigh?
12 ± 0.5 g.
What power does the LRF3000A1 need?
Supply: 3.3–5 V DC.
Which interface does the LRF3000A1 use?
UART, 3.3 V TTL.
How much does one LRF3000A1 cost?
$200 for 1 piece, shipping included. Volume price from $80 at 501+ pieces.
What is the minimum order for the LRF3000A1?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF3000A1 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF3000A1 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).