Interface
TTL
Discuss integration
Rangefinders
The ERDI LRF0818C is a 1535 nm laser rangefinder module with 8 km published range, 65 g weight, TTL interface, from $2,000 per piece with free worldwide shipping. Specs verified:
1535 nm Laser Rangefinder Module.
Built into your next design.
1 pc $2,0001,001+ pcs from $900Published unit prices, shipping included · Quantity options
MOQ 1 pc · Free worldwide shipping · Reply within 24 h
Standard warranty: one year
Lead time stated on your PI before payment
Shipped by DHL to customers in the US, India and Ukraine
Published price · shipping included worldwide · pay by card or PayPal, or by bank transfer. Volume price applies automatically.
Added to cart. Go to checkout →
Card or PayPal · Bank transfer · Free worldwide shipping
| Quantity | Unit price | Subtotal at first quantity |
|---|---|---|
| 1–30 | $2,000 | $2,000 |
| 31–200 | $1,800 | $55,800 |
| 201–1000 | $1,400 | $281,400 |
| 1001+ | $900 | $900,900 |
The details
Read every value with its conditions. View the model documents for integration.
| Parameter | Specification & conditions |
|---|---|
| Operating wavelength | 1535 nm ± 10 nm |
| Laser safety class | Class IStated in the LRF0818C datasheet product description; finished-equipment assessment is separate. |
| Transmitting aperture | Ø12 mm |
| Receiving aperture | Ø26 mm |
| Maximum range Under visibility ≥ 12 km and relative humidity ≤ 60%, tested against a 0.3-reflectivity panel (or equivalent target) | Vehicle (2.3 m × 4.6 m): ≥ 8,000 m Human (0.5 m × 1.7 m): ≥ 4,500 m (design guarantee) Small object (0.2 m × 0.3 m): ≥ 2,600 m (design guarantee) |
| Minimum range | ≤ 20 m |
| Range accuracy | ≤ ±2 m |
| Ranging rate | Single shot, 1 Hz, 2 Hz, 3 Hz, 4 Hz, 5 Hz, 10 Hz |
| Beam divergence | ≤ 0.4 mrad |
| Operating temperature | −40 °C to +60 °C |
| Storage temperature | −50 °C to +70 °C (to be qualified at the system level) |
| Vibration | 5→50→5 Hz sweep, 1 octave/min, 2.5 g (system-level qualification) |
| Shock | 1200 g, 1 ms (system-level qualification) |
| Overall dimensions | ≤ 59.5 mm × 26 mm × 32 mm |
| W eig ht | ≤ 65 g |
| Communication interface | TTL |
| Supply voltage | 4.5 V–16 V |
| Power consumption | Standby ≤ 1 mW; Operating ≤ 4 W; Peak ≤ 14 W @ 12 V |
| Valid-return rate | ≥98% |
| Documented functions | Single/continuous ranging; first/last return selection; range gate; built-in self-test; status and temperature reporting; shot counter; serial firmware update. These names do not disclose the implemented detection algorithm. |
| Pin # | Pin No.Remarks |
| P-1 | VIN+Power input, 4.5–16 V |
| P-2 | VIN-Power ground (GND) |
| P-3 | POWER_ONModule power enable (TTL, 3.3 V logic level); Module ON (> 2.7 V), module OFF (< 0.3 V) |
| P-4 | UART_TXUART TXD (serial transmit), TTL, 3.3 V logic level |
| P-5 | UART_RXUART RXD (serial receive), TTL, 3.3 V logic level |
| P-6 | GNDSerial ground (SGND) |
Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.
TTL
Discuss integration4.5 V–16 V
Discuss integrationLRF0818C 1535 nm Laser Rangefinder Module
LRF0818C is a laser rangefinder module for OEM integration, with a published test range of 8 km and a TTL interface. Confirm target conditions, configuration and the current datasheet before integration.
LRF0818C is a narrow ≤59.5 × 26 × 32 mm, ≤65 g 1535 nm rangefinder with the ER300 source, listing ≥8000 m to a vehicle-size target and first/last-return selection.
WhatsApp about LRF0818CPublished unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.
Integration library
Drawings, test conditions and application notes. Open the part you need.
Test cases (≥12 km visibility, ≤60% humidity, 0.3 reflectivity): vehicle 2.3 × 4.6 m ≥8000 m, person-size 0.5 × 1.7 m ≥4500 m. Accuracy ≤±2 m; minimum range ≤20 m.
It shares functions (range gate, first/last return, self-test) and pinout with LRF0609C but uses a narrower 0.4 mrad beam and a higher-energy source.
For a lower-height body, compare LRF0816C (65 × 48 × 32 mm). Published unit prices start at $900 at 1001+ pieces; see Volume Pricing for all quantity bands.
Figures are reproduced from the LRF0818C datasheet. Read each value together with the test condition printed beside it.
LRF0818C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is ER300; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.
|
Parameter |
Specification |
|
Operating wavelength |
1535 nm ± 10 nm |
| Laser-safety description | The source describes the module as 1535 nm eye-safe but does not state a numerical laser class in the reviewed specification. Wavelength alone is not a classification. |
|---|---|
|
Transmitting aperture |
Φ12 mm |
|
Receiving aperture |
Φ26 mm |
|
Maximum range Under visibility ≥ 12 km and relative humidity ≤ 60%, tested against a 0.3-reflectivity panel (or equivalent target) |
Vehicle (2.3 m × 4.6 m): ≥ 8000 m Human (0.5 m × 1.7 m): ≥ 4500 m (design guarantee) Small object (0.2 m × 0.3 m): ≥ 2600 m (design guarantee) |
|
Minimum range |
≤ 20 m |
|
Range accuracy |
≤ ±2 m |
|
Ranging rate |
Single shot, 1 Hz, 2 Hz, 3 Hz, 4 Hz, 5 Hz, 10 Hz |
|
Beam divergence |
≤ 0.4 mrad |
|
Operating temperature |
−40 °C to +60 °C |
|
Storage temperature |
−50 °C to +70 °C (to be qualified at the system level) |
|
Vibration |
5→50→5 Hz sweep, 1 octave/min, 2.5 g (system-level qualification) |
|
Shock |
1200 g, 1 ms (system-level qualification) |
|
Overall dimensions |
≤ 59.5 mm × 26 mm × 32 mm |
|
Weight |
≤ 65 g |
|
Communication interface |
TTL |
|
Supply voltage |
4.5 V–16 V |
|
Power consumption |
Standby ≤ 1 mW; Operating ≤ 4 W; Peak ≤ 14 W @ 12 V |
| Parameter | Value |
|---|---|
| Valid-return rate | ≥98% |
| Documented functions | Single/continuous ranging; first/last return selection; range gate; built-in self-test; status and temperature reporting; shot counter; serial firmware update. These names do not disclose the implemented detection algorithm. |
|
Pin # |
Pin No. |
Remarks |
|
P-1 |
VIN+ |
Power input, 4.5–16 V |
|
P-2 |
VIN- |
Power ground (GND) |
|
P-3 |
POWER_ON |
Module power enable (TTL, 3.3 V logic level); |
|
P-4 |
UART_TX |
UART TXD (serial transmit), TTL, 3.3 V logic level |
|
P-5 |
UART_RX |
UART RXD (serial receive), TTL, 3.3 V logic level |
|
P-6 |
GND |
Serial ground (SGND) |


| Parameter | Value |
|---|---|
| Optical wavelength | 1535 nm |
| Pulse energy | ≥300 µJ |
| Optical pulse width | 5 ns |
| Drive pulse width | ≤2.4 ms |
| Repetition rate | 1–10 Hz |
| Pulse stability | 10% (definition/statistical method not stated) |
| Raw beam diameter | 0.3 mm |
| Initial beam divergence | ≤7 mrad |
| Transverse mode | TEM00 |
| Operating / storage temperature | −40 to +65 °C / −55 to +75 °C |
| Package dimensions / mass | 25 × 8 × 6.8 mm / 8.5 g |
| Component electrical entry | 2 V, 12 A |
| Shock / vibration entries | 1500 G, 0.5 ms / 20–2000 Hz, 20 G |
| Stated service life | >1 million shots; test conditions not supplied |
The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.
Small screens: swipe the table horizontally to read all measurement conditions.
| Parameter | Value | Measurement condition / scope |
|---|---|---|
| Device / active diameter | APD-A13B001 R01 / 200 µm | Supplied APD200 document, p1 |
| Detector spectral response interval | 800–1700 nm | Detector response; not the filter passband |
| Responsivity | 0.9 A/W minimum; 1.0 A/W typical | λ = 1550 nm; incident power = 1 µW; M = 1 |
| Dark current | 8 nA typical; 50 nA maximum | VR = VBR − 3 V; incident power = 0 |
| Multiplication factor | M ≥10 / M ≥30 | λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V |
| −3 dB bandwidth | 0.6 GHz minimum; 1.25 GHz typical | M = 10; RL = 50 Ω |
| Breakdown voltage | 35–50 V | Reverse current = 10 µA; incident power = 0 |
| Capacitance | 1.8 pF typical; 2.0 pF maximum | VR = VBR − 3 V; f = 1 MHz |
| Breakdown temperature coefficient | 0.05 minimum / 0.11 typical / 0.15 maximum V/°C | Reverse current = 10 µA; dark; −55 to +85 °C |
| Operating / storage temperature | −40 to +85 °C / −55 to +125 °C | Component absolute-maximum table; not module environmental ratings |
| Maximum bias | VBR | Absolute maximum, not a recommended operating setpoint |
| Maximum forward / reverse current | 5 mA / 3 mA | Absolute maximum ratings, not continuous design targets |
| Filter centre wavelength | 1535 ±5 nm | Supplied filter table, p3 |
| Filter FWHM | <37 nm | Full width at half maximum |
| Transmission at centre wavelength | >90% | Filter specification, not total receiver throughput |
| Blocking specification | T <1%; source lists 400–1750 nm | Stop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength. |
| Optical surface quality | 60/40 | Source label: surface quality; not a transmission value |
Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.
A 0.5 × 1.7 m object under the stated visibility and reflectance; it is described as a design guarantee.
They let you choose the nearest or farthest echo when the beam hits several surfaces.
ER300.
Taken from the LRF0818C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.
Four M3 holes on the lens face on a 26 x 26 mm pattern, plus three M3 holes on the side face; thread depth 5 mm.
Request the LRF0818C STEP model for your bracket design.
| Pin | Signal | Connection |
|---|---|---|
| 1 | VIN+ | 4.5-16 V |
| 2 | VIN- | power ground |
| 3 | POWER_ON | 3.3 V TTL: above 2.7 V = on, below 0.3 V = off |
| 4 | UART_TX | module TX |
| 5 | UART_RX | module RX |
| 6 | GND | serial ground |
| Command | Send (hex) | Reply (hex) | Notes |
|---|---|---|---|
| Single measurement | EE 16 02 03 02 05 | — | Reply: EE 16 06 03 02 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range. |
| Continuous measurement | EE 16 02 03 04 07 | — | Reply (repeated): EE 16 06 03 04 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range. |
| Stop measurement | EE 16 02 03 05 08 | EE 16 02 03 05 08 | Reply echoes the command. |
| Self-test | EE 16 02 03 01 04 | — | Reply: EE 16 06 03 01 S3 S2 S1 S0 CS (status bytes). |
| Read minimum gate distance | EE 16 02 03 A3 A6 | — | Reply: EE 16 04 03 A3 DIS_H DIS_L CS. |
Frames follow the LRF0818C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.
Engineering Q&A
Wiring, protocol or integration question? Ask in the ERDI engineering community.
Use the integration path that matches your host:
Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.
Inspect the model in your browser, or ask for the STEP file for your design review.
Request 3D STEP model — reply within 24 hTechnical inquiry
Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.