Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Published range
a) Under line-of-sight conditions, with visibility not less than 15 km and humidity not greater than 80% (at 30 °C), the ranging distance for Target 1 (5 m × 15 m) is ≥ 6,500 m. b) Under line-of-sight conditions, with visibility not less than 15 km and humidity not greater than 80% (at 30 °C), the ranging distance for a target with diffuse reflectance not less than 30% (20 m × 20 m) is ≥ 12,000 m.
Interface
RS422
Wavelength
1535 ±5 nm
Weight
≤410g

The details

LRF1831C specifications

Read every value with its conditions. View the model documents for integration.

Additional specifications

LRF1831C Additional specifications
ParameterSpecification & conditions
ProjectPerformance I ndicators
ModelLRF1831C
Laser Wavelength1535 ±5 nm
Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.
Divergence Angle≤1.3 mrad
Laser Energy≥350 μJ
Main Functions of the Laser Rangefinder:a) Single-shot and continuous ranging; b) Three-target ranging with near/far target indication; c) Self-test function (including current APD temperature, high-voltage value, internal voltage, and blind-zone value); d) Standby wake-up function.
Receiver Lens DiameterØ60 mm
Measuring Rangea) Under line-of-sight conditions, with visibility not less than 15 km and humidity not greater than 80% (at 30 °C), the ranging distance for Target 1 (5 m × 15 m) is ≥ 6,500 m. b) Under line-of-sight conditions, with visibility not less than 15 km and humidity not greater than 80% (at 30 °C), the ranging distance for a target with diffuse reflectance not less than 30% (20 m × 20 m) is ≥ 12,000 m.
Minimum Range≤50 m
Ranging Frequency0.5Hz ~10Hz
Communication interfaceRS422
Ranging Accuracy±2 m
Range Resolution≤0.1 m
Precision Rate≥98%
False Alarm Rate≤1%
Pin-in-lead package modelJ30J
Supply VoltageDC12 V
Standby power consumption≤1.2W
Average power consumption≤2 W
Peak Power Consumption≤3W
Weight≤410g
Dimension (L×W×H)113 × 76 × 90mm
Operating Temperature−40~+70 °C
Storage Temperature−55~+75 °C
Impact ResistanceTested to the factory environmental shock test procedure (details on request)
Vibration ResistanceTested to the factory environmental vibration test procedure (details on request)
External plug-in XS3Model :Molex51021-0500Remark
1TTL RX3.3V
2TTL TX3.3V
3CTRL3.3V-5V power on, 0V power off
4+12VPower supply+
5GNDPower supply-
PinD efinitionFunction
1GNDSerial Port Ground
2GND12V Input Negative
3GND12V Input Negative
4VCC 5V12V Input Positive
5VCC 5V12V Input Positive
6RS422 RX+Serial Port Receive +
7RS422 RX-Serial Port Receive -
8RS422 TX-Serial Port Transmit -
9RS422 TX+Serial Port Transmit +

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LRF1831C 1535 nm Laser Rangefinder Module

LRF1831C is a laser rangefinder module for UAV payloads, with a published test range of 6.5 km and a RS-422 interface. Confirm target conditions, configuration and the current datasheet before integration.

LRF1831C is a 113 × 76 × 90 mm, ≤410 g 1535 nm rangefinder with a Φ60 mm receiver and a wider ≤1.3 mrad beam, built for three-target ranging with near/far indication.

WhatsApp about LRF1831C
From $3,500 USD / unitLowest published unit price at 501+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–30 piecesBase tier$7,000 USDPublished unit price
31–200 pieces$5,500 USDSave 21%
201–500 pieces$4,500 USDSave 36%
501+ piecesLowest unit price$3,500 USDLowest published price · Save 50%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF1831C against nearby models

Unlike LRF1830C (≤0.3 mrad), LRF1831C spreads the beam to ≤1.3 mrad with a ≥350 µJ source. A wider beam makes small or moving objects easier to hit, at the cost of peak reach.

Functions include single-shot and continuous ranging and three-target output with near/far indication.

Published unit prices start at $3,500 at 501+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LRF1831C datasheet values

Figures are reproduced from the LRF1831C datasheet. Read each value together with the test condition printed beside it.

Specifications

LRF1831C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is ER300; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.

1. LRF1831C module specifications

LRF1831C — TECHNICAL SPECIFICATIONS

Project

Performance Indicators

Model

LRF1831C

Laser Wavelength

1535 ±5 nm

Module laser-safety statementClass I stated in the module document. Final accessible-emission classification applies to the complete configuration.

Divergence Angle

≤1.3 mrad

Laser Energy

≥350 μJ

Main Functions of the Laser Rangefinder:

a) Single-shot and continuous ranging;
b) Three-target ranging with near/far target indication;
c) Self-test function (including current APD temperature, high-voltage value, internal voltage, and blind-zone value);
d) Standby wake-up function.

Receiver Lens Diameter

Φ60 mm

Measuring Range

a) Under line-of-sight conditions, with visibility not less than 15 km and humidity not greater than 80% (at 30 °C), the ranging distance for Target 1 (5 m × 15 m) is ≥ 6,500 m.

b) Under line-of-sight conditions, with visibility not less than 15 km and humidity not greater than 80% (at 30 °C), the ranging distance for a target with diffuse reflectance not less than 30% (20 m × 20 m) is ≥ 12,000 m.

Minimum Range

≤50 m

Ranging Frequency

0.5Hz ~10Hz

Communication interface

RS422

Ranging Accuracy

±2 m

Range Resolution

≤0.1 m

Precision Rate

≥98%

False Alarm Rate

≤1%

Pin-in-lead package model 

J30J  

Supply Voltage

DC12 V

Standby power consumption

≤1.2W

Average power consumption

≤2 W

Peak Power Consumption

≤3W

Weight

≤410g

Dimension (L×W×H)

113×76×90mm

Operating Temperature

-40~+70 ℃

Storage Temperature

-55~+75 ℃

Impact Resistance

Tested to the factory environmental shock test procedure (details on request)

Vibration Resistance

Tested to the factory environmental vibration test procedure (details on request)

LRF1831C — PIN INTERFACE

External plug-in XS3

Model:Molex51021-0500

Remark

1

TTL RX

3.3V

2

TTL TX

3.3V

3

CTRL

3.3V-5V power on, 0V power off

4

+12V

Power supply+

5

GND

Power supply-

LRF1831C — PIN INTERFACE

Pin

Definition

Function

Remarks

1

GND

Serial Port Ground

 

2

GND

12V Input Negative

 

3

GND

12V Input Negative

 

4

VCC 5V

12V Input Positive

 

5

VCC 5V

12V Input Positive

 

6

RS422 RX+

Serial Port Receive +

From the upper computer to the rangefinder

7

RS422 RX-

Serial Port Receive -

From the upper computer to the rangefinder

8

RS422 TX-

Serial Port Transmit -

From the rangefinder to the upper computer

9

RS422 TX+

Serial Port Transmit +

From the rangefinder to the upper computer

Model-specific mechanical and interface drawings

LRF1831C OUTLINE DIMENSION(mm) source drawing 1
LRF1831C: OUTLINE DIMENSION(mm).

2. ER300 source-laser specifications

ER300 standalone laser component
ParameterValue
Optical wavelength1535 nm
Pulse energy≥300 µJ
Optical pulse width5 ns
Drive pulse width≤2.4 ms
Repetition rate1–10 Hz
Pulse stability10% (definition/statistical method not stated)
Raw beam diameter0.3 mm
Initial beam divergence≤7 mrad
Transverse modeTEM00
Operating / storage temperature−40 to +65 °C / −55 to +75 °C
Package dimensions / mass25 × 8 × 6.8 mm / 8.5 g
Component electrical entry2 V, 12 A
Shock / vibration entries1500 G, 0.5 ms / 20–2000 Hz, 20 G
Stated service life>1 million shots; test conditions not supplied

The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.

3. APD-A13B001 receiver-component specifications

Small screens: swipe the table horizontally to read all measurement conditions.

Supplied APD200 document — component values and conditions
ParameterValueMeasurement condition / scope
Device / active diameterAPD-A13B001 R01 / 200 µmSupplied APD200 document, p1
Detector spectral response interval800–1700 nmDetector response; not the filter passband
Responsivity0.9 A/W minimum; 1.0 A/W typicalλ = 1550 nm; incident power = 1 µW; M = 1
Dark current8 nA typical; 50 nA maximumVR = VBR − 3 V; incident power = 0
Multiplication factorM ≥10 / M ≥30λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V
−3 dB bandwidth0.6 GHz minimum; 1.25 GHz typicalM = 10; RL = 50 Ω
Breakdown voltage35–50 VReverse current = 10 µA; incident power = 0
Capacitance1.8 pF typical; 2.0 pF maximumVR = VBR − 3 V; f = 1 MHz
Breakdown temperature coefficient0.05 minimum / 0.11 typical / 0.15 maximum V/°CReverse current = 10 µA; dark; −55 to +85 °C
Operating / storage temperature−40 to +85 °C / −55 to +125 °CComponent absolute-maximum table; not module environmental ratings
Maximum biasVBRAbsolute maximum, not a recommended operating setpoint
Maximum forward / reverse current5 mA / 3 mAAbsolute maximum ratings, not continuous design targets
Filter centre wavelength1535 ±5 nmSupplied filter table, p3
Filter FWHM<37 nmFull width at half maximum
Transmission at centre wavelength>90%Filter specification, not total receiver throughput
Blocking specificationT <1%; source lists 400–1750 nmStop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength.
Optical surface quality60/40Source label: surface quality; not a transmission value

Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.

Integration checklist
INTEGRATION

Integrating LRF1831C into your design

  • Supply: DC 12 V; standby ≤1.2 W, average ≤2 W, peak ≤3 W.
  • RS-422 on J30J; external XS3 Molex 51021-0500.
  • Rates: 0.5–10 Hz; accuracy ±2 m; minimum ≤50 m.
  • Visibility for the range specification is not less than 15 km; read the full test case on the datasheet.
Applications
APPLICATIONS

Where LRF1831C is used

  • Moving-object ranging. Easier hits on small objects thanks to the wider beam.
  • Cluttered scenes. Three-target output separates foreground from background.
  • Observation platforms and EO gimbals. Large-aperture receiver for long-distance work.
Questions & answers
FAQ

LRF1831C integration questions

Why choose a wider beam?

It tolerates pointing error on small or moving objects. If you range large, static surfaces, a narrow-beam model reaches further.

How many echoes are reported?

Up to three, with near/far target indication.

What does it weigh?

≤410 g.

HARDWARE

LRF1831C mounting, wiring and commands

Taken from the LRF1831C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Mounting-hole dimensions for this model are supplied with the outline drawing and STEP model on request.

Request the LRF1831C STEP model for your bracket design.

Pin definition

PinSignalConnection
1TTL RX3.3 V
2TTL TX3.3 V
3CTRL3.3 to 5 V = on, 0 V = off
4+12 Vpower
5GND

Serial settings

Logic level
3.3 V TTL or RS-422, selectable by variant; pins listed are for the TTL version
Default baud rate
115200 bit/s
Frame format
8N1
Checksum
Command frames: XOR of every byte except the checksum byte.

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurement55 01 02 00 00 56—
Continuous measurement, 1 Hz55 02 02 03 E8 BE—Data = measurement period in ms (03 E8 = 1000 ms).
Stop / standby55 00 02 00 00 57—
Self-test55 03 02 00 00 54—
Read ID and versions55 EB 02 00 00 BC—

Frames follow the LRF1831C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF1831C

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about LRF1831C

LRF1831C quick answers

How much does the LRF1831C weigh?
≤410g.
What power does the LRF1831C need?
Supply: DC12 V.
Which interface does the LRF1831C use?
RS422.
How much does one LRF1831C cost?
$7,000 for 1 piece, shipping included. Volume price from $3,500 at 501+ pieces.
What is the minimum order for the LRF1831C?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF1831C lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF1831C for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).