Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Published range
Under visibility ≥ 12 km and relative humidity ≤ 60%, tested against a 0.3-reflectivity panel (or equivalent target): Vehicle (2.3 m × 4.6 m): ≥ 6,000 m;
Interface
TTL
Wavelength
1535 nm ± 10 nm
Weight
≤ 62 g

The details

LRF0609C specifications

Read every value with its conditions. View the model documents for integration.

Additional specifications

LRF0609C Additional specifications
ParameterSpecification & conditions
Operating wavelength1535 nm ± 10 nm
Laser-safety descriptionThe source describes the module as 1535 nm eye-safe but does not state a numerical laser class in the reviewed specification. Wavelength alone is not a classification.
Transmitting apertureØ12 mm
Receiving apertureØ26 mm
Maximum rangeUnder visibility ≥ 12 km and relative humidity ≤ 60%, tested against a 0.3-reflectivity panel (or equivalent target): Vehicle (2.3 m × 4.6 m): ≥ 6,000 m;
Minimum range≤ 20 m
Range accuracy≤ ±2 m
Ranging rateSingle shot, 1 Hz, 2 Hz, 3 Hz, 4 Hz, 5 Hz, 10 Hz
Beam divergence≤ 0.5 mrad
Operating temperature−40 °C to +60 °C
Storage temperature−50 °C to +70 °C (to be qualified at the system level)
Vibration5→50→5 Hz sweep, 1 octave/min, 2.5 g (system-level qualification)
Shock1200 g, 1 ms (system-level qualification)
Overall dimensions≤55 × 48 × 32 mm
W eig ht≤ 62 g
Communication interfaceTTL
Supply voltage4.5 V–16 V
Power consumption≤ 1.5 W (avg), ≤ 0.3 W (standby)
Valid-return rate≥98%
Source “range resolution” entry≤38 m; definition not supplied. Do not equate this undefined entry with display increment or absolute accuracy.
Documented functionsSingle/continuous ranging; first/last return selection; range gate; built-in self-test; status and temperature reporting; shot counter; serial firmware update. These names do not disclose the implemented detection algorithm.
Pin #Pin No.Remarks
P-1VIN+Power input, 4.5–16 V
P-2VIN-Power ground (GND)
P-3POWER_ONModule power enable (TTL, 3.3 V logic level); Module ON (> 2.7 V), module OFF (< 0.3 V)
P-4UART_TXUART TXD (serial transmit), TTL, 3.3 V logic level
P-5UART_RXUART RXD (serial receive), TTL, 3.3 V logic level
P-6GNDSerial ground (SGND)

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LRF0609C 1535 nm Laser Rangefinder Module

LRF0609C is a laser rangefinder module for OEM integration, with a published test range of 6 km and a TTL interface. Confirm target conditions, configuration and the current datasheet before integration.

LRF0609C is a ≤55 × 48 × 32 mm, ≤62 g 1535 nm rangefinder with a 4.5–16 V input and on-board range gating, for integrators who need first/last-return control in a compact housing.

WhatsApp about LRF0609C
From $800 USD / unitLowest published unit price at 1001+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–30 piecesBase tier$1,600 USDPublished unit price
31–300 pieces$1,300 USDSave 19%
301–1000 pieces$1,000 USDSave 38%
1001+ piecesLowest unit price$800 USDLowest published price · Save 50%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LRF0609C against nearby models

Documented functions include single and continuous ranging, first/last return selection, a range gate and built-in self-test, which LRF0610C does not list in the same way.

Optics are Φ12 mm transmit and Φ26 mm receive with ≤0.5 mrad divergence; minimum range is ≤20 m and accuracy ≤±2 m. LRF0818C uses the same aperture sizes with a 300 µJ-class source.

Published unit prices start at $800 at 1001+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LRF0609C datasheet values

Figures are reproduced from the LRF0609C datasheet. Read each value together with the test condition printed beside it.

Specifications

LRF0609C is a 1535 nm pulsed distance-measurement module. Its assigned laser source is ER200; receiver-component data below come from the supplied APD-A13B001 R01 document. The three specification levels describe different assemblies and measurement conditions.

1. LRF0609C module specifications

LRF0609C — Technical Summary

Parameter

Specification

Operating wavelength

 1535 nm ± 10 nm

Laser-safety descriptionThe source describes the module as 1535 nm eye-safe but does not state a numerical laser class in the reviewed specification. Wavelength alone is not a classification.

Transmitting aperture

Φ12 mm

Receiving aperture

Φ26 mm

 Maximum range

Under visibility ≥ 12 km and relative humidity ≤ 60%, tested against a 0.3-reflectivity panel (or equivalent target):
 Vehicle (2.3 m × 4.6 m): ≥ 6000 m;

Minimum range

≤ 20 m

Range accuracy

≤ ±2 m

Ranging rate

Single shot, 1 Hz, 2 Hz, 3 Hz, 4 Hz, 5 Hz, 10 Hz

Beam divergence

≤ 0.5 mrad

Operating temperature

−40 °C to +60 °C

Storage temperature

−50 °C to +70 °C (to be qualified at the system level)

Vibration

5→50→5 Hz sweep, 1 octave/min, 2.5 g (system-level qualification)

Shock

1200 g, 1 ms (system-level qualification)

Overall dimensions≤55 × 48 × 32 mm

Weight

≤ 62 g

Communication interface

TTL

Supply voltage

4.5 V–16 V

Power consumption

 ≤ 1.5 W (avg), ≤ 0.3 W (standby)

LRF0609C — additional source entries, PDF page 1
ParameterValue
Valid-return rate≥98%
Source “range resolution” entry≤38 m; definition not supplied. Do not equate this undefined entry with display increment or absolute accuracy.
Documented functionsSingle/continuous ranging; first/last return selection; range gate; built-in self-test; status and temperature reporting; shot counter; serial firmware update. These names do not disclose the implemented detection algorithm.
LRF0609C — Electrical Interface

Pin #

Pin No.

Remarks

P-1

VIN+

Power input, 4.5–16 V

P-2

VIN-

Power ground (GND)

P-3

POWER_ON

Module power enable (TTL, 3.3 V logic level);
Module ON (> 2.7 V), module OFF (< 0.3 V)

P-4

UART_TX

UART TXD (serial transmit), TTL, 3.3 V logic level

P-5

UART_RX

UART RXD (serial receive), TTL, 3.3 V logic level

P-6

GND

Serial ground (SGND)

Model-specific mechanical and interface drawings

LRF0609C Structural dimensions source drawing 1
LRF0609C: Structural dimensions.
LRF0609C Electrical Interface source drawing 2
LRF0609C: Electrical Interface.

2. ER200 source-laser specifications

ER200 standalone laser component
ParameterValue
Optical wavelength1535 nm
Pulse energy200 µJ (source value; no minimum/maximum qualifier)
Optical pulse width5 ns (FWHM)
Drive pulse width<2.4 ms
Repetition rate10 Hz (source operating point, not a stated range)
Pulse-energy stability10% (definition/statistical method not stated)
Raw beam diameter0.3 mm
Initial beam divergence8 mrad (source value; no ≤ qualifier)
Transverse modeTEM00
Operating / storage temperature−40 to +65 °C / −55 to +85 °C
Package dimensions / mass21 × 8 × 6.8 mm / 7 g
Component electrical entry2 V, 10 A
Shock / vibration entries1500 G, 0.5 ms / 20–2000 Hz, 20 G
Stated service life>1 million shots; test conditions not supplied

The electrical entries describe the component drive, not the module supply input. Drive conditions and pulse-width definitions must follow the component document and the individual factory record. An optical pulse-width value is not a pump-drive duration.

3. APD-A13B001 receiver-component specifications

Small screens: swipe the table horizontally to read all measurement conditions.

Supplied APD200 document — component values and conditions
ParameterValueMeasurement condition / scope
Device / active diameterAPD-A13B001 R01 / 200 µmSupplied APD200 document, p1
Detector spectral response interval800–1700 nmDetector response; not the filter passband
Responsivity0.9 A/W minimum; 1.0 A/W typicalλ = 1550 nm; incident power = 1 µW; M = 1
Dark current8 nA typical; 50 nA maximumVR = VBR − 3 V; incident power = 0
Multiplication factorM ≥10 / M ≥30λ = 1550 nm; 1 µW; respectively VBR − 3 V / VBR − 1 V
−3 dB bandwidth0.6 GHz minimum; 1.25 GHz typicalM = 10; RL = 50 Ω
Breakdown voltage35–50 VReverse current = 10 µA; incident power = 0
Capacitance1.8 pF typical; 2.0 pF maximumVR = VBR − 3 V; f = 1 MHz
Breakdown temperature coefficient0.05 minimum / 0.11 typical / 0.15 maximum V/°CReverse current = 10 µA; dark; −55 to +85 °C
Operating / storage temperature−40 to +85 °C / −55 to +125 °CComponent absolute-maximum table; not module environmental ratings
Maximum biasVBRAbsolute maximum, not a recommended operating setpoint
Maximum forward / reverse current5 mA / 3 mAAbsolute maximum ratings, not continuous design targets
Filter centre wavelength1535 ±5 nmSupplied filter table, p3
Filter FWHM<37 nmFull width at half maximum
Transmission at centre wavelength>90%Filter specification, not total receiver throughput
Blocking specificationT <1%; source lists 400–1750 nmStop-band/transition edges are not numerically defined; the stated blocking span is not a guarantee at every wavelength.
Optical surface quality60/40Source label: surface quality; not a transmission value

Responsivity is measured at 1550 nm; a value measured there is not silently relabeled as a measured 1535 nm value. Absolute maxima are stress limits. The filter document includes an illustrative spectrum, but does not define numerical transition edges or off-axis performance. No additional spectral guarantee is inferred.

Integration checklist
INTEGRATION

Integrating LRF0609C into your design

  • Supply: 4.5–16 V; ≤1.5 W average and ≤0.3 W standby.
  • Pins: P-1 VIN+, P-2 VIN−, P-3 POWER_ON, P-4 UART_TX, P-5 UART_RX, P-6 GND. Interface is TTL.
  • Rates: single shot, 1, 2, 3, 4, 5 or 10 Hz.
  • The datasheet gives an eye-safe 1535 nm description without a numerical laser class; your finished product needs its own classification. The undefined '≤38 m resolution' entry is not a display increment; ask us before quoting it.
Applications
APPLICATIONS

Where LRF0609C is used

  • Range-gated observation. Ignoring foreground clutter such as fences or vegetation.
  • Vehicle and mast cameras. Wide-input supply for 12 V platforms.
  • Self-tested instruments. Products that report a health status to the host.
Questions & answers
FAQ

LRF0609C integration questions

What is the range gate for?

It limits which returns are accepted, so near or far clutter is not reported as the target.

Does LRF0609C have a laser class?

The source describes it as eye-safe at 1535 nm but does not state a class number. Classify the finished product.

Which operating temperature is specified?

−40 °C to +60 °C.

HARDWARE

LRF0609C mounting, wiring and commands

Taken from the LRF0609C outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Four M3 holes, 5 mm deep, on the lens face on a 26 x 26 mm pattern, plus three M3 holes, 5 mm deep, on the side face.

Request the LRF0609C STEP model for your bracket design.

Pin definition

PinSignalConnection
1VIN+4.5-16 V
2VIN-power ground
3POWER_ON3.3 V TTL: above 2.7 V = on, below 0.3 V = off
4UART_TXmodule TX
5UART_RXmodule RX
6GNDserial ground

Serial settings

Logic level
3.3 V TTL
Default baud rate
115200 bit/s
Frame format
8N1
Checksum
Low 8 bits of the sum of the device code, command code and parameter bytes (header and length byte excluded).

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurementEE 16 02 03 02 05—Reply: EE 16 06 03 02 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Continuous measurementEE 16 02 03 04 07—Reply (repeated): EE 16 06 03 04 STATUS INT_H INT_L DEC CS. Distance (m) = INT_H x 256 + INT_L + DEC x 0.1. STATUS 0x04 = out of range.
Stop measurementEE 16 02 03 05 08EE 16 02 03 05 08Reply echoes the command.
Self-testEE 16 02 03 01 04—Reply: EE 16 06 03 01 S3 S2 S1 S0 CS (status bytes).
Read minimum gate distanceEE 16 02 03 A3 A6—Reply: EE 16 04 03 A3 DIS_H DIS_L CS.

Frames follow the LRF0609C user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LRF0609C

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about LRF0609C

LRF0609C quick answers

How much does the LRF0609C weigh?
≤ 62 g.
What power does the LRF0609C need?
Supply: 4.5 V–16 V.
Which interface does the LRF0609C use?
TTL.
How much does one LRF0609C cost?
$1,600 for 1 piece, shipping included. Volume price from $800 at 1,001+ pieces.
What is the minimum order for the LRF0609C?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LRF0609C lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Status

Status
Available to order

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LRF0609C for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).