Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

Pulse energy
≥2 mJ
Pulse width
12 ns
Wavelength
1535nm
Weight
105 g

The details

ER2000 specifications

Read every value with its conditions. View the model documents for integration.

Specifications

ER2000 Specifications
ParameterSpecification & conditions
ModelER2000
Laser Wavelength1535nm

Technical specifications

ER2000 Technical specifications
ParameterSpecification & conditions
Laser classificationClass 1

Specifications

ER2000 Specifications
ParameterSpecification & conditions
Pulse energy≥2 mJ
Laser Pulse width12 ns
Drive pulse width≤ 4 ms
Pulse repetition rate1~10 Hz
Pulse stability10%
Raw Beam Diameter0.5 mm
Beam divergence angle≤ 4mrad
Beam ModeTEM00
Operating temperature−40 °C ~ +65 °C
Storage temperature−55 °C ~+ 75 °C
Dimension (mm)60 × 25 × 13.5 mm
Weight105 g
Voltage≤ 5 V
Electric current80 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

ER2000 1535 nm Erbium-Glass Laser Source

ER2000 is a laser rangefinder module for industrial sensing. Confirm target conditions, configuration and the current datasheet before integration.

ER2000 is a ≥2 mJ, 1535 nm erbium-glass laser module (60 × 25 × 13.5 mm, 105 g, ≤5 V) for long-distance rangefinders and lidar test systems that need millijoule pulses at up to 10 Hz.

WhatsApp about ER2000
From $1,500 USD / unitLowest published unit price at 201+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–5 piecesBase tier$2,000 USDPublished unit price
6–20 pieces$1,900 USDSave 5%
21–50 pieces$1,800 USDSave 10%
51–149 pieces$1,700 USDSave 15%
150–200 pieces$1,600 USDSave 20%
201+ piecesLowest unit price$1,500 USDLowest published price · Save 25%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing ER2000 against nearby models

ER2000 and ER4000 share the same 60 × 25 × 13.5 mm, 105 g housing and ≤5 V supply. ER4000 doubles energy to ≥4 mJ but limits the rate to 1–5 Hz; ER2000 keeps 1–10 Hz.

Compared with ER900, ER2000 is a module rather than a slim component, with more than twice the pulse energy and a narrower ≤4 mrad raw divergence.

Published unit prices start at $1,500 at 201+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

ER2000 datasheet values

Figures are reproduced from the ER2000 datasheet. Read each value together with the test condition printed beside it.

Specifications

ER2000 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥2 mJ and optical pulse width 12 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

ER2000 — current Technical Downloads PDF specifications
ParameterCurrent PDF value
ModelER2000
Laser Wavelength1535nm
Laser classificationClass 1
Pulse energy≥2 mJ
Laser Pulse width12 ns
Drive pulse width≤ 4 ms
Pulse repetition rate1~10 Hz
Pulse stability10%
Raw Beam Diameter0.5 mm
Beam divergence angle≤ 4mrad
Beam ModeTEM00
Operating temperature-40 ℃ ~ +65 ℃
Storage temperature-55 ℃ ~+ 75℃
Dimension (mm)60×25×13.5 mm
Weight105 g
Voltage≤ 5 V
Electric current80 A
Shock1500 G, 0.5 ms
Vibration20~2000 Hz/20 G
Lifetime>1million shots

Source-version clarification

Repetition rate: the current PDF table gives 1–10 Hz; its introduction gives 1–5 Hz. Lifetime: the table gives >1 million shots; the introduction gives ≥10 million. Table entries are displayed; these two ordered ratings are pending confirmation.

Reading this model's optical specifications

The recorded raw beam diameter is 0.5 mm and divergence is ≤ 4mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.

Outline dimensions

ER2000 outline drawing retained from the original product record
ER2000: original outline drawing. Verify the ordered variant and tolerances against its current mechanical drawing.
Integration checklist
INTEGRATION

Integrating ER2000 into your design

  • Supply: ≤5 V. Provide a low-impedance rail sized for the pump pulses.
  • Beam: ≤4 mrad raw divergence.
  • Mounting: 105 g; fix the module to a rigid optical bench so boresight holds under vibration.
  • Temperature: −40 °C to +65 °C.
Applications
APPLICATIONS

Where ER2000 is used

  • Very long-range rangefinders. Distance measurement over long sight lines in clear air.
  • Lidar and atmospheric research. Millijoule 1535 nm pulses for backscatter and propagation studies.
  • Test ranges and calibration benches. A high-energy reference source.
Questions & answers
FAQ

ER2000 integration questions

ER2000 or ER4000?

Same housing and supply. ER4000 gives ≥4 mJ at 1–5 Hz; ER2000 gives ≥2 mJ at up to 10 Hz.

What supply does ER2000 need?

≤5 V according to the datasheet. Confirm current and pulse conditions with us for your batch.

Can ER2000 be used in a handheld?

Its size and mass suit fixed or vehicle instruments better than handheld tools.

HARDWARE

ER2000 mounting, wiring and commands

Taken from the ER2000 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Three mounting lugs: two on one side, 36 mm apart, and one on the opposite side. Hole size and screw size are not stated on the drawing.

Request the ER2000 STEP model for your bracket design.

Engineering Q&A

Questions about ER2000

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about ER2000

ER2000 quick answers

How much does the ER2000 weigh?
105 g.
How much does one ER2000 cost?
$2,000 for 1 piece, shipping included. Volume price from $1,500 at 201+ pieces.
What is the minimum order for the ER2000?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the ER2000 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss ER2000 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).