What the VB series is
The VB series is the smallest family: three single-point sensors that each weigh between 1 and 1.5 g and fit on a board rather than a bracket. They are meant for devices where space and power are tight, such as camera focus assist, small robots, drone altitude hold and compact AGV obstacle detection.
Three models, three supplies
LRF10VB reaches 0.05 to 9 m on a 90% target at 50 Hz, runs from 4.5 to 5.5 V, and is the one module in this group whose datasheet states a 940 nm central wavelength, which the site preserves as written. LRF22VB is a 905 nm sensor for 0.05 to 20 m with selectable output rates up to 200 Hz and a 3.0 to 3.6 V supply, which matches a 3.3 V logic board. LRF50VB extends to 50 m at 100 Hz and accepts 3.3 to 5 V, with the narrowest field of view of the three at 1.9 degrees.
| Model | Range, 90% target | Rate | Supply | Size (mm) | Weight |
| LRF10VB | 0.05–9 m | 50 Hz | 4.5–5.5 V DC | 12 × 7.5 × 9.1 | 1 g |
| LRF22VB | 0.05–20 m | 200 Hz (selectable) | 3.0–3.6 V DC | 21 × 15 × 7.43 | 1.5 g |
| LRF50VB | 0.05–50 m | 100 Hz | 3.3–5 V DC | 18.7 × 11.8 × 13.3 | 1.3 g |
The units point
VB modules report distance in millimetres. The manuals give the example 02 11 as 4354 mm, little-endian, behind a 5C header, with 460800 baud adjustable. An H-series module reports centimetres in a nearly identical frame, so a shared parser must carry a per-family scale factor. Out-of-range output is 65535 for LRF10VB, 20000 for LRF22VB and 50000 for LRF50VB. The LRF50VB manual records two source issues (a checksum example that does not reproduce, and a page header naming LRF50H), so check the datasheet you are sent against the model you ordered.
Who it is for
- Designers of handheld and wearable devices who count grams and milliamps: LRF10VB lists under 0.1 W average with a low-power mode.
- Robotics teams that need short-range sensing at a high rate on a small board.
- Drone builders who want a light altitude sensor; LRF22VB and LRF50VB are the usual starting points.
Where to go next
For beyond 50 m, move to the H series. The short-range dToF sensors article and the drone altimetry article cover the main uses. General selection help is on the laser rangefinder module hub, and requests go through the contact page.