Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationDeveloper docsEngineering community (Q&A)Specifications & CAD
How to buy
Samples & quotationsPrice listCompare modulesDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

LR1500E4 is a 905 ± 5 nm laser rangefinder module from ERDI LASER. Published range: 4–1500 m. Ranging accuracy: ±1 m (D ≤ 400 m); ±(1 + 0.001D) m (D > 400 m). Interface: UART-TTL. From $40 per unit, shipping included (lowest published tier, 501+ pieces; see the volume table below). Updated: 2026-11-06.

How LR1500E4 differs from neighboring models

ItemLR1500E4LR2000E4LR1200E4
Range4–1500 m4–2000 m4–1200 m
Accuracy±1 m (D ≤ 400 m); ±(1 + 0.001D) m (D > 400 m)±1 m (D ≤ 400 m); 0.4% of D (400 m < D ≤ 2000 m)±1 m (D ≤ 400 m); ±(1 + 0.001D) m (D > 400 m)
Beam divergence< 6 mrad (small laser spot)< 6 mrad< 4 mrad (small laser spot)
InterfaceUART-TTLUART-TTLUART-TTL
Supply3.3–5 V3.3–5 V3.3–5 V
Size25.7 × 14.2 × 26.2 mm25.7 × 14.2 × 26.2 mm25.7 × 14.2 × 26.2 mm
Published priceFrom $40 USD / unitFrom $50 USD / unitFrom $35 USD / unit

Related models: LR2000E4, LR1200E4.

LR1500E4 frequently asked questions

What is the measurement range of the LR1500E4?
The published range is 4–1500 m. Actual reach depends on target reflectivity, size and visibility.
What laser wavelength and interface does the LR1500E4 use?
Wavelength: 905 ± 5 nm. Interface: UART-TTL. Supply: 3.3–5 V.
How accurate is the LR1500E4?
Published ranging accuracy: ±1 m (D ≤ 400 m); ±(1 + 0.001D) m (D > 400 m). Update rate: 2–10 Hz (adaptive).
How much does the LR1500E4 cost?
From $40 per unit, shipping included, at 501+ pieces. Smaller quantities use the higher tiers in the volume table (single-piece tier: $100).
What laser safety class is stated for the LR1500E4?
Class 1
Published range
4–1,500 mStandard range; actual reach depends on target and environment.
Interface
UART-TTLCustom configurations are specified separately.
Wavelength
905 ± 5 nm
Weight
≤10 g

The details

LR1500E4 specifications

Read every value with its conditions. View the model documents for integration.

LR1500E4 Specifications

LR1500E4 LR1500E4 Specifications
ParameterSpecification & conditions
Laser wavelength905 ± 5 nm
Measurement range4–1,500 mStandard range; actual reach depends on target and environment.
Ranging accuracy±1 m (D ≤ 400 m); ±(1 + 0.001D) m (D > 400 m)Whiteboard target, 90% reflectivity: 2.3 × 2.3 m for the first distance interval; 2.3 × 4.6 m for the second.
Measurement update rate2–10 Hz (adaptive)Completed distance outputs; not the optical pulse-repetition rate.
Communication interfaceUART-TTLCustom configurations are specified separately.
Baud rate115200 bps
Supply voltage3.3–5 V
Operating temperature−20 °C to +55 °C
Storage temperature−40 °C to +60 °C
Mechanical drawing dimensions25.7 × 14.2 × 26.2 mmDrawing nominal values. Observe the individual tolerances in the model drawing; do not machine from the rounded summary alone.
Weight≤10 g
Ingress protectionIP67Lens cavity only; not a blanket rating for the exposed board or the complete host product.
Laser safety classClass 1As stated in the model manual; finished-equipment assessment is separate.
Laser beam divergence< 6 mrad (small laser spot)
Optical materialResin aspheric lens
Receiver aperture9.2 mm × 14.5 mm
Startup time≤ 200 ms
Inrush current≈ 350 mAApproximate value in the specification table.
Sleep power consumption< 1 mW
Standby power consumption≈ 0.2 WApproximate value in the specification table.
Short-range power consumption≈ 0.4 WApproximate value in the specification table.
Operating power consumption≈ 1 WApproximate value in the specification table.

Documents

Document notes & versions
ENGINEERING FILES

Technical Downloads

Use the current document revision for design review and confirm the ordered connector and mechanical configuration before release.

Product overview

LR1500E4 905 nm Laser Rangefinder Module

LR1500E4 is a laser rangefinder module for OEM integration, with a published test range of 1.5 km and a UART interface. Confirm target conditions, configuration and the current datasheet before integration.

LR1500E4 is the 1500 m, 905 nm module in the 25.7 × 14.2 × 26.2 mm E4 envelope, ≤10 g, for drone and handheld products that need extra reach from a 3.3–5 V supply.

WhatsApp about LR1500E4
From $40 USD / unitLowest published unit price at 501+ pieces. Shipping included.
B2B PURCHASING

Volume Pricing

Published unit prices apply only to the stated quantity band. Configuration, qualification, tax and Incoterm details are confirmed in the quotation.

USD / unit
1–30 piecesBase tier$100 USDPublished unit price
31–200 pieces$80 USDSave 20%
201–500 pieces$50 USDSave 50%
501+ piecesLowest unit price$40 USDLowest published price · Save 60%
Commercial terms and lead time are confirmed in the quotation.

Integration library

Go into the details.

Drawings, test conditions and application notes. Open the part you need.

Selection
SELECTION

Choosing LR1500E4 against nearby models

It matches LR1500E2 in range and beam (<6 mrad) but uses the taller E4 body.

For 2000 m in the same envelope, LR2000E4 is the next step, with ≈1.2 W draw. For a smaller spot at shorter range, LR1200E4 lists <4 mrad.

Published unit prices start at $40 at 501+ pieces; see Volume Pricing for all quantity bands.

Technical documentation & drawings
SPECIFICATIONS

LR1500E4 datasheet values

Figures are reproduced from the LR1500E4 datasheet. Read each value together with the test condition printed beside it.

ParameterValueConditions / notes
Laser wavelength905 ± 5 nm—
Measurement range4–1500 mStandard range; actual reach depends on target and environment.
Ranging accuracy±1 m (D ≤ 400 m); ±(1 + 0.001D) m (D > 400 m)Whiteboard target, 90% reflectivity: 2.3 × 2.3 m for the first distance interval; 2.3 × 4.6 m for the second.
Measurement update rate2–10 Hz (adaptive)Completed distance outputs; not the optical pulse-repetition rate.
Communication interfaceUART-TTLCustom configurations are specified separately.
Baud rate115200 bps—
Supply voltage3.3–5 V—
Operating temperature−20 °C to +55 °C—
Storage temperature−40 °C to +60 °C—
Mechanical drawing dimensions25.7 × 14.2 × 26.2 mmDrawing nominal values. Observe the individual tolerances in the model drawing; do not machine from the rounded summary alone.
Weight≤10 g—
Ingress protectionIP67Lens cavity only; not a blanket rating for the exposed board or the complete host product.
Laser safety classClass 1As stated in the model manual; finished-equipment assessment is separate.
Laser beam divergence< 6 mrad (small laser spot)—
Optical materialResin aspheric lens—
Receiver aperture9.2 mm × 14.5 mm—
Startup time≤ 200 ms—
Inrush current≈ 350 mAApproximate value in the specification table.
Sleep power consumption< 1 mW—
Standby power consumption≈ 0.2 WApproximate value in the specification table.
Short-range power consumption≈ 0.4 WApproximate value in the specification table.
Operating power consumption≈ 1 WApproximate value in the specification table.

Operation and Data Output

Single-shot mode requests one reported distance. For a weak return, the manual describes repeated internal measurements before reporting stable distance data. Continuous mode produces repeated results at the documented adaptive update rate.

The standard measurement-rate specification is 2–10 Hz (adaptive). Higher-rate custom versions mentioned in the manual are separate configurations, not the default performance of a standard unit.

Electrical Interface

PinSignalFunction
1GNDPower ground
2VCCPower input
3I/O (Reserved)Reserved for expansion
4TXDTransmit data: module → host
5RXDReceive data: host → module
6SW-SHOTFunction-enable input. The required control polarity must match the supplied configuration.

Mechanical Dimensions

Use the drawing and its tolerances for installation. This drawing is reproduced directly from the current LR1500E4 user manual.

LR1500E4 mechanical drawing, current user manual page 4
LR1500E4 Mechanical DrawingManual page 4. Open the PDF to inspect the original dimensions and tolerances.
Integration checklist
INTEGRATION

Integrating LR1500E4 into your design

  • Supply: 3.3–5 V; sleep below 1 mW.
  • UART-TTL, 115200 bps; 2–10 Hz adaptive output.
  • Accuracy: ±1 m to 400 m and ±(1 + 0.001D) m beyond, on a 90% whiteboard for the first interval.
  • Operating temperature: −20 °C to +55 °C.
Applications
APPLICATIONS

Where LR1500E4 is used

  • Mapping drones. Altitude and terrain distance at higher flight levels.
  • Long-range handhelds. 1500 m reach in a light module.
  • Remote monitoring. Stockpile and slope distance.
Questions & answers
FAQ

LR1500E4 integration questions

Why does LR1500E4's accuracy formula differ from LR1500E2's?

The two datasheets state different interval breakpoints. Use the document for the exact variant you order.

Is IP protection specified?

The LR1500E4 v1.2 manual (2025.10) lists IP67 for the inside of the lens cavity only. That statement does not establish a whole-module or installed-system ingress rating. Confirm the enclosure and connector-sealing requirements for your application before design release.

What is the price?

$100 per unit at list.

HARDWARE

LR1500E4 mounting, wiring and commands

Taken from the LR1500E4 outline drawing and user manual. Check hole positions against the drawing or the STEP file before machining a bracket.

Mounting

Four M1.6 threaded mounting holes at the flange corners, on 23.5 x 11.5 mm centres. Thread depth is not stated on the drawing; a STEP file is available on request.

Request the LR1500E4 STEP model for your bracket design.

Serial settings

Default baud rate
115200 bit/s
Checksum
Send frames: low 8 bits of the sum of bytes 3 to 7. Reply frames: low 8 bits of the sum of bytes 1 to 7.

Common commands

CommandSend (hex)Reply (hex)Notes
Single measurement55 AA 88 FF FF FF FF 8455 AA 88 STA FF DIS_H DIS_L SUM[1:7]STA = 1: success. DIS_H/DIS_L = distance high/low byte; the reported value is 10 x the measured value.
Continuous measurement55 AA 89 FF FF FF FF 8555 AA 89 STA FF DIS_H DIS_L SUM[1:7]STA = 1: success. DIS_H/DIS_L = distance high/low byte; the reported value is 10 x the measured value.
Stop measurement55 AA 8E FF FF FF FF 8A55 AA 8E STA FF FF FF SUM[1:7]STA = 1: stopped; STA = 0: failed.

Frames follow the LR1500E4 user manual; every full frame has been checked against the manual's checksum rule. Open-source drivers: Drivers & wiring.

Engineering Q&A

Questions about LR1500E4

Wiring, protocol or integration question? Ask in the ERDI engineering community.

Ask an engineer about LR1500E4

LR1500E4 quick answers

How much does the LR1500E4 weigh?
≤10 g.
What power does the LR1500E4 need?
Supply: 3.3–5 V.
Which interface does the LR1500E4 use?
UART-TTL.
How much does one LR1500E4 cost?
$100 for 1 piece, shipping included. Volume price from $40 at 501+ pieces.
What is the minimum order for the LR1500E4?
1 piece. Pay online by card or PayPal, or by bank transfer; shipping is free worldwide.
What is the LR1500E4 lead time?
Standard warranty: one year. The lead time is stated on your proforma invoice (PI) before you pay.

Laser safety & status

Laser class
Class 1 (IEC 60825-1)
Status
Available to order

Laser class as stated in the module document. Classification of your finished product depends on its optical path and configuration.

ERDI TECH

Manufacturer · Chengdu · Founded 2021

Evidence-backed certifications: ISO 9001 · CE EMC

Technical inquiry

Discuss LR1500E4 for your application.

Share the target, range, interface and expected quantity. Your selected model stays attached to the inquiry.

Request a review or quotation

Start with your work email and one line about the module or application. Add technical details if you have them.

No models attached.Name the models you are comparing in the requirement, or send the requirement without one.
Send me
Add technical requirements (optional)
Add project & contact details (optional)
Preparing the form. You can also send your request by email.

We reply within one business day (Chengdu, UTC+8).