Skip to main content
Explore ERDILRF
ERDILRF LaserOptics. Electronics. Integration.
Products
905 nm sensors & rangefindersLR seriesSPD seriesH seriesVB seriesLRF A seriesOther product platforms1.54 µm laser sources1535 nm rangefindersAll products
Applications
Application overviewOptical observationCivil UAVsSite monitoringIndustrial sensingHandheld instrumentsField measurement
Insights
Product SpotlightEngineering knowledgeProduct filmsInside ERDILRF
Support
Technical supportFrequently asked questionsModel selectorContact our team
Downloads
All downloadsDrivers & integrationSpecifications & CAD
How to buy
Samples & quotationsDealer programRequest a sample
Company
About ERDILRFCertificatesContact usPrivacy policyTerms
Talk to Sales

Press ↑↓ to move, Enter to open, Esc to close.

LRF1830C · 1.54 µm Laser Rangefinder Module

LRF1830C UART wiring, pinout and serial protocol

The LRF1830C talks RS-422 in the specification table; TTL/RS-422 alternatives in the interface section and is powered from DC 12 V. Wire TX to the host RX, RX to the host TX, share ground, then send one of the commands below.

Electrical interface

ParameterPublished valueCondition / note
InterfaceRS-422 in the specification table; TTL/RS-422 alternatives in the interface section
ConnectorJ30J in the specification table; Molex 51021-0500 alternative in the interface section
Supply voltageDC 12 V

LRF1830C pinout

PinSignalNote
1TTL RX3.3V
2TTL TX3.3V
3CTRL3.3V-5V power on, 0V power off
4+12VPower supply+
5GNDPower supply-
1GNDSerial Port Ground
2GND12V Input Negative
3GND12V Input Negative
4VCC 5V12V Input Positive
5VCC 5V12V Input Positive
6RS422 RX+Serial Port Receive +
7RS422 RX-Serial Port Receive -
8RS422 TX-Serial Port Transmit -
9RS422 TX+Serial Port Transmit +

Reading it from a computer

Open the port at the baud rate above, 8 data bits, no parity, 1 stop bit. The UART protocol decoder shows the frames live in a browser over WebSerial, and the erdi-lrf-drivers repository has Python, Arduino and ROS 2 readers for this frame format.

Ordering the LRF1830C

The published single-unit price of the LRF1830C is $7,000, falling to $3,500 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: LRF1830C model page.

FAQ

What is the maximum range of the LRF1830C?

The published range is ≥18,000 m to a 3 × 3 m object; line of sight; visibility ≥26 km; relative humidity ≤50% at 30 °C. A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.

Which interface does the LRF1830C use?

The published communication interface is RS-422 in the specification table; TTL/RS-422 alternatives in the interface section.

What laser wavelength does the LRF1830C use?

The published wavelength is 1.54 µm ±0.02 µm; laser safety entry: Class I stated in the module document; complete configuration requires its own assessment.

How much does the LRF1830C cost?

The published single-unit price of the LRF1830C is $7,000, falling to $3,500 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com.

Related guides

Model records

Open the model page for the full specification table, downloads, published price and ordering.

  • LRF1830C — LRF1830C 1.54 µm Laser Rangefinder Module