SPD1200Z2 · 905 nm Laser Rangefinder Module
SPD1200Z2 datasheet: specifications, range conditions, interface
Every value below is copied from the published SPD1200Z2 specification table with its test condition, so you can compare it with other modules on equal terms.
SPD1200Z2 key specifications
| Item | Published value |
|---|---|
| Model | SPD1200Z2 |
| Published range | Catalog range: 0.2–1,200 m; strong sunlight or low visibility may reduce range. Sources also list a 1,500 m night-time maximum under special conditions; it is not a guaranteed range. |
| Wavelength | 905nm±5nm |
| Interface | UART-TTL, Customizable |
| Accuracy | Current published table and archived factory PDF: ±0.2 m (d≤200 m); ±0.5 m (d≤400 m); ±(0.5 m + 0.001d) (400 m<d<1,200 m). Archived factory DOCX: ±0.3 m (d≤100 m); ±(0.3 m + 0.0007d) (100 m<d<1,200 m). Sources differ; confirm the supplied configuration. d is distance in metres. |
| Update rate | Current published table and archived factory PDF technical table: 2–20 Hz adaptive. Archived PDF overview: 2–15 Hz; its continuous-mode section gives typical 2 Hz and maximum 15 Hz. Archived factory DOCX technical table: 2–20 Hz; its continuous-mode section gives typical 2 Hz and maximum 20 Hz. Confirm the supplied mode/configuration; sources differ. |
| Supply | 3.3V~5V |
| Weight | ≈6g |
| Dimensions | Current published table and archived factory PDF: 7.2 × 14.8 × 28.2 mm. Archived factory DOCX: 28.2 × 14.8 × 10.2 mm. Sources differ; confirm the supplied drawing. |
| Laser safety | IEC CLASS I |
| Price | From $150 per unit |
Full specification table
ERDI published product specifications, captured 2026-10-08.
| Parameter | Published value | Condition / note |
|---|---|---|
| Laser wavelength | 905nm±5nm | |
| Laser Divergence Angle | <6mrad | |
| Optical material | Aspherical Lens | |
| Aperture Size | 5.0mm × 7mm | |
| Measurement range | Catalog range: 0.2–1,200 m; strong sunlight or low visibility may reduce range. Sources also list a 1,500 m night-time maximum under special conditions; it is not a guaranteed range. | |
| Ranging accuracy | Current published table and archived factory PDF: ±0.2 m (d≤200 m); ±0.5 m (d≤400 m); ±(0.5 m + 0.001d) (400 m<d<1,200 m). Archived factory DOCX: ±0.3 m (d≤100 m); ±(0.3 m + 0.0007d) (100 m<d<1,200 m). Sources differ; confirm the supplied configuration. d is distance in metres. | |
| Measurement frequency | Current published table and archived factory PDF technical table: 2–20 Hz adaptive. Archived PDF overview: 2–15 Hz; its continuous-mode section gives typical 2 Hz and maximum 15 Hz. Archived factory DOCX technical table: 2–20 Hz; its continuous-mode section gives typical 2 Hz and maximum 20 Hz. Confirm the supplied mode/configuration; sources differ. | |
| Valid measurement rate | ≥98% | |
| False alarm rate | ≤1% | |
| Interface | UART-TTL, Customizable | |
| Baud rate | Default 115200bps, Optional 9600bps | |
| Supply voltage | 3.3V~5V | |
| Start-up Time | ≤200ms | |
| Peak Start-up Current | ≈350mA | |
| Operating Power Consumption | Average ≈0.45 W in both sources. Current published table and archived factory PDF: maximum ≈0.7 W. Archived factory DOCX: maximum ≤0.75 W. Sources differ; confirm the supplied configuration. | |
| Operating temperature | −20 °C~+60 °C | |
| Storage temperature | Current published table and archived factory PDF: −40 to +60 °C. Archived factory DOCX: −30 to +70 °C. Sources differ; confirm the supplied configuration. | |
| Ingress Protection | Lens cavity IP67 | |
| Laser safety class | IEC CLASS I | |
| Dimension | Current published table and archived factory PDF: 7.2 × 14.8 × 28.2 mm. Archived factory DOCX: 28.2 × 14.8 × 10.2 mm. Sources differ; confirm the supplied drawing. | |
| Weight | ≈6g | |
| Shock Resistance | 1000g/ms (10 times/s, optical axis direction) | |
| Vibration Resistance | 5~50~5 Hz, 1 octave/min, 2.5g | |
| Reliability | MTBF≥1500h |
Connector pinout
| Pin | Signal | Note |
|---|---|---|
| 1 | SW-SHOT | Function Enable (active high) Note: Compatible with active-low control requirements |
| 2 | RXD | Signal input port, Host → Ranging Module |
| 3 | TXD | Signal output port, Ranging Module → Host |
| 4 | I/O (Reserved) | Reserved for expansion |
| 5 | VCC | Power + |
| 6 | GND | Power − |
Published applications
- Outdoor observation devices
- Civilian surveying instruments
- Outdoor sports equipment
Ordering the SPD1200Z2
The published single-unit price of the SPD1200Z2 is $150. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: SPD1200Z2 model page.
FAQ
What is the maximum range of the SPD1200Z2?
The published range is Catalog range: 0.2–1,200 m; strong sunlight or low visibility may reduce range. Sources also list a 1,500 m night-time maximum under special conditions; it is not a guaranteed range.. A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.
Which interface does the SPD1200Z2 use?
The published communication interface is UART-TTL, Customizable @ Default 115200bps, Optional 9600bps.
What laser wavelength does the SPD1200Z2 use?
The published wavelength is 905nm±5nm; laser safety entry: IEC CLASS I.
How much does the SPD1200Z2 cost?
The published single-unit price of the SPD1200Z2 is $150. Prices include shipping and are ordered directly from erdilrf.com.
Related guides
- SPD1200Z2 UART wiring, pinout and protocol
- SPD1200Z2 price and ordering
- SPD1200Z2 power supply and current
- SPD1200Z2 accuracy and range test conditions
- SPD1200Z2 dimensions and weight
- UART laser rangefinder modules
- 905 nm laser rangefinder modules
- Class 1 laser rangefinder modules
- surveying laser rangefinder modules
Model records
Open the model page for the full specification table, downloads, published price and ordering.
- SPD1200Z2 — SPD1200Z2 905 nm Laser Rangefinder Module