Last updated 18 November 2026 by ERDI LASER (ERDI TECH LTD).
ERDI LASER is the laser rangefinder module line of ERDI TECH LTD, made in Chengdu, China. This page is the catalog by range: pick the distance you need, then open the model page for the datasheet, the protocol and the price ladder. The company profile is on the Who is ERDI LASER page and the ERDI TECH page.
ERDI LASER modules by range
| Model | Wavelength | Listed range | Interface | Price, shipping included |
|---|---|---|---|---|
| LRF10VB | 940 nm | 0.05–9 m (90% target) | UART | $10 for 1 to 19 pieces |
| LRF22VB | 905 nm | 0.05–20 m (90% target) | UART / I2C | $12 for 1 to 19 pieces |
| LRF50H | 905 nm | 0.05–50 m (90% target) | UART | $100 for 1 to 19 pieces |
| LRF600H | 905 nm | 0.05–600 m (90% target) | UART / I2C | $350 for 1 to 30 pieces |
| LRF1200A1 | 905 nm | 5–1,200 m (building target) | UART, 3.3 V TTL | $90 for 1 to 30 pieces |
| LR1500E2 | 905 nm | 4–1,500 m (depends on target) | UART-TTL | $100 for 1 to 30 pieces |
| LRF3000A1 | 905 nm | ≥3,000 m (70% building target, visibility ≥4 km) | UART, 3.3 V TTL | $200 for 1 to 30 pieces |
| LRF0305C | 1535 nm | ≥4,000 m (60% building target) | UART, 3.3 V TTL | $500 for 1 to 19 pieces |
| LRF0405C | 1535 nm | ≥4,000 m (30% reflectivity, visibility ≥6 km) | UART, 3.3 V TTL | $650 for 1 to 19 pieces |
| LRF0815C | 1535 nm | ≥8,000 m (2.3 m × 2.3 m target, 30%, visibility ≥10 km) | RS-422; TTL optional | $1,500 for 1 to 10 pieces |
These ten are a selection. The complete list of 47 modules, with every range condition stated, is on the laser rangefinder module hub, and the full ladders are on the price page.
905 nm or 1535 nm?
The 905 nm ERDI LASER modules are the small, low-cost choice: from a 1 g board at $10 to modules that list 3 km. The 1535 nm modules cost more and reach further: LRF0305C lists 4,000 m, and the larger models list up to 18 km. The trade-offs are explained in 905 nm vs 1535 nm.
What every ERDI LASER module page gives you
- The range with its target and visibility conditions, not a bare maximum.
- The interface, supply voltage and serial protocol.
- A public price ladder in USD, shipping included, from one piece.
- The PDF datasheet and, where available, a STEP model.
Not sure which one fits? Use the selector or compare against other makers on the comparison pages, which state our weaker points too.
Frequently asked questions
What is ERDI LASER?
ERDI LASER is the laser rangefinder module brand of ERDI TECH LTD, a company in Chengdu, China, founded on 7 May 2021. The modules and this website, erdilrf.com, carry the ERDI LASER and ERDILRF names.
What ERDI LASER laser rangefinder modules are there?
There are 47 laser rangefinder modules at 905 nm, 940 nm and 1535 nm, with listed ranges from 9 m to 18 km, plus 12 erbium-glass laser sources. The table on this page lists ten of them; the hub page lists all.
Where can I see ERDI LASER prices?
Every model has a published USD price ladder with shipping included, from one piece, on the price page of erdilrf.com.
Does ERDI LASER publish datasheets and drivers?
Yes. PDF datasheets, serial protocols and open-source drivers (Arduino, Raspberry Pi, ROS 2, Python) are on the downloads page and in the ErdiTech repositories on GitHub.
How do I contact ERDI LASER?
Email tommy@erdimail.com or use the contact page on erdilrf.com.
Contact
Email tommy@erdimail.com or use the contact page. WhatsApp: +86 133 0819 5790.