LRF200H · 905 nm LiDAR Distance Sensor
LRF200H accuracy and range test conditions
A range number needs a target and conditions. For the LRF200H the published figure is 0.05–200 m (90% reflectivity); 0.05–70 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). Accuracy: ±10 cm (<10 m); 1% (≥10 m).
Range, accuracy and rate as published
| Parameter | Published value | Condition / note |
|---|---|---|
| Measurement range | 0.05–200 m (90% reflectivity); 0.05–70 m (10% reflectivity) | The two source values remain bound to their stated target reflectivity. |
| Measurement frequency | 20 Hz-10 kHz (default: 1 kHz) | Confirm against the controlled model document |
| Accuracy | ±10 cm (<10 m); 1% (≥10 m) | Confirm against the controlled model document |
| Repeatability | ±5 cm (<10 m); ±10 cm at 200 m | Confirm against the controlled model document |
| Ambient-light immunity | 100 klx | Confirm against the controlled model document |
How to read the conditions
Reflectivity is the fraction of laser light the target returns: a white board is about 90 percent, a building about 70 percent, grass and soil 10–30 percent. Visibility limits long-range figures because haze absorbs the pulse both ways. When two modules quote different targets, convert both to the same target before comparing; the open module database lists every vendor's condition next to its number.
Ordering the LRF200H
The published single-unit price of the LRF200H is $250, falling to $100 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: LRF200H model page.
FAQ
What is the maximum range of the LRF200H?
The published range is 0.05–200 m (90% reflectivity); 0.05–70 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.
Which interface does the LRF200H use?
The published communication interface is UART, IIC.
What laser wavelength does the LRF200H use?
The published wavelength is 905 nm; laser safety entry: Class 1.
How much does the LRF200H cost?
The published single-unit price of the LRF200H is $250, falling to $100 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com.
Related guides
- LRF200H datasheet and specifications
- LRF200H UART wiring, pinout and protocol
- LRF200H Pixhawk / ArduPilot setup
- LRF200H ROS 2 driver
- LRF200H Arduino library
- LRF200H Raspberry Pi Python reader
- LRF200H price and ordering
- LRF200H power supply and current
- LRF200H dimensions and weight
- UART laser rangefinder modules
- I2C laser rangefinder modules
- 905 nm laser rangefinder modules
- Class 1 laser rangefinder modules
- AGV obstacle avoidance laser rangefinder modules
- industrial and level measurement laser rangefinder modules
Model records
Open the model page for the full specification table, downloads, published price and ordering.