LRF3000A1 · 905 nm Laser Rangefinder Module
LRF3000A1 datasheet: specifications, range conditions, interface
Every value below is copied from the published LRF3000A1 specification table with its test condition, so you can compare it with other modules on equal terms.
LRF3000A1 key specifications
| Item | Published value |
|---|---|
| Model | LRF3000A1 |
| Published range | ≥3,000 m (70%-reflectivity building target; clear weather; visibility ≥4 km.) |
| Wavelength | 905 ± 10 nm |
| Interface | UART, 3.3 V TTL |
| Accuracy | ±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m) |
| Update rate | Normal: 3–10 Hz; long-range: 1–10 Hz |
| Supply | 3.3–5 V DC |
| Weight | 12 ± 0.5 g |
| Dimensions | See model-specific mechanical drawing |
| Laser safety | Class 1 (IEC 60825-1) |
| Price | From $80 per unit |
Full specification table
ERDI published product specifications, captured 2026-10-08.
| Parameter | Published value | Condition / note |
|---|---|---|
| Laser wavelength | 905 ± 10 nm | |
| Maximum measurement distance | ≥3,000 m | 70%-reflectivity building target; clear weather; visibility ≥4 km. |
| Minimum measurement distance | 1 m | 90%-reflectivity whiteboard. |
| Ranging accuracy | ±0.7 m (D ≤ 100 m); ±(0.7 + 0.003D) m (D > 100 m) | Building target; D is distance in meters. |
| Measurement update rate | Normal: 3–10 Hz; long-range: 1–10 Hz | Adaptive in both modes. |
| Interface | UART, 3.3 V TTL | |
| Baud rate | 115200 bps default; 9600 bps | |
| Supply voltage | 3.3–5 V DC | Ripple <0.1 V. |
| Standby power consumption | ≤350 mW | Power-on input pulled low. |
| Low-power consumption | ≤1 mW | Power-on input pulled high. |
| Operating power consumption | ≤1.8 W at +25 °C; ≤1.6 W at −20 °C | +3.3 V input. These entries do not extend the operating-temperature range. |
| Laser beam divergence | ≤10 mrad | |
| Field of view | ≈8 mrad | |
| Weight | 12 ± 0.5 g | |
| Operating temperature | −20 °C to +60 °C | |
| Storage temperature | −25 °C to +75 °C | |
| Laser safety class | Class 1 (IEC 60825-1) | As stated in the model manual; finished-equipment assessment is separate. |
| Ingress protection | IP67 | Module rating stated in the model manual; the host enclosure requires its own assessment. |
| Valid measurement rate | ≥98% | Source-stated in the current LRF3000A1 user manual, p.2. |
| False alarm rate | ≤1% | Source-stated in the current LRF3000A1 user manual, p.2. |
| Response time | Start-up ≤160 ms + first ranging 100 ms (short range) to 517 ms (long range) | System start-up plus first ranging; current model manual, p.2. |
| Average laser power | 7.63 mW | Current model manual, p.3. |
| Vibration | 5–50–5 Hz, 1 octave/min, 2.5 g | Current model manual, p.3. |
| Reliability | MTBF ≥1500 h | Source-stated reliability figure, current model manual p.3; not a service-life guarantee. |
| Dimensions | See model-specific mechanical drawing | Current manual Section 5, p.5. Use its mounting geometry and tolerances. |
Published applications
- Handheld optics
- Survey instruments
- UAV payloads
- Embedded EO systems
Ordering the LRF3000A1
The published single-unit price of the LRF3000A1 is $200, falling to $80 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: LRF3000A1 model page.
FAQ
What is the maximum range of the LRF3000A1?
The published range is ≥3,000 m (70%-reflectivity building target; clear weather; visibility ≥4 km.). A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.
Which interface does the LRF3000A1 use?
The published communication interface is UART, 3.3 V TTL @ 115200 bps default; 9600 bps.
What laser wavelength does the LRF3000A1 use?
The published wavelength is 905 ± 10 nm; laser safety entry: Class 1 (IEC 60825-1).
How much does the LRF3000A1 cost?
The published single-unit price of the LRF3000A1 is $200, falling to $80 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com.
Related guides
- LRF3000A1 UART wiring, pinout and protocol
- LRF3000A1 Pixhawk / ArduPilot setup
- LRF3000A1 ROS 2 driver
- LRF3000A1 Arduino library
- LRF3000A1 Raspberry Pi Python reader
- LRF3000A1 price and ordering
- LRF3000A1 power supply and current
- LRF3000A1 accuracy and range test conditions
- LRF3000A1 dimensions and weight
- UART laser rangefinder modules
- 905 nm laser rangefinder modules
- Class 1 laser rangefinder modules
- drone altimeter laser rangefinder modules
- gimbal and payload laser rangefinder modules
- surveying laser rangefinder modules
Model records
Open the model page for the full specification table, downloads, published price and ordering.