Last updated 18 November 2026 by ERDI LASER (ERDI TECH LTD).
ERDI LASER (ERDI TECH LTD) laser rangefinder modules speak UART at TTL level. None of the 59 catalog records lists RS-485 or RS-232 as its interface, and that is the short answer to the question this page gets asked most. What you can get is below: RS485 through a converter on any TTL module, RS-422 built in on the larger 1535 nm modules, and a short list of what to check before you wire anything. The full range is on the laser rangefinder module hub.
The honest summary
- RS485 from a compact module: use an external TTL-to-RS485 converter. The factory confirmed this for the LRF0305C on 13 November 2026, and the wiring is the same on the other TTL models.
- RS-422 built in: the heavier 1535 nm modules (LRF0610C, LRF0815C, LRF1017C, LRF1221C, LRF1222C, LRF1525C, LRF1829C, LRF1831C).
- RS232: not offered. Use a level shifter between the module and the RS-232 port.
- CAN, Ethernet, Modbus: not offered by the module itself.
Interface by series
| Series / model | Wavelength | Interface in the catalog record | Supply | Weight |
|---|---|---|---|---|
| LR and SPD1200 families, e.g. LR1500E2, SPD1200N2 | 905 nm | UART-TTL | 3.3 to 5 V | 5 to 10 g |
| LRF1200A1, LRF3000A1 | 905 nm | UART, 3.3 V TTL | 3.3 V; 3.3 to 5 V | 18 g; 12 g |
| H series, e.g. LRF200H | 905 nm | UART and I2C (LRF50H: UART) | 9 to 36 V | 15 to 20 g |
| VB series, e.g. LRF50VB | 905 nm (LRF10VB 940 nm) | UART; UART and I2C | 3.0 to 5.5 V by model | 1 to 1.5 g |
| LRF0305C, LRF0306C, LRF0405C | 1535 nm | UART, 3.3 V TTL | 3 to 5 V | 14 to 32 g |
| LRF0610C, LRF0815C | 1535 nm | TTL or RS-422, selectable; confirm the ordered version | 12 V DC | 90 g; 175 g |
| LRF1017C to LRF1831C | 1535 nm / 1.54 um | RS-422 (LRF1830C also lists TTL as an alternative) | 12 V DC | 275 to 410 g |
Values are from the model records and datasheets on this site; open the model page for the exact connector and pin table.
Getting RS485 from a TTL module
The factory’s written answer for the LRF0305C is: the module’s UART is TTL level, any TTL-to-RS485 converter board works, and orders of two or more units can include one. The converter is a generic board with no ERDI LASER (ERDI TECH LTD) model number, so there is no ERDI price for it on the site.
The points below are ordinary RS485 practice. They are not statements from the datasheet, so check them against your converter:
- Logic level. The LRF0305C datasheet lists UART (TTL 3.3 V). Use a converter whose TTL side is 3.3 V, or add level matching in front of a 5 V board.
- Direction control. Two-wire RS485 is half-duplex. Most small converters switch direction automatically. Test them with the module in continuous ranging mode, where the module sends frames without waiting for a command.
- Supply. The converter does not power the module. The LRF0305C runs on 3 to 5 V DC and lists a peak below 3 W at 5 V, so size the supply for the peak, not the average.
- Cable and termination. Twisted pair, one termination resistor at each end of a long run, and a common reference. Run length limits come from your converter and cable, not from the rangefinder.
RS-422 on the 1535 nm modules
The LRF0815C datasheet lists a TTL connector (Molex 51021-0500: 3.3 V RX and TX, CTRL, +12 V, GND) and an RS-422 connector (J30J with RX+/RX- and TX+/TX- plus power and ground). Serial format is 115200 bps, 8N1. The module takes 12 V DC and weighs 175 g or less. LRF0610C offers the same TTL or RS-422 choice at 90 g or less. The LRF1017C and larger models list RS-422. The mating connector and cable are supplied per order configuration, so state the interface when you ask for a quote.
RS232
No catalog record lists RS-232. If your host only has an RS-232 port, use a TTL-to-RS-232 level shifter. RS-232 voltage swings are far larger than TTL, so never connect a module pin straight to an RS-232 port.
Where other makers are ahead
If you need native RS485 or RS232 with no converter, other makers cover it today. Benewake’s product list (read 18 November 2026) shows RS-485 on the TFmini-i and TF02-i (12 m and 40 m, IP65) and the SR18, RS-232 on the TFA170-L, and UART, CAN, RS-232 and RS-485 on the TF03 (180 m, IP67) and TF350 (350 m, IP67). Meskernel’s TF3800 page lists RS232 / RS485 as optional on a 1535 nm module. We do not list native RS485, so on that one requirement they are ahead. Where ERDI is stronger is price published per quantity with shipping included, and the 1535 nm range up to 18 km.
Picking a module for an industrial RS485 system
- Up to 100 m, sensor-style, 9 to 36 V supply: the H series, for example LRF100H ($200 for 1 to 19 pieces, $80 at 1,000+ pieces, shipping included). UART output, so add a converter.
- 1 km class at low cost: LR1000E2 ($80 for 1 to 30 pieces, $30 at 501+ pieces, shipping included). UART-TTL at 3.3 to 5 V, 3 to 10 Hz.
- 3 to 4 km, eye-safe, small: LRF0305C ($500 for 1 to 19 pieces, $300 at 500+ pieces, shipping included). Module body rated IP67 by the factory; there is no standard sealed outdoor housing, but one can be quoted for volume.
- Long distance with RS-422 built in: LRF0815C ($1,500 for 1 to 10 pieces, $900 at 1,001+ pieces, shipping included).
Before you order, send the host interface, the cable length and the supply voltage, and we will tell you which version and converter fits. See also the UART-TTL integration guide and the frame and checksum basics.
Frequently asked questions
Does ERDI LASER make a laser rangefinder module with native RS485?
No model in the published catalog lists RS-485 as its interface. The 905 nm and compact 1535 nm modules use UART at TTL level. For RS485 on a TTL module the factory answer (LRF0305C, 13 November 2026) is that any TTL-to-RS485 converter board works.
Does any ERDI LASER module have RS232?
No. No catalog record lists RS-232. A UART TTL module can be connected to an RS-232 port through a TTL-to-RS-232 level shifter, which is a standard external part and not an ERDI product.
Which ERDI LASER modules have RS-422?
The larger 1535 nm modules: LRF0815C and LRF0610C offer TTL or RS-422 (confirm the ordered version), and LRF1017C, LRF1221C, LRF1222C, LRF1525C, LRF1829C, LRF1830C and LRF1831C list RS-422.
Can I use RS-422 on an RS485 bus?
Electrically RS-422 is a four-wire full-duplex link (RX+/RX- and TX+/TX- on the LRF0815C connector). It can talk to a four-wire RS485 port in most designs; it is not a multi-drop two-wire RS485 node. Send us the host transceiver part number before you order.
Will ERDI LASER supply the converter board?
For LRF0305C, a converter board can be included with orders of two or more units (factory answer, 13 November 2026). For other TTL models the same wiring applies, but whether a board ships with the order must be confirmed on the quote. The board is a generic part and has no ERDI model number.
What TTL level do I have to match on the converter?
The LRF0305C datasheet states UART (TTL 3.3 V). A converter whose TTL side is 5 V needs level matching. Read the UART level in the datasheet of your exact model before wiring.
What should I buy if I need native RS485 or RS232 off the shelf?
Benewake lists RS-485 and RS-232 on its TF03 and TF350 (read 18 November 2026), and Meskernel’s TF3800 page lists RS232 / RS485 as optional. If native RS485 at 180 to 350 m matters more to you than price or the 1535 nm range, those are the parts to look at.
Where to go next
Back to the laser rangefinder module hub. Model pages: LRF0305C, LRF0815C, LR1500E2, LRF100H. Filter by interface in the selector, see all prices on the price page, or read who ERDI LASER is.
For a quote, a sample or a selection check, email tommy@erdimail.com or use the contact page.
Sources and dates
- ERDI values: the model pages and datasheets on erdilrf.com and the published catalog; factory answer on RS485 and IP67, 13 November 2026.
- Benewake: product list, read 18 November 2026.
- Meskernel: TF3800 page, read 18 November 2026.