The Jenoptik DLEM 20 is listed at 5 km, 0.5 m accuracy or better and 30 g or less, on 1.5 micrometre diode lasers; Jenoptik publishes no price and takes quotes through a form. The closest ERDI 1535 nm part is the LRF0405C: 4,000 m or more at 30% reflectance, +/- 2 m, 32 g or less, $650 for 1 to 19 pieces. If weight matters more than the last kilometre, the LRF0305C is 14 g or less.
Specification comparison
| Parameter | Jenoptik DLEM 20 (source) | LRF0405C | LRF0305C |
|---|---|---|---|
| Wavelength | 1.5 micrometre diode laser (stated for the DLEM family) | 1535 +/- 5 nm | 1535 +/- 5 nm |
| Range | 5 km (target not stated on the web page) | 4,000 m or more at 30% reflectance, visibility 6 km or more; 1,200 m or more on a 0.5 x 1.7 m target | 4,000 m or more at 60% reflectivity; 3,000 m or more on a building at 30% |
| Accuracy | 0.5 m or better | +/- 2 m | See model page |
| Update rate | Up to 25 Hz (stated for the family) | Single shot or 1 to 10 Hz; up to 3 targets reported | See model page |
| Weight | 30 g or less | 32 +/- 1 g (per the module datasheet) | 14 +/- 1 g (per the module datasheet) |
| Size | Not on the web page | 48 x 30.5 x 21 mm | See model page |
| Interface | One shared interface across the family (type not named on the page) | UART, 3.3 V TTL | UART, 3.3 V TTL |
| Beam divergence | Not on the web page | 0.6 mrad or less | See model page |
| Operating temperature | Wide range stated, no figure on the web page | -40 to +70 C | See model page |
| Price (USD) | Not published; quote through the inquiry form | $650 for 1 to 19 pcs; $400 from 500 pcs | $500 for 1 to 19 pcs; $300 from 500 pcs |
Which one fits which job
DLEM 20 fits a design where accuracy under a metre is the main requirement and you want a supplier that cites more than 40 years in laser rangefinders: the web page claims accuracy of 0.5 m or better and up to 25 Hz for the family, and the datasheet is a free PDF. LRF0405C fits a budget-driven build, a first prototype, or a small series where a public price and a single-piece order matter. The module is specified at +/- 2 m and 1 to 10 Hz. LRF0305C fits when mass is the limit and a 3 to 4 km reach is enough.
Price
Jenoptik lists no DLEM price on its page, and the datasheet has none either; the page offers an inquiry form and sales contacts in Germany and North America. ERDI prices are public: LRF0405C is $650 for 1 to 19 pieces, $600 for 20 to 100, $500 for 101 to 299, $450 for 300 to 499 and $400 from 500. Shipping is included.
Integration notes
- LRF0405C: UART 3.3 V TTL, connector FWF08002-S06B13W5M with five signals (power, ground, POWER_ON, TX, RX), POWER_ON control pin (module on above 2.7 V, off below 0.3 V), standby 1 mW or less, average power 2.5 W or less at 10 Hz.
- The supply entry differs between two tables of the same document: 3 to 5 V in the module specification and 4.5 to 16 V in the interface table. We confirm the delivered version in the quote before you design the power stage.
- The ERDI module document states Class I at module level. The final accessible-emission classification applies to the complete configuration.
- More on the wavelength choice: 905 nm vs 1535 nm and the 1535 nm UAV payload page.
Sources and dates
- Jenoptik DLEM family page: https://www.jenoptik.com/products/lasers/laser-distance-sensors/dlem, read 2026-11-13.
- Jenoptik DLEM datasheet (PDF): https://www.jenoptik.com/-/media/websitedocuments/optics/sensor/dlem-datasheet-20250901.pdf, read 2026-11-13.
- ERDI values: the model pages linked above and the published catalog, captured 2026-10-08, prices checked 2026-11-13.
Competitor values are the ones printed on the maker’s public page on the date shown. They may change, and test conditions differ between makers, so confirm against the current datasheet before you design in either part.
Frequently asked questions
Is there a lower-cost alternative to the Jenoptik DLEM 20?
ERDI LRF0405C is a 1535 nm module with 4,000 m or more at 30% reflectance for $650 at 1 to 19 pieces. Jenoptik does not publish a DLEM price, so request a quote from Jenoptik for the like-for-like comparison.
How accurate is the ERDI LRF0405C compared with the DLEM 20?
Jenoptik lists 0.5 m or better for the DLEM 20. The LRF0405C is specified at +/- 2 m, so choose the DLEM class if sub-metre accuracy is the requirement.
Which ERDI 1535 nm module is lightest?
The LRF0305C and the LRF0306C are both 14 g or less according to their spec tables. The LRF0405C is 32 g or less.
What interface does the ERDI LRF0405C use?
UART at 3.3 V TTL with a POWER_ON control input. Check the supply range with us, because two tables in the module document give different supply entries.
Does the ERDI LRF0405C report more than one target?
Yes. The module document states up to 3 targets, single shot or 1 to 10 Hz ranging, and a valid measurement rate of 98% or higher under the specified test conditions.
Where to go next
Model pages: LRF0405C, LRF0305C, LRF0306C, LRF0610C. To filter the whole range by distance, wavelength and interface, use the selector. Other comparisons are on the comparison hub, and every model price is on the price page. For a quote or a sample, email tommy@erdimail.com or use the contact page.