The Benewake TFmini Plus is an 11 g sensor with a 0.1 to 12 m range, 1 to 1,000 Hz frame rate and IP65 protection. The closest ERDI part is the LRF22VB: 0.05 to 20 m at 90% reflectivity, 1.5 g, 21 x 15 x 7.4 mm, $12 for 1 to 19 pieces with shipping included. For 9 m at 1 g the LRF10VB is $10.
Specification comparison
| Parameter | Benewake TFmini Plus (source) | LRF22VB | LRF10VB |
|---|---|---|---|
| Range | 0.1 to 12 m | 0.05 to 20 m at 90% reflectivity; 0.05 to 10 m at 10% | 0.05 to 9 m at 90%; 0.05 to 5 m at 10% |
| Frame rate | 1 to 1,000 Hz | 200 Hz (alternatives 100, 50, 20, 10, 1 Hz) | 50 Hz |
| Accuracy | +/- 5 cm at 0.1 to 5 m | +/- 5 cm below 5 m; 1% from 5 m | +/- 5 cm below 5 m; 1% from 5 m |
| Field of view | 3.6 degrees | 3 degrees | 3 degrees |
| Weight | About 11 g | 1.5 g | 1 g |
| Size | Not stated on the product page | 21 x 15 x 7.43 mm | 12 x 7.5 x 9.1 mm |
| Power | 550 mW (85 mW minimum) | Under 0.2 W average | Under 0.1 W, with a low-power mode |
| Supply | Not stated on the product page | 3 to 3.6 V DC | 4.5 to 5.5 V DC |
| Interface | UART, I/O, I2C; custom protocols on request | UART / I2C | UART |
| Protection | IP65 | No rating stated | No rating stated |
| Wavelength | Not stated on the product page | 905 nm, Class 1 | 940 nm, Class 1 |
| Price (USD) | Not published on the maker page | $12 for 1 to 19 pcs; $8 from 1,000 pcs | $10 for 1 to 19 pcs; $6 from 1,000 pcs |
Which one fits which job
TFmini Plus fits an outdoor or dusty mount without extra housing (IP65), and a design that already has a TFmini driver. LRF22VB fits a build that is limited by mass and board area, wants 20 m instead of 12 m, and runs from a 3.3 V rail with UART or I2C. LRF10VB is the smallest and lowest-priced ERDI module, for 9 m trigger or presence sensing on a 5 V rail.
Price
Benewake does not print a TFmini Plus price on the product page, so use a current distributor quote for the comparison. ERDI prices include shipping: LRF22VB is $12 for 1 to 19 pieces, $11 for 20 to 30, $10 for 31 to 500, $9 for 501 to 999 and $8 from 1,000. LRF10VB is $10 at 1 to 19 pieces and $6 from 1,000.
Integration notes
- LRF22VB: UART at 460,800 baud by default (adjustable), frame header 0x5C, distance in millimetres as a little-endian value (out-of-range reads 20,000), checksum is the inverted sum from the second to the second-last byte. I2C address 0x52.
- LRF22VB needs 3.0 to 3.6 V. Do not feed it 5 V. The LRF10VB runs on 4.5 to 5.5 V.
- Terminal: LRF22VB uses a 6-pin 0.8 mm connector with 20 cm wires.
- Wiring and parsing examples for common boards: ESP32, Raspberry Pi, STM32.
Sources and dates
- Benewake TFmini Plus: https://en.benewake.com/TFminiPlus/index.html, read 2026-11-13.
- ERDI values: the model pages linked above and the published catalog, captured 2026-10-08, prices checked 2026-11-13.
Competitor values are the ones printed on the maker’s public page on the date shown. They may change, and test conditions differ between makers, so confirm against the current datasheet before you design in either part.
Frequently asked questions
What is a cheaper alternative to the Benewake TFmini Plus?
ERDI LRF22VB covers 20 m at 90% reflectivity for $12 at 1 to 19 pieces, $8 from 1,000. The LRF10VB covers 9 m for $10. Benewake does not publish a TFmini Plus price on its own page.
Is the ERDI LRF22VB smaller than the TFmini Plus?
Yes. The LRF22VB weighs 1.5 g and measures 21 x 15 x 7.43 mm. Benewake lists about 11 g for the TFmini Plus.
Can I run the ERDI LRF22VB from 5 V?
No. It needs 3.0 to 3.6 V DC. The LRF10VB runs on 4.5 to 5.5 V and the LRF50VB on 3.3 to 5 V.
Does the ERDI LRF22VB have an IP rating like the TFmini Plus?
Benewake states IP65 for the TFmini Plus. The LRF22VB datasheet lists no protection rating, so it needs a housing or enclosure for outdoor use.
Does the ERDI LRF22VB support I2C?
Yes, UART and I2C. The I2C address is 0x52 in the datasheet. The LRF10VB is UART only.
Where to go next
Model pages: LRF22VB, LRF10VB, LRF50VB, LRF50H. To filter the whole range by distance, wavelength and interface, use the selector. Other comparisons are on the comparison hub, and every model price is on the price page. For a quote or a sample, email tommy@erdimail.com or use the contact page.