LRF50VB · 905 nm Single-Point LiDAR Sensor

LRF50VB accuracy and range test conditions

A range number needs a target and conditions. For the LRF50VB the published figure is 0.05–50 m (90% reflectivity); 0.05–20 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). Accuracy: ±5 cm (<5 m); 1% (≥5 m).

Range, accuracy and rate as published

Parameter	Published value	Condition / note
Measurement range	0.05–50 m (90% reflectivity); 0.05–20 m (10% reflectivity)	The two source values remain bound to their stated target reflectivity.
Measurement frequency	100 Hz	Confirm against the controlled model document
Accuracy	±5 cm (<5 m); 1% (≥5 m)	Confirm against the controlled model document
Repeatability	±30 mm	Confirm against the controlled model document
Ambient-light immunity	10 m at 60 klx	Confirm against the controlled model document
Reported resolution	1 mm	Front-page feature statement; not an accuracy value

How to read the conditions

Reflectivity is the fraction of laser light the target returns: a white board is about 90 percent, a building about 70 percent, grass and soil 10–30 percent. Visibility limits long-range figures because haze absorbs the pulse both ways. When two modules quote different targets, convert both to the same target before comparing; the open module database lists every vendor's condition next to its number.

Ordering the LRF50VB

The published single-unit price of the LRF50VB is $70, falling to $20 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: LRF50VB model page.

FAQ

What is the maximum range of the LRF50VB?

The published range is 0.05–50 m (90% reflectivity); 0.05–20 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.

Which interface does the LRF50VB use?

The published communication interface is UART/IIC.

What laser wavelength does the LRF50VB use?

The published wavelength is 905 nm; laser safety entry: Class 1.

How much does the LRF50VB cost?

The published single-unit price of the LRF50VB is $70, falling to $20 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com.

Related guides

Model records

Open the model page for the full specification table, downloads, published price and ordering.

LRF50VB — LRF50VB 905 nm Single-Point LiDAR Sensor
LRF50H — LRF50H 905 nm LiDAR Distance Sensor
LRF22VB — LRF22VB 905 nm Single-Point LiDAR Sensor
LRF10VB — LRF10VB 940 nm Single-Point LiDAR Sensor
LRF100H — LRF100H 905 nm LiDAR Distance Sensor