LRF600H · 905 nm LiDAR Distance Sensor
LRF600H accuracy and range test conditions
A range number needs a target and conditions. For the LRF600H the published figure is 0.05–600 m (90% reflectivity); 0.05–200 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). Accuracy: ±10 cm (<10 m); 1% (≥10 m).
Range, accuracy and rate as published
| Parameter | Published value | Condition / note |
|---|---|---|
| Measurement range | 0.05–600 m (90% reflectivity); 0.05–200 m (10% reflectivity) | The two source values remain bound to their stated target reflectivity. |
| Measurement frequency | 1 kHz or 50 Hz (automatically switched to match reflected-signal intensity) | Confirm against the controlled model document |
| Accuracy | ±10 cm (<10 m); 1% (≥10 m) | Confirm against the controlled model document |
| Repeatability | ±5 cm (<10 m); ±50 cm at 600 m | Confirm against the controlled model document |
| Ambient-light immunity | 100 klx | Confirm against the controlled model document |
| Reported resolution | 1 cm | Front-page feature statement; not an accuracy value |
How to read the conditions
Reflectivity is the fraction of laser light the target returns: a white board is about 90 percent, a building about 70 percent, grass and soil 10–30 percent. Visibility limits long-range figures because haze absorbs the pulse both ways. When two modules quote different targets, convert both to the same target before comparing; the open module database lists every vendor's condition next to its number.
Ordering the LRF600H
The published single-unit price of the LRF600H is $350, falling to $160 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com. Technical questions and quantity quotes: tommy@erdimail.com. Full specification table, downloads and ordering: LRF600H model page.
FAQ
What is the maximum range of the LRF600H?
The published range is 0.05–600 m (90% reflectivity); 0.05–200 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.). A range figure is only comparable together with the target and conditions it was measured on, so the condition is listed next to the value.
Which interface does the LRF600H use?
The published communication interface is UART/IIC.
What laser wavelength does the LRF600H use?
The published wavelength is 905 nm; laser safety entry: Class 1.
How much does the LRF600H cost?
The published single-unit price of the LRF600H is $350, falling to $160 per unit at the largest published quantity band. Prices include shipping and are ordered directly from erdilrf.com.
Related guides
- LRF600H datasheet and specifications
- LRF600H UART wiring, pinout and protocol
- LRF600H Pixhawk / ArduPilot setup
- LRF600H ROS 2 driver
- LRF600H Arduino library
- LRF600H Raspberry Pi Python reader
- LRF600H price and ordering
- LRF600H power supply and current
- LRF600H dimensions and weight
- UART laser rangefinder modules
- I2C laser rangefinder modules
- 905 nm laser rangefinder modules
- Class 1 laser rangefinder modules
- AGV obstacle avoidance laser rangefinder modules
- security and perimeter monitoring laser rangefinder modules
- industrial and level measurement laser rangefinder modules
Model records
Open the model page for the full specification table, downloads, published price and ordering.